[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <174799708047.447283.7488479214082467414@localhost>
Date: Fri, 23 May 2025 12:44:40 +0200
From: Stefan Klug <stefan.klug@...asonboard.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Dafna Hirschfeld <dafna@...tmail.com>, Mauro Carvalho Chehab <mchehab@...nel.org>, Heiko Stuebner <heiko@...ech.de>, linux-media@...r.kernel.org, linux-rockchip@...ts.infradead.org, linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org, Paul Elder <paul.elder@...asonboard.com>
Subject: Re: [PATCH v2 1/2] media: rkisp1: Add RKISP1_CID_SUPPORTED_PARAMS_BLOCKS control
Hi Laurent,
Thank you for the review.
Quoting Laurent Pinchart (2025-05-23 12:33:46)
> Hi Stefan,
>
> Thank you for the patch.
>
> On Fri, May 23, 2025 at 12:07:31PM +0200, Stefan Klug wrote:
> > Add a RKISP1_CID_SUPPORTED_PARAMS_BLOCKS V4L2 control to be able to
> > query the parameters blocks supported by the current kernel on the
> > current hardware from user space.
> >
> > As a drive-by fix handle an (very unlikely) error in
> > rkisp1_params_init_vb2_queue().
>
> "While at it" changes are fine for very minor changes, but this is a fix
> (even if it fixes a minor issue), so it should be a separate patch.
Dang. It was so small that I even considered completely dropping it.
I'll wait a bit for further feedback and then post a v3 with the patch
split out again.
>
> > Signed-off-by: Stefan Klug <stefan.klug@...asonboard.com>
> > Reviewed-by: Paul Elder <paul.elder@...asonboard.com>
> >
> > ---
> >
> > Changes in v2:
> > - Added docs improvements from review
> > - Moved ctrl_config declaration to top
> > - Moved rkisp1_params_init_vb2_queue() return check into this patch as
> > the previous patch got dropped
> > - Call rkisp1_ctrl_init() after media_entity_pads_init() for easier
> > error handling
> > ---
> > .../media/platform/rockchip/rkisp1/rkisp1-common.h | 2 +
> > .../media/platform/rockchip/rkisp1/rkisp1-params.c | 57 ++++++++++++++++++++--
> > include/uapi/linux/rkisp1-config.h | 9 ++++
> > include/uapi/linux/v4l2-controls.h | 6 +++
> > 4 files changed, 70 insertions(+), 4 deletions(-)
> >
> > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> > index ca952fd0829b..5f187f9efc7b 100644
> > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-common.h
> > @@ -415,6 +415,8 @@ struct rkisp1_params {
> > spinlock_t config_lock; /* locks the buffers list 'params' */
> > struct list_head params;
> >
> > + struct v4l2_ctrl_handler ctrls;
> > +
> > const struct v4l2_meta_format *metafmt;
> >
> > enum v4l2_quantization quantization;
> > diff --git a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
> > index b28f4140c8a3..b276926beb3c 100644
> > --- a/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
> > +++ b/drivers/media/platform/rockchip/rkisp1/rkisp1-params.c
> > @@ -2736,6 +2736,44 @@ static int rkisp1_params_init_vb2_queue(struct vb2_queue *q,
> > return vb2_queue_init(q);
> > }
> >
> > +static int rkisp1_ctrl_init(struct rkisp1_params *params)
>
> s/rkisp1_ctrl_init/rkisp1_params_ctrl_init/
>
> > +{
> > + struct v4l2_ctrl_config ctrl_config = {
> > + .id = RKISP1_CID_SUPPORTED_PARAMS_BLOCKS,
> > + .name = "Supported Params Blocks",
> > + .type = V4L2_CTRL_TYPE_BITMASK,
> > + .flags = V4L2_CTRL_FLAG_READ_ONLY,
> > + };
> > + int ret;
> > +
> > + v4l2_ctrl_handler_init(¶ms->ctrls, 1);
> > +
> > + for (unsigned int i = 0; i < ARRAY_SIZE(rkisp1_ext_params_handlers); i++) {
> > + const struct rkisp1_ext_params_handler *block_handler;
> > +
> > + block_handler = &rkisp1_ext_params_handlers[i];
> > + ctrl_config.max |= BIT(i);
> > +
> > + if ((params->rkisp1->info->features & block_handler->features) !=
> > + block_handler->features)
> > + continue;
> > +
> > + ctrl_config.def |= BIT(i);
> > + }
> > +
> > + v4l2_ctrl_new_custom(¶ms->ctrls, &ctrl_config, NULL);
> > +
> > + params->vnode.vdev.ctrl_handler = ¶ms->ctrls;
> > +
> > + if (params->ctrls.error) {
> > + ret = params->ctrls.error;
> > + v4l2_ctrl_handler_free(¶ms->ctrls);
> > + return ret;
> > + }
> > +
> > + return 0;
> > +}
> > +
> > int rkisp1_params_register(struct rkisp1_device *rkisp1)
> > {
> > struct rkisp1_params *params = &rkisp1->params;
> > @@ -2763,7 +2801,9 @@ int rkisp1_params_register(struct rkisp1_device *rkisp1)
> > vdev->queue = &node->buf_queue;
> > vdev->device_caps = V4L2_CAP_STREAMING | V4L2_CAP_META_OUTPUT;
> > vdev->vfl_dir = VFL_DIR_TX;
> > - rkisp1_params_init_vb2_queue(vdev->queue, params);
> > + ret = rkisp1_params_init_vb2_queue(vdev->queue, params);
> > + if (ret)
> > + goto err_media;
> >
> > params->metafmt = &rkisp1_params_formats[RKISP1_PARAMS_FIXED];
> >
> > @@ -2777,18 +2817,26 @@ int rkisp1_params_register(struct rkisp1_device *rkisp1)
> > node->pad.flags = MEDIA_PAD_FL_SOURCE;
> > ret = media_entity_pads_init(&vdev->entity, 1, &node->pad);
> > if (ret)
> > - goto error;
> > + goto err_media;
> > +
> > + ret = rkisp1_ctrl_init(params);
> > + if (ret) {
> > + dev_err(rkisp1->dev, "Control initialization error %d\n", ret);
> > + goto err_media;
> > + }
> >
> > ret = video_register_device(vdev, VFL_TYPE_VIDEO, -1);
> > if (ret) {
> > dev_err(rkisp1->dev,
> > "failed to register %s, ret=%d\n", vdev->name, ret);
> > - goto error;
> > + goto err_ctrl;
> > }
> >
> > return 0;
> >
> > -error:
> > +err_ctrl:
> > + v4l2_ctrl_handler_free(¶ms->ctrls);
> > +err_media:
> > media_entity_cleanup(&vdev->entity);
> > mutex_destroy(&node->vlock);
> > return ret;
> > @@ -2804,6 +2852,7 @@ void rkisp1_params_unregister(struct rkisp1_device *rkisp1)
> > return;
> >
> > vb2_video_unregister_device(vdev);
> > + v4l2_ctrl_handler_free(¶ms->ctrls);
> > media_entity_cleanup(&vdev->entity);
> > mutex_destroy(&node->vlock);
> > }
> > diff --git a/include/uapi/linux/rkisp1-config.h b/include/uapi/linux/rkisp1-config.h
> > index 2d995f3c1ca3..85c1b02f3f78 100644
> > --- a/include/uapi/linux/rkisp1-config.h
> > +++ b/include/uapi/linux/rkisp1-config.h
> > @@ -1086,6 +1086,9 @@ enum rkisp1_ext_params_block_type {
> > #define RKISP1_EXT_PARAMS_FL_BLOCK_DISABLE (1U << 0)
> > #define RKISP1_EXT_PARAMS_FL_BLOCK_ENABLE (1U << 1)
> >
> > +/* A bitmask of parameters blocks supported on the current hardware. */
> > +#define RKISP1_CID_SUPPORTED_PARAMS_BLOCKS (V4L2_CID_USER_RKISP1_BASE + 0x01)
> > +
> > /**
> > * struct rkisp1_ext_params_block_header - RkISP1 extensible parameters block
> > * header
> > @@ -1520,6 +1523,12 @@ enum rksip1_ext_param_buffer_version {
> > * V4L2 control. If such control is not available, userspace should assume only
> > * RKISP1_EXT_PARAM_BUFFER_V1 is supported by the driver.
> > *
> > + * The read-only V4L2 control ``RKISP1_CID_SUPPORTED_PARAMS_BLOCKS`` can be used
> > + * to query the blocks supported by the device. It contains a bitmask where each
> > + * bit represents the availability of the corresponding entry from the
> > + * :c:type:`rkisp1_ext_params_block_type` enum. The max value of the control
> > + * represents the blocks supported by the kernel (independent of the device).
>
> Have you seen my comment in v1 ?
>
> * from the :c:type:`rkisp1_ext_params_block_type` enum. The current and default
> * values of the control represents the blocks supported by the device instance,
> * while the maximum value represents the blocks supported by the kernel driver,
> * independently of the device instance.
Oh sorry, I missed those lines. I'll add them in v3.
Best regards,
Stefan
>
> > + *
> > * For each ISP block that userspace wants to configure, a block-specific
> > * structure is appended to the @data buffer, one after the other without gaps
> > * in between nor overlaps. Userspace shall populate the @data_size field with
> > diff --git a/include/uapi/linux/v4l2-controls.h b/include/uapi/linux/v4l2-controls.h
> > index 72e32814ea83..f836512e9deb 100644
> > --- a/include/uapi/linux/v4l2-controls.h
> > +++ b/include/uapi/linux/v4l2-controls.h
> > @@ -222,6 +222,12 @@ enum v4l2_colorfx {
> > */
> > #define V4L2_CID_USER_UVC_BASE (V4L2_CID_USER_BASE + 0x11e0)
> >
> > +/*
> > + * The base for Rockchip ISP1 driver controls.
> > + * We reserve 16 controls for this driver.
> > + */
> > +#define V4L2_CID_USER_RKISP1_BASE (V4L2_CID_USER_BASE + 0x1220)
> > +
> > /* MPEG-class control IDs */
> > /* The MPEG controls are applicable to all codec controls
> > * and the 'MPEG' part of the define is historical */
>
> --
> Regards,
>
> Laurent Pinchart
Powered by blists - more mailing lists