[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250523-fpg-nxp-imx93-frdm-v1-0-546b2d342855@pengutronix.de>
Date: Fri, 23 May 2025 20:16:47 +0200
From: Fabian Pflug <f.pflug@...gutronix.de>
To: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org,
Fabian Pflug <f.pflug@...gutronix.de>
Subject: [PATCH 0/2] Add devicetree for NXP i.MX93 FRDM board
I could not test all features of the board, therefore a lot of stuff is
omitted from the devicetree. but this is enough to have the board boot
via eMMC or SD-Card, debug via debug USB connector and have a network
connection.
The FRDM i.MX 93 development board is a low-cost and compact development
board featuring the i.MX93 applications processor.
It features:
- Dual Cortex-A55
- 2 GB LPDDR4X / LPDDR4
- 32 GB eMMC5.1
- MicroSD slot
- GbE RJ45 x 2
- USB2.0 1x Type C, 1x Type A
This file is based upon the one provided by nxp in their own kernel and
yocto meta layer for the device, but adapted for mainline.
Signed-off-by: Fabian Pflug <f.pflug@...gutronix.de>
---
Fabian Pflug (2):
ARM: dts: freescale: add support for NXP i.MX93 FRDM
dt-bindings: arm: fsl: add i.MX93 11x11 FRDM board
Documentation/devicetree/bindings/arm/fsl.yaml | 1 +
arch/arm64/boot/dts/freescale/Makefile | 1 +
arch/arm64/boot/dts/freescale/imx93-11x11-frdm.dts | 630 +++++++++++++++++++++
3 files changed, 632 insertions(+)
---
base-commit: 94305e83eccb3120c921cd3a015cd74731140bac
change-id: 20250523-fpg-nxp-imx93-frdm-5cc180a1fda9
Best regards,
--
Fabian Pflug <f.pflug@...gutronix.de>
Powered by blists - more mailing lists