lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250527222040.32000-2-ansuelsmth@gmail.com>
Date: Wed, 28 May 2025 00:20:33 +0200
From: Christian Marangi <ansuelsmth@...il.com>
To: Lorenzo Bianconi <lorenzo@...nel.org>,
	Linus Walleij <linus.walleij@...aro.org>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Sean Wang <sean.wang@...nel.org>,
	Matthias Brugger <matthias.bgg@...il.com>,
	AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
	Benjamin Larsson <benjamin.larsson@...exis.eu>,
	linux-mediatek@...ts.infradead.org,
	linux-gpio@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org
Cc: Christian Marangi <ansuelsmth@...il.com>,
	stable@...r.kernel.org
Subject: [PATCH 1/6] pinctrl: airoha: fix wrong PHY LED mux value for LED1 GPIO46

In all the MUX value for LED1 GPIO46 there is a Copy-Paste error where
the MUX value is set to LED0_MODE_MASK instead of LED1_MODE_MASK.

This wasn't notice as there were no board that made use of the
secondary PHY LED but looking at the internal Documentation the actual
value should be LED1_MODE_MASK similar to the other GPIO entry.

Fix the wrong value to apply the correct MUX configuration.

Cc: stable@...r.kernel.org
Fixes: 1c8ace2d0725 ("pinctrl: airoha: Add support for EN7581 SoC")
Signed-off-by: Christian Marangi <ansuelsmth@...il.com>
---
 drivers/pinctrl/mediatek/pinctrl-airoha.c | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/pinctrl/mediatek/pinctrl-airoha.c b/drivers/pinctrl/mediatek/pinctrl-airoha.c
index b97b28ebb37a..8ef7f88477aa 100644
--- a/drivers/pinctrl/mediatek/pinctrl-airoha.c
+++ b/drivers/pinctrl/mediatek/pinctrl-airoha.c
@@ -1752,8 +1752,8 @@ static const struct airoha_pinctrl_func_group phy1_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1816,8 +1816,8 @@ static const struct airoha_pinctrl_func_group phy2_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1880,8 +1880,8 @@ static const struct airoha_pinctrl_func_group phy3_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
@@ -1944,8 +1944,8 @@ static const struct airoha_pinctrl_func_group phy4_led1_func_group[] = {
 		.regmap[0] = {
 			AIROHA_FUNC_MUX,
 			REG_GPIO_2ND_I2C_MODE,
-			GPIO_LAN3_LED0_MODE_MASK,
-			GPIO_LAN3_LED0_MODE_MASK
+			GPIO_LAN3_LED1_MODE_MASK,
+			GPIO_LAN3_LED1_MODE_MASK
 		},
 		.regmap[1] = {
 			AIROHA_FUNC_MUX,
-- 
2.48.1


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ