linux-kernel - Re: [PATCH v7 6/6] iio: adc: ad7606: add gain calibration support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <a6693794-1c21-41df-80e7-69c4242f394f@baylibre.com>
Date: Fri, 30 May 2025 12:19:53 -0500
From: David Lechner <dlechner@...libre.com>
To: Angelo Dureghello <adureghello@...libre.com>,
 Jonathan Cameron <jic23@...nel.org>, Nuno Sá
 <nuno.sa@...log.com>, Andy Shevchenko <andy@...nel.org>,
 Lars-Peter Clausen <lars@...afoo.de>,
 Michael Hennerich <Michael.Hennerich@...log.com>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org,
 devicetree@...r.kernel.org
Subject: Re: [PATCH v7 6/6] iio: adc: ad7606: add gain calibration support

On 5/26/25 5:03 AM, Angelo Dureghello wrote:
> From: Angelo Dureghello <adureghello@...libre.com>
> 
> Add gain calibration support, using resistor values set on devicetree,
> values to be set accordingly with ADC external RFilter, as explained in
> the ad7606c-16 datasheet, rev0, page 37.
> 
> Usage example in the fdt yaml documentation.
> 
> Tested-by: David Lechner <dlechner@...libre.com>
> Reviewed-by: Nuno Sá <nuno.sa@...log.com>
> Signed-off-by: Angelo Dureghello <adureghello@...libre.com>
> ---

...

> +static int ad7606_chan_calib_gain_setup(struct iio_dev *indio_dev)
> +{
> +	struct ad7606_state *st = iio_priv(indio_dev);
> +	unsigned int num_channels = st->chip_info->num_adc_channels;
> +	struct device *dev = st->dev;
> +	int ret;
> +
> +	device_for_each_child_node_scoped(dev, child) {
> +		u32 reg, r_gain;
> +
> +		ret = fwnode_property_read_u32(child, "reg", &reg);
> +		if (ret)
> +			return ret;
> +
> +		/* Chan reg is a 1-based index. */
> +		if (reg < 1 || reg > num_channels)
> +			return ret;

Shouldn't this return -EINVAL? Otherwise, it will return success for an
out of range reg number and skip any addition child nodes.

> +
> +		r_gain = 0;
> +		ret = fwnode_property_read_u32(child, "adi,rfilter-ohms",
> +					       &r_gain);
> +		if (r_gain > AD7606_CALIB_GAIN_MAX)
> +			return -EINVAL;
> +
> +		ret = st->bops->reg_write(st, AD7606_CALIB_GAIN(reg - 1),
> +			DIV_ROUND_CLOSEST(r_gain, AD7606_CALIB_GAIN_STEP));
> +		if (ret)
> +			return ret;
> +	}
> +
> +	return 0;
> +}
> +