linux-kernel - [PATCH v2 3/5] thermal/drivers: airoha: Generalize get_thermal_ADC and set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250527215241.25767-4-ansuelsmth@gmail.com>
Date: Tue, 27 May 2025 23:52:37 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: "Rafael J. Wysocki" <rafael@...nel.org>,
	Daniel Lezcano <daniel.lezcano@...aro.org>,
	Zhang Rui <rui.zhang@...el.com>,
	Lukasz Luba <lukasz.luba@....com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Christian Marangi <ansuelsmth@...il.com>,
	linux-pm@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Subject: [PATCH v2 3/5] thermal/drivers: airoha: Generalize get_thermal_ADC and set_mux function

In preparation for support of Airoha AN7583, generalize
get_thermal_ADC() and set_thermal_mux() with the use of reg_field API.

This is to account the same logic between the current supported SoC and
the new one but with different register address.

While at it also further improve some comments and move sleep inside the
set_thermal_mux function.

Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
 drivers/thermal/airoha_thermal.c | 54 +++++++++++++++++++++++++-------
 1 file changed, 42 insertions(+), 12 deletions(-)

diff --git a/drivers/thermal/airoha_thermal.c b/drivers/thermal/airoha_thermal.c
index 9bfa59b97032..4c973cce106a 100644
--- a/drivers/thermal/airoha_thermal.c
+++ b/drivers/thermal/airoha_thermal.c
@@ -193,9 +193,18 @@
 
 #define AIROHA_MAX_SAMPLES			6
 
+enum airoha_thermal_chip_scu_field {
+	AIROHA_THERMAL_DOUT_TADC,
+	AIROHA_THERMAL_MUX_TADC,
+
+	/* keep last */
+	AIROHA_THERMAL_FIELD_MAX,
+};
+
 struct airoha_thermal_priv {
 	struct regmap *map;
 	struct regmap *chip_scu;
+	struct regmap_field *chip_scu_fields[AIROHA_THERMAL_FIELD_MAX];
 	struct resource scu_adc_res;
 
 	u32 pllrg_protect;
@@ -219,22 +228,29 @@ static int airoha_get_thermal_ADC(struct airoha_thermal_priv *priv)
 {
 	u32 val;
 
-	regmap_read(priv->chip_scu, EN7581_DOUT_TADC, &val);
-	return FIELD_GET(EN7581_DOUT_TADC_MASK, val);
+	regmap_field_read(priv->chip_scu_fields[AIROHA_THERMAL_DOUT_TADC],
+			  &val);
+	return val;
 }
 
-static void airoha_init_thermal_ADC_mode(struct airoha_thermal_priv *priv)
+static void airoha_set_thermal_mux(struct airoha_thermal_priv *priv,
+				   int tdac_idx)
 {
-	u32 adc_mux, pllrg;
+	u32 pllrg;
 
 	/* Save PLLRG current value */
 	regmap_read(priv->chip_scu, EN7581_PLLRG_PROTECT, &pllrg);
 
-	/* Give access to thermal regs */
+	/* Give access to Thermal regs */
 	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT,
 		     priv->pllrg_protect);
-	adc_mux = FIELD_PREP(EN7581_MUX_TADC, EN7581_SCU_THERMAL_MUX_DIODE1);
-	regmap_write(priv->chip_scu, EN7581_PWD_TADC, adc_mux);
+
+	/* Configure Thermal ADC mux to tdac_idx */
+	regmap_field_write(priv->chip_scu_fields[AIROHA_THERMAL_MUX_TADC],
+			   tdac_idx);
+
+	/* Sleep 10 ms for Thermal ADC to enable */
+	usleep_range(10 * USEC_PER_MSEC, 11 * USEC_PER_MSEC);
 
 	/* Restore PLLRG value on exit */
 	regmap_write(priv->chip_scu, EN7581_PLLRG_PROTECT, pllrg);
@@ -343,10 +359,8 @@ static void en7581_thermal_setup_adc_val(struct device *dev,
 {
 	u32 efuse_calib_info, cpu_sensor;
 
-	/* Setup thermal sensor to ADC mode and setup the mux to DIODE1 */
-	airoha_init_thermal_ADC_mode(priv);
-	/* sleep 10 ms for ADC to enable */
-	usleep_range(10 * USEC_PER_MSEC, 11 * USEC_PER_MSEC);
+	/* Setup Thermal Sensor to ADC mode and setup the mux to DIODE1 */
+	airoha_set_thermal_mux(priv, EN7581_SCU_THERMAL_MUX_DIODE1);
 
 	regmap_read(priv->map, EN7581_EFUSE_TEMP_OFFSET_REG, &efuse_calib_info);
 	if (efuse_calib_info) {
@@ -429,13 +443,18 @@ static const struct regmap_config en7581_thermal_regmap_config = {
 	.val_bits		= 32,
 };
 
+static const struct reg_field en7581_chip_scu_fields[AIROHA_THERMAL_FIELD_MAX] = {
+	[AIROHA_THERMAL_DOUT_TADC] = REG_FIELD(EN7581_DOUT_TADC, 0, 15),
+	[AIROHA_THERMAL_MUX_TADC] = REG_FIELD(EN7581_PWD_TADC, 1, 3),
+};
+
 static int en7581_thermal_probe(struct platform_device *pdev,
 				struct airoha_thermal_priv *priv)
 {
 	struct device_node *chip_scu_np;
 	struct device *dev = &pdev->dev;
 	void __iomem *base;
-	int irq, ret;
+	int i, irq, ret;
 
 	base = devm_platform_ioremap_resource(pdev, 0);
 	if (IS_ERR(base))
@@ -454,6 +473,17 @@ static int en7581_thermal_probe(struct platform_device *pdev,
 	if (IS_ERR(priv->chip_scu))
 		return PTR_ERR(priv->chip_scu);
 
+	for (i = 0; i < AIROHA_THERMAL_FIELD_MAX; i++) {
+		struct regmap_field *field;
+
+		field = devm_regmap_field_alloc(dev, priv->chip_scu,
+						en7581_chip_scu_fields[i]);
+		if (IS_ERR(field))
+			return PTR_ERR(field);
+
+		priv->chip_scu_fields[i] = field;
+	}
+
 	of_address_to_resource(chip_scu_np, 0, &priv->scu_adc_res);
 	of_node_put(chip_scu_np);
 
-- 
2.48.1