Message-Id: <20250528144650.48343-1-matthew.gerlach@altera.com>
Date: Wed, 28 May 2025 07:46:50 -0700
From: Matthew Gerlach <matthew.gerlach@...era.com>
To: andrew+netdev@...n.ch,
	davem@...emloft.net,
	edumazet@...gle.com,
	kuba@...nel.org,
	pabeni@...hat.com,
	robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	maxime.chevallier@...tlin.com,
	richardcochran@...il.com,
	netdev@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Mun Yew Tham <mun.yew.tham@...era.com>,
	Matthew Gerlach <matthew.gerlach@...era.com>
Subject: [PATCH v2] dt-bindings: net: Convert socfpga-dwmac bindings to yaml

From: Mun Yew Tham <mun.yew.tham@...era.com>

Convert the bindings for socfpga-dwmac to yaml.

Signed-off-by: Mun Yew Tham <mun.yew.tham@...era.com>
Signed-off-by: Matthew Gerlach <matthew.gerlach@...era.com>
---
v2:
 - Add compatible to required.
 - Add descriptions for clocks.
 - Add clock-names.
 - Clean up items: in altr,sysmgr-syscon.
 - Change "additionalProperties: true" to "unevaluatedProperties: false".
 - Add properties needed for "unevaluatedProperties: false".
 - Fix indentation in examples.
 - Drop gmac0: label in examples.
 - Exclude support for Arria10 that is not validating.
---
 .../bindings/net/socfpga,dwmac.yaml           | 148 ++++++++++++++++++
 .../devicetree/bindings/net/socfpga-dwmac.txt |  57 -------
 2 files changed, 148 insertions(+), 57 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/socfpga,dwmac.yaml
 delete mode 100644 Documentation/devicetree/bindings/net/socfpga-dwmac.txt

diff --git a/Documentation/devicetree/bindings/net/socfpga,dwmac.yaml b/Documentation/devicetree/bindings/net/socfpga,dwmac.yaml
new file mode 100644
index 000000000000..a02175838fba
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/socfpga,dwmac.yaml
@@ -0,0 +1,148 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/socfpga,dwmac.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Altera SOCFPGA SoC DWMAC controller
+
+maintainers:
+  - Matthew Gerlach <matthew.gerlach@...era.com>
+
+description:
+  This binding describes the Altera SOCFPGA SoC implementation of the
+  Synopsys DWMAC for the Cyclone5, Arria5, Stratix10, and Agilex7 families
+  of chips.
+  # TODO: Determine how to handle the Arria10 reset-name, stmmaceth-ocp, that
+  # does not validate against net/snps,dwmac.yaml.
+
+select:
+  properties:
+    compatible:
+      oneOf:
+        - items:
+            - const: altr,socfpga-stmmac
+            - const: snps,dwmac-3.70a
+            - const: snps,dwmac
+        - items:
+            - const: altr,socfpga-stmmac-a10-s10
+            - const: snps,dwmac-3.74a
+            - const: snps,dwmac
+
+  required:
+    - compatible
+    - altr,sysmgr-syscon
+
+properties:
+  clocks:
+    minItems: 1
+    items:
+      - description: GMAC main clock
+      - description:
+          PTP reference clock. This clock is used for programming the
+          Timestamp Addend Register. If not passed then the system
+          clock will be used and this is fine on some platforms.
+
+  clock-names:
+    minItems: 1
+    maxItems: 2
+    contains:
+      enum:
+        - stmmaceth
+        - ptp_ref
+
+  iommus:
+    maxItems: 1
+
+  phy-mode:
+    enum:
+      - rgmii
+      - sgmii
+      - gmii
+
+  rxc-skew-ps:
+    description: Skew control of RXC pad
+
+  rxd0-skew-ps:
+    description: Skew control of RX data 0 pad
+
+  rxd1-skew-ps:
+    description: Skew control of RX data 1 pad
+
+  rxd2-skew-ps:
+    description: Skew control of RX data 2 pad
+
+  rxd3-skew-ps:
+    description: Skew control of RX data 3 pad
+
+  rxdv-skew-ps:
+    description: Skew control of RX CTL pad
+
+  txc-skew-ps:
+    description: Skew control of TXC pad
+
+  txen-skew-ps:
+    description: Skew control of TXC pad
+
+  altr,emac-splitter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be the phandle to the emac splitter soft IP node if DWMAC
+      controller is connected an emac splitter.
+
+  altr,f2h_ptp_ref_clk:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Phandle to Precision Time Protocol reference clock. This clock is
+      common to gmac instances and defaults to osc1.
+
+  altr,gmii-to-sgmii-converter:
+    $ref: /schemas/types.yaml#/definitions/phandle
+    description:
+      Should be the phandle to the gmii to sgmii converter soft IP.
+
+  altr,sysmgr-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    description:
+      Should be the phandle to the system manager node that encompass
+      the glue register, the register offset, and the register shift.
+      On Cyclone5/Arria5, the register shift represents the PHY mode
+      bits, while on the Arria10/Stratix10/Agilex platforms, the
+      register shift represents bit for each emac to enable/disable
+      signals from the FPGA fabric to the EMAC modules.
+    items:
+      - items:
+          - description: phandle to the system manager node
+          - description: offset of the control register
+          - description: shift within the control register
+
+patternProperties:
+  "^mdio[0-9]$":
+    type: object
+
+allOf:
+  - $ref: snps,dwmac.yaml#
+
+unevaluatedProperties: false
+
+examples:
+
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    soc {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ethernet@...00000 {
+            compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a",
+            "snps,dwmac";
+            altr,sysmgr-syscon = <&sysmgr 0x60 0>;
+            reg = <0xff700000 0x2000>;
+            interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
+            interrupt-names = "macirq";
+            mac-address = [00 00 00 00 00 00]; /* Filled in by U-Boot */
+            clocks = <&emac_0_clk>;
+            clock-names = "stmmaceth";
+            phy-mode = "sgmii";
+        };
+    };
diff --git a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt b/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
deleted file mode 100644
index 612a8e8abc88..000000000000
--- a/Documentation/devicetree/bindings/net/socfpga-dwmac.txt
+++ /dev/null
@@ -1,57 +0,0 @@
-Altera SOCFPGA SoC DWMAC controller
-
-This is a variant of the dwmac/stmmac driver an inherits all descriptions
-present in Documentation/devicetree/bindings/net/stmmac.txt.
-
-The device node has additional properties:
-
-Required properties:
- - compatible	: For Cyclone5/Arria5 SoCs it should contain
-		  "altr,socfpga-stmmac". For Arria10/Agilex/Stratix10 SoCs
-		  "altr,socfpga-stmmac-a10-s10".
-		  Along with "snps,dwmac" and any applicable more detailed
-		  designware version numbers documented in stmmac.txt
- - altr,sysmgr-syscon : Should be the phandle to the system manager node that
-   encompasses the glue register, the register offset, and the register shift.
-   On Cyclone5/Arria5, the register shift represents the PHY mode bits, while
-   on the Arria10/Stratix10/Agilex platforms, the register shift represents
-   bit for each emac to enable/disable signals from the FPGA fabric to the
-   EMAC modules.
- - altr,f2h_ptp_ref_clk use f2h_ptp_ref_clk instead of default eosc1 clock
-   for ptp ref clk. This affects all emacs as the clock is common.
-
-Optional properties:
-altr,emac-splitter: Should be the phandle to the emac splitter soft IP node if
-		DWMAC controller is connected emac splitter.
-phy-mode: The phy mode the ethernet operates in
-altr,sgmii-to-sgmii-converter: phandle to the TSE SGMII converter
-
-This device node has additional phandle dependency, the sgmii converter:
-
-Required properties:
- - compatible	: Should be altr,gmii-to-sgmii-2.0
- - reg-names	: Should be "eth_tse_control_port"
-
-Example:
-
-gmii_to_sgmii_converter: phy@...000240 {
-	compatible = "altr,gmii-to-sgmii-2.0";
-	reg = <0x00000001 0x00000240 0x00000008>,
-		<0x00000001 0x00000200 0x00000040>;
-	reg-names = "eth_tse_control_port";
-	clocks = <&sgmii_1_clk_0 &emac1 1 &sgmii_clk_125 &sgmii_clk_125>;
-	clock-names = "tse_pcs_ref_clk_clock_connection", "tse_rx_cdr_refclk";
-};
-
-gmac0: ethernet@...00000 {
-	compatible = "altr,socfpga-stmmac", "snps,dwmac-3.70a", "snps,dwmac";
-	altr,sysmgr-syscon = <&sysmgr 0x60 0>;
-	reg = <0xff700000 0x2000>;
-	interrupts = <0 115 4>;
-	interrupt-names = "macirq";
-	mac-address = [00 00 00 00 00 00];/* Filled in by U-Boot */
-	clocks = <&emac_0_clk>;
-	clock-names = "stmmaceth";
-	phy-mode = "sgmii";
-	altr,gmii-to-sgmii-converter = <&gmii_to_sgmii_converter>;
-};
-- 
2.35.3

Powered by blists - more mailing lists