linux-kernel - Re: [PATCH v2 2/4] ARM: dts: imx28: add pwm7 muxing options

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aDcl90Bz9BJnddL5@lizhi-Precision-Tower-5810>
Date: Wed, 28 May 2025 11:04:23 -0400
From: Frank Li <Frank.li@....com>
To: Dario Binacchi <dario.binacchi@...rulasolutions.com>
Cc: linux-kernel@...r.kernel.org, michael@...rulasolutions.com,
	linux-amarula@...rulasolutions.com,
	Conor Dooley <conor+dt@...nel.org>,
	Fabio Estevam <festevam@...il.com>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Pengutronix Kernel Team <kernel@...gutronix.de>,
	Rob Herring <robh@...nel.org>,
	Sascha Hauer <s.hauer@...gutronix.de>,
	Shawn Guo <shawnguo@...nel.org>, devicetree@...r.kernel.org,
	imx@...ts.linux.dev, linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v2 2/4] ARM: dts: imx28: add pwm7 muxing options

On Wed, May 28, 2025 at 02:11:39PM +0200, Dario Binacchi wrote:

Need commit message here, you can copy subject to here.

Frank

> Signed-off-by: Dario Binacchi <dario.binacchi@...rulasolutions.com>
> ---
>
> (no changes since v1)
>
>  arch/arm/boot/dts/nxp/mxs/imx28.dtsi | 10 ++++++++++
>  1 file changed, 10 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> index bbea8b77386f..ece46d0e7c7f 100644
> --- a/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> +++ b/arch/arm/boot/dts/nxp/mxs/imx28.dtsi
> @@ -755,6 +755,16 @@ MX28_PAD_PWM4__PWM_4
>  					fsl,pull-up = <MXS_PULL_DISABLE>;
>  				};
>
> +				pwm7_pins_a: pwm7@0 {
> +					reg = <0>;
> +					fsl,pinmux-ids = <
> +						MX28_PAD_SAIF1_SDATA0__PWM_7
> +					>;
> +					fsl,drive-strength = <MXS_DRIVE_4mA>;
> +					fsl,voltage = <MXS_VOLTAGE_HIGH>;
> +					fsl,pull-up = <MXS_PULL_DISABLE>;
> +				};
> +
>  				lcdif_24bit_pins_a: lcdif-24bit@0 {
>  					reg = <0>;
>  					fsl,pinmux-ids = <
> --
> 2.43.0
>