linux-kernel - [PATCH v2 5/5] arm64: dts: qcom: ipq5018: Add GE PHY to internal mdio bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250528-ipq5018-ge-phy-v2-5-dd063674c71c@outlook.com>
Date: Wed, 28 May 2025 18:45:51 +0400
From: George Moussalem via B4 Relay <devnull+george.moussalem.outlook.com@...nel.org>
To: Andrew Lunn <andrew@...n.ch>, Heiner Kallweit <hkallweit1@...il.com>, 
 Russell King <linux@...linux.org.uk>, 
 "David S. Miller" <davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>, 
 Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>, 
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Florian Fainelli <f.fainelli@...il.com>, 
 Philipp Zabel <p.zabel@...gutronix.de>, 
 Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>, 
 Michael Turquette <mturquette@...libre.com>, 
 Stephen Boyd <sboyd@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
 linux-clk@...r.kernel.org, George Moussalem <george.moussalem@...look.com>
Subject: [PATCH v2 5/5] arm64: dts: qcom: ipq5018: Add GE PHY to internal
 mdio bus

From: George Moussalem <george.moussalem@...look.com>

The IPQ5018 SoC contains an internal GE PHY, always at phy address 7.
As such, let's add the GE PHY node to the SoC dtsi.

The LDO controller found in the SoC must be enabled to provide constant
low voltages to the PHY. The mdio-ipq4019 driver already has support
for this, so adding the appropriate TCSR register offset.

In addition, the GE PHY outputs both the RX and TX clocks to the GCC
which gate controls them and routes them back to the PHY itself.
So let's create two DT fixed clocks and register them in the GCC node.

Signed-off-by: George Moussalem <george.moussalem@...look.com>
---
 arch/arm64/boot/dts/qcom/ipq5018.dtsi | 29 ++++++++++++++++++++++++++---
 1 file changed, 26 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/ipq5018.dtsi b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
index 03ebc3e305b267c98a034c41ce47a39269afce75..6c42ed826c3c60960b08afb0b324cfb89f02329d 100644
--- a/arch/arm64/boot/dts/qcom/ipq5018.dtsi
+++ b/arch/arm64/boot/dts/qcom/ipq5018.dtsi
@@ -16,6 +16,18 @@ / {
 	#size-cells = <2>;

 	clocks {
+		gephy_rx_clk: gephy-rx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
+		gephy_tx_clk: gephy-tx-clk {
+			compatible = "fixed-clock";
+			clock-frequency = <125000000>;
+			#clock-cells = <0>;
+		};
+
 		sleep_clk: sleep-clk {
 			compatible = "fixed-clock";
 			#clock-cells = <0>;
@@ -184,7 +196,8 @@ pcie0_phy: phy@...00 {

 		mdio0: mdio@...00 {
 			compatible = "qcom,ipq5018-mdio";
-			reg = <0x00088000 0x64>;
+			reg = <0x00088000 0x64>,
+			      <0x019475c4 0x4>;
 			#address-cells = <1>;
 			#size-cells = <0>;

@@ -192,6 +205,16 @@ mdio0: mdio@...00 {
 			clock-names = "gcc_mdio_ahb_clk";

 			status = "disabled";
+
+			ge_phy: ethernet-phy@7 {
+				compatible = "ethernet-phy-id004d.d0c0";
+				reg = <7>;
+
+				clocks = <&gcc GCC_GEPHY_RX_CLK>,
+					 <&gcc GCC_GEPHY_TX_CLK>;
+
+				resets = <&gcc GCC_GEPHY_MISC_ARES>;
+			};
 		};

 		mdio1: mdio@...00 {
@@ -232,8 +255,8 @@ gcc: clock-controller@...0000 {
 				 <&pcie0_phy>,
 				 <&pcie1_phy>,
 				 <0>,
-				 <0>,
-				 <0>,
+				 <&gephy_rx_clk>,
+				 <&gephy_tx_clk>,
 				 <0>,
 				 <0>;
 			#clock-cells = <1>;

-- 
2.49.0