lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1748171710-1375837-3-git-send-email-tariqt@nvidia.com>
Date: Sun, 25 May 2025 14:15:08 +0300
From: Tariq Toukan <tariqt@...dia.com>
To: "David S. Miller" <davem@...emloft.net>, Jakub Kicinski <kuba@...nel.org>,
	Paolo Abeni <pabeni@...hat.com>, Eric Dumazet <edumazet@...gle.com>, "Andrew
 Lunn" <andrew+netdev@...n.ch>
CC: Saeed Mahameed <saeedm@...dia.com>, Leon Romanovsky <leon@...nel.org>,
	Tariq Toukan <tariqt@...dia.com>, <netdev@...r.kernel.org>,
	<linux-rdma@...r.kernel.org>, <linux-kernel@...r.kernel.org>, Moshe Shemesh
	<moshe@...dia.com>, Mark Bloch <mbloch@...dia.com>, Vlad Dogaru
	<vdogaru@...dia.com>, Yevgeny Kliteynik <kliteyn@...dia.com>, Gal Pressman
	<gal@...dia.com>
Subject: [PATCH net-next 2/4] net/mlx5: HWS, make sure the uplink is the last destination

From: Vlad Dogaru <vdogaru@...dia.com>

If a destination array action contains a wire destination, it has
to be the last one in the array. Replicate the check we had for
software steering to avoid a firmware error.

Signed-off-by: Vlad Dogaru <vdogaru@...dia.com>
Signed-off-by: Yevgeny Kliteynik <kliteyn@...dia.com>
Reviewed-by: Mark Bloch <mbloch@...dia.com>
Signed-off-by: Tariq Toukan <tariqt@...dia.com>
---
 .../mellanox/mlx5/core/steering/hws/action.c  | 19 ++++++++++++-------
 .../mellanox/mlx5/core/steering/hws/fs_hws.c  |  3 +++
 .../mellanox/mlx5/core/steering/hws/mlx5hws.h |  1 +
 3 files changed, 16 insertions(+), 7 deletions(-)

diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c
index fb62f3bc4bd4..592f3a2ede2e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/action.c
@@ -1370,8 +1370,8 @@ mlx5hws_action_create_dest_array(struct mlx5hws_context *ctx,
 	struct mlx5hws_cmd_set_fte_attr fte_attr = {0};
 	struct mlx5hws_cmd_forward_tbl *fw_island;
 	struct mlx5hws_action *action;
-	u32 i /*, packet_reformat_id*/;
-	int ret;
+	int ret, last_dest_idx = -1;
+	u32 i;
 
 	if (num_dest <= 1) {
 		mlx5hws_err(ctx, "Action must have multiple dests\n");
@@ -1401,11 +1401,8 @@ mlx5hws_action_create_dest_array(struct mlx5hws_context *ctx,
 			dest_list[i].destination_id = dests[i].dest->dest_obj.obj_id;
 			fte_attr.action_flags |= MLX5_FLOW_CONTEXT_ACTION_FWD_DEST;
 			fte_attr.ignore_flow_level = ignore_flow_level;
-			/* ToDo: In SW steering we have a handling of 'go to WIRE'
-			 * destination here by upper layer setting 'is_wire_ft' flag
-			 * if the destination is wire.
-			 * This is because uplink should be last dest in the list.
-			 */
+			if (dests[i].is_wire_ft)
+				last_dest_idx = i;
 			break;
 		case MLX5HWS_ACTION_TYP_VPORT:
 			dest_list[i].destination_type = MLX5_FLOW_DESTINATION_TYPE_VPORT;
@@ -1429,6 +1426,14 @@ mlx5hws_action_create_dest_array(struct mlx5hws_context *ctx,
 		}
 	}
 
+	if (last_dest_idx != -1) {
+		struct mlx5hws_cmd_set_fte_dest tmp;
+
+		tmp = dest_list[last_dest_idx];
+		dest_list[last_dest_idx] = dest_list[num_dest - 1];
+		dest_list[num_dest - 1] = tmp;
+	}
+
 	fte_attr.dests_num = num_dest;
 	fte_attr.dests = dest_list;
 
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/fs_hws.c b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/fs_hws.c
index 9d1c0e4b224a..ab1a4c7f1813 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/fs_hws.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/fs_hws.c
@@ -966,6 +966,9 @@ static int mlx5_fs_fte_get_hws_actions(struct mlx5_flow_root_namespace *ns,
 			switch (attr->type) {
 			case MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE:
 				dest_action = mlx5_fs_get_dest_action_ft(fs_ctx, dst);
+				if (dst->dest_attr.ft->flags &
+				    MLX5_FLOW_TABLE_UPLINK_VPORT)
+					dest_actions[num_dest_actions].is_wire_ft = true;
 				break;
 			case MLX5_FLOW_DESTINATION_TYPE_FLOW_TABLE_NUM:
 				dest_action = mlx5_fs_get_dest_action_table_num(fs_ctx,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws.h b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws.h
index 9bbadc4d8a0b..d8ac6c196211 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/steering/hws/mlx5hws.h
@@ -213,6 +213,7 @@ struct mlx5hws_action_dest_attr {
 	struct mlx5hws_action *dest;
 	/* Optional reformat action */
 	struct mlx5hws_action *reformat;
+	bool is_wire_ft;
 };
 
 /**
-- 
2.31.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ