[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aDCf84cRw0tmcAbm@calculate>
Date: Sat, 24 May 2025 00:18:59 +0800
From: Zixian Zeng <sycamoremoon376@...il.com>
To: Michael Walle <mwalle@...nel.org>,
Tudor Ambarus <tudor.ambarus@...aro.org>,
Pratyush Yadav <pratyush@...nel.org>,
Miquel Raynal <miquel.raynal@...tlin.com>,
Richard Weinberger <richard@....at>,
Vignesh Raghavendra <vigneshr@...com>,
Chen Wang <unicorn_wang@...look.com>,
Inochi Amaoto <inochiama@...il.com>,
Mark Brown <broonie@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>,
Longbin Li <looong.bin@...il.com>
Cc: linux-mtd@...ts.infradead.org, linux-kernel@...r.kernel.org,
sophgo@...ts.linux.dev, linux-spi@...r.kernel.org,
devicetree@...r.kernel.org, linux-riscv@...ts.infradead.org,
dlan@...too.org, ziyao@...root.org
Subject: Re: [PATCH 2/3] mtd: spi-nor: Add GD25LB512ME GigaDevice flash_info
Hi, Michael, Thank you for your reviews.
On Fri, May 23, 2025 at 01:16:50PM +0200, Michael Walle wrote:
> Hi,
>
> > Add GD25LB512ME SPI-NOR flash information
>
> Please have a look at [1].
>
> This flash supports SFDP, do you really need a new entry in the
> flashdb? Could you try without it?
>
> In any case, could you please dump the SFDP see [1], too.
>
> [1] https://docs.kernel.org/driver-api/mtd/spi-nor.html
>
> -michael
I was following the testing requirements from [1].
Before that, I have applied the patch:
"mtd: spi-nor: Add GD25LB512ME GigaDevice flash_info"
Because without this patch, the spi-nor device cannot be detected normally.
------------------------------- LOG ------------------------------------
root@...alhost ~ # dmesg | grep -i spi
[ 10.199526] spi-nor spi0.0: supply vcc not found, using dummy regulator
[ 11.206477] spi-nor spi0.0: unrecognized JEDEC id bytes: c8 67 1a ff c8 67
[ 11.213691] spi-nor spi1.0: supply vcc not found, using dummy regulator
[ 12.220614] spi-nor spi1.0: unrecognized JEDEC id bytes: c8 67 1a ff c8 67
root@...alhost ~ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
cat: /sys/bus/spi/devices/spi0.0/spi-nor/partname: No such file or directory
Testing output atfer that patch:
------------------------------------------------------------------------
This flash is populated on the SG2042 Pioneer board and was tested at
100MHz frequency using the spi-sg2044-nor SPI controller.
root@...alhost ~ # cat /sys/bus/spi/devices/spi0.0/spi-nor/partname
gd25lb512me
root@...alhost ~ # cat /sys/bus/spi/devices/spi0.0/spi-nor/jedec_id
c8671a
root@...alhost ~ # cat /sys/bus/spi/devices/spi0.0/spi-nor/manufacturer
gigadevice
root@...alhost ~ # xxd -p /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
53464450060102ff00060110300000ffc8000103900000ff84000102c000
00ffffffffffffffffffffffffffffffffffe520eaffffffff1f44eb086b
003b00bbfeffffffffff00ffffff44eb0c200f5210d800ffd531b1fe83d6
1458ec6006337a757a7504bdd55c2906740008500001ffffffffffffffff
ffffffffffffffffffffffffffffffffffffffffffffffff002050169df9
8156d9c8ffffffffffffffffffffffffffffffffffffffffffffffffffff
fffffffffffffffffffffffff38ff0ff215cdcff
root@...alhost ~ # sha256sum /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
859eb314b0500aa3e3dc5a1ad514f1013387c7aaa40147ed2d616ffc4b6d851c /sys/bus/spi/devices/spi0.0/spi-nor/sfdp
root@...alhost ~ # #Dump debugfs data
root@...alhost ~ # cat /sys/kernel/debug/spi-nor/spi0.0/capabilities
Supported read modes by the flash
1S-1S-1S
opcode 0x13
mode cycles 0
dummy cycles 0
1S-1S-4S
opcode 0x6c
mode cycles 0
dummy cycles 8
1S-4S-4S
opcode 0xec
mode cycles 2
dummy cycles 4
4S-4S-4S
opcode 0xec
mode cycles 2
dummy cycles 4
Supported page program modes by the flash
1S-1S-1S
opcode 0x12
1S-1S-4S
opcode 0x34
1S-4S-4S
opcode 0x3e
root@...alhost ~ # cat /sys/kernel/debug/spi-nor/spi0.0/params
name gd25lb512me
id c8 67 1a ff c8 67
size 64.0 MiB
write size 1
page size 256
address nbytes 4
flags HAS_SR_TB | 4B_OPCODES | HAS_4BAIT | HAS_LOCK | HAS_16BIT_SR | SOFT_RESET
opcodes
read 0x13
dummy cycles 0
erase 0x21
program 0x12
8D extension none
protocols
read 1S-1S-1S
write 1S-1S-1S
register 1S-1S-1S
erase commands
21 (4.00 KiB) [1]
5c (32.0 KiB) [2]
dc (64.0 KiB) [3]
c7 (64.0 MiB)
sector map
region (in hex) | erase mask | overlaid
------------------+------------+----------
00000000-03ffffff | [ 1 ] | no
root@...alhost ~ # dd if=/dev/urandom of=./spi_test bs=1M count=2
2+0 records in
2+0 records out
2097152 bytes (2.1 MB, 2.0 MiB) copied, 0.0279486 s, 75.0 MB/s
root@...alhost ~ # mtd_debug erase /dev/mtd0 0 2097152
Erased 2097152 bytes from address 0x00000000 in flash
root@...alhost ~ # mtd_debug read /dev/mtd0 0 2097152 spi_read
Copied 2097152 bytes from address 0x00000000 in flash to spi_read
root@...alhost ~ # hexdump spi_read
0000000 ffff ffff ffff ffff ffff ffff ffff ffff
*
0200000
root@...alhost ~ # sha256sum spi_read
4bda3a28f4ffe603c0ec1258c0034d65a1a0d35ab7bd523a834608adabf03cc5 spi_read
root@...alhost ~ # mtd_debug write /dev/mtd0 0 2097152 spi_test
Copied 2097152 bytes from spi_test to address 0x00000000 in flash
root@...alhost ~ # mtd_debug read /dev/mtd0 0 2097152 spi_read
Copied 2097152 bytes from address 0x00000000 in flash to spi_read
root@...alhost ~ # sha256sum spi*
a2ebfaebe38974847a4efb628b29a72f1d50e78c17318869d8954b033dc32e5d spi_read
a2ebfaebe38974847a4efb628b29a72f1d50e78c17318869d8954b033dc32e5d spi_test
root@...alhost ~ # mtd_debug info /dev/mtd0
mtd.type = MTD_NORFLASH
mtd.flags = MTD_CAP_NORFLASH
mtd.size = 67108864 (64M)
mtd.erasesize = 4096 (4K)
mtd.writesize = 1
mtd.oobsize = 0
regions = 0
------------------------------------------------------------------------
Best regards,
Zixian
Powered by blists - more mailing lists