| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <a58abc2a-6583-d4be-aea2-b2178b2acf60@linux.intel.com>
Date: Mon, 2 Jun 2025 19:18:18 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: Claudiu <claudiu.beznea@...on.dev>
cc: bhelgaas@...gle.com, lpieralisi@...nel.org, kw@...ux.com,
manivannan.sadhasivam@...aro.org, robh@...nel.org, krzk+dt@...nel.org,
conor+dt@...nel.org, geert+renesas@...der.be, magnus.damm@...il.com,
mturquette@...libre.com, sboyd@...nel.org, p.zabel@...gutronix.de,
linux-pci@...r.kernel.org, linux-renesas-soc@...r.kernel.org,
devicetree@...r.kernel.org, LKML <linux-kernel@...r.kernel.org>,
linux-arm-kernel@...ts.infradead.org, linux-clk@...r.kernel.org,
john.madieu.xa@...renesas.com,
Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
Subject: Re: [PATCH v2 4/8] PCI: rzg3s-host: Add Initial PCIe Host Driver
for Renesas RZ/G3S SoC
On Fri, 30 May 2025, Claudiu wrote:
> From: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
>
> The Renesas RZ/G3S features a PCIe IP that complies with the PCI Express
> Base Specification 4.0 and supports speeds of up to 5 GT/s. It functions
> only as a root complex, with a single-lane (x1) configuration. The
> controller includes Type 1 configuration registers, as well as IP
> specific registers (called AXI registers) required for various adjustments.
>
> Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> ---
>
> Changes in v2:
> - dropped the references to other RZ SoCs from patch description
> - dropped the dot at the end of single line comments that are not a
> sentence
> - as a result of v2 rework removed unused macros and definitions
> (e.g. RZG3S_PCI_REQISS_TR_TP1_RD, RZG3S_PCI_REQISS_TR_TP1_WR,
> enum rzg3s_pcie_cfg_access_type)
> - dropped driver specific defines that are for generic PCI
> register offsets and used the generic ones
> - updated the value of RZG3S_PCI_MSI_INT_NR as on RZ/G3S there
> are no more than 32 MSIs (v1 value was due to mistake in the
> HW manual)
> - added timeout macros to be used by read_poll_timeout() specific
> functions
> - re-worked the reset handling part by using reset subsystem specific
> functions only; with this the struct rzg3s_pcie_soc_data was
> added; reference to PHY initialization function was added to this
> structure as well
> - dropped devres_group_id as the issue it tried to address will
> now be fixed in platform bus code (v2 posted [2])
> - use 80 columns alignment
> - updated function name in the idea of using names similar to
> what is used in other drivers
> - added rzg3s_pcie_root_ops and rzg3s_pcie_child_ops and populate
> bridge->ops, bridge->child_ops with it; from probe:
> + bridge->ops = &rzg3s_pcie_root_ops;
> + bridge->child_ops = &rzg3s_pcie_child_ops;
> - print a warning for 32 bit accesses (based on the value of
> bus->unsafe_warn as done in the common code)
> - dropped dev_dbg() in read/write functions
> - added HW manual revision identifier in comments that points to the
> statements from manual
> - reworked the rzg3s_pcie_intx_setup() as the legacy interrupt DT
> node is not used anymore
> - in rzg3s_pcie_config_init() do not hardcode anymore the
> primary bus, secondary bus, subordinate bus but get this information
> from device tree and update HW registers accordingly
> - dropped rzg3s_pcie_remove() and added rzg3s_pcie_host_remove_action()
> to be used as a devm action or reset function
> - s/rzg3s_pcie_suspend/rzg3s_pcie_suspend_noirq,
> s/rzg3s_pcie_resume/rzg3s_pcie_resume_noirq
> - dropped DEFINE_NOIRQ_DEV_PM_OPS()
> - updated driver name (rzg3s-pcie-host) to reflect it is for RZ/G3S
>
> [2] https://lore.kernel.org/all/20250526122054.65532-2-claudiu.beznea.uj@bp.renesas.com
>
> MAINTAINERS | 8 +
> drivers/pci/controller/Kconfig | 7 +
> drivers/pci/controller/Makefile | 1 +
> drivers/pci/controller/pcie-rzg3s-host.c | 1686 ++++++++++++++++++++++
> 4 files changed, 1702 insertions(+)
> create mode 100644 drivers/pci/controller/pcie-rzg3s-host.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 0d59a5910e63..3076065955f0 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -19286,6 +19286,14 @@ S: Maintained
> F: drivers/pci/controller/dwc/pcie-qcom-common.c
> F: drivers/pci/controller/dwc/pcie-qcom.c
>
> +PCIE DRIVER FOR RENESAS RZ/G3S SERIES
> +M: Claudiu Beznea <claudiu.beznea.uj@...renesas.com>
> +L: linux-pci@...r.kernel.org
> +L: linux-renesas-soc@...r.kernel.org
> +S: Supported
> +F: Documentation/devicetree/bindings/pci/renesas,r9a08g045s33-pcie.yaml
> +F: drivers/pci/controller/pcie-rzg3s-host.c
> +
> PCIE DRIVER FOR ROCKCHIP
> M: Shawn Lin <shawn.lin@...k-chips.com>
> L: linux-pci@...r.kernel.org
> diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
> index 886f6f43a895..76fa5f330105 100644
> --- a/drivers/pci/controller/Kconfig
> +++ b/drivers/pci/controller/Kconfig
> @@ -258,6 +258,13 @@ config PCI_RCAR_GEN2
> There are 3 internal PCI controllers available with a single
> built-in EHCI/OHCI host controller present on each one.
>
> +config PCIE_RENESAS_RZG3S_HOST
> + tristate "Renesas RZ/G3S PCIe host controller"
> + depends on ARCH_RENESAS || COMPILE_TEST
> + select MFD_SYSCON
> + help
> + Say Y here if you want PCIe host controller support on Renesas RZ/G3S SoC.
> +
> config PCIE_ROCKCHIP
> bool
> depends on PCI
> diff --git a/drivers/pci/controller/Makefile b/drivers/pci/controller/Makefile
> index 038ccbd9e3ba..229929a945c2 100644
> --- a/drivers/pci/controller/Makefile
> +++ b/drivers/pci/controller/Makefile
> @@ -10,6 +10,7 @@ obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
> obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
> obj-$(CONFIG_PCIE_RCAR_HOST) += pcie-rcar.o pcie-rcar-host.o
> obj-$(CONFIG_PCIE_RCAR_EP) += pcie-rcar.o pcie-rcar-ep.o
> +obj-$(CONFIG_PCIE_RENESAS_RZG3S_HOST) += pcie-rzg3s-host.o
> obj-$(CONFIG_PCI_HOST_COMMON) += pci-host-common.o
> obj-$(CONFIG_PCI_HOST_GENERIC) += pci-host-generic.o
> obj-$(CONFIG_PCI_HOST_THUNDER_ECAM) += pci-thunder-ecam.o
> diff --git a/drivers/pci/controller/pcie-rzg3s-host.c b/drivers/pci/controller/pcie-rzg3s-host.c
> new file mode 100644
> index 000000000000..7649674bf72d
> --- /dev/null
> +++ b/drivers/pci/controller/pcie-rzg3s-host.c
> @@ -0,0 +1,1686 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * PCIe driver for Renesas RZ/G3S SoCs
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + *
> + * Based on:
> + * drivers/pci/controller/pcie-rcar-host.c
> + * Copyright (C) 2009 - 2011 Paul Mundt
> + */
> +
> +#include <linux/bitmap.h>
> +#include <linux/bitops.h>
> +#include <linux/cleanup.h>
> +#include <linux/delay.h>
> +#include <linux/iopoll.h>
> +#include <linux/interrupt.h>
> +#include <linux/irq.h>
> +#include <linux/irqchip/chained_irq.h>
> +#include <linux/irqdomain.h>
> +#include <linux/kernel.h>
> +#include <linux/mfd/syscon.h>
> +#include <linux/msi.h>
> +#include <linux/of_irq.h>
> +#include <linux/pci.h>
> +#include <linux/platform_device.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/regmap.h>
Do you need to select something REGMAP related in Kconfig?
> +#include <linux/reset.h>
> +#include <linux/slab.h>
> +
> +/* AXI registers */
> +#define RZG3S_PCI_REQDATA(id) (0x80 + (id) * 0x4)
> +#define RZG3S_PCI_REQRCVDAT 0x8c
> +#define RZG3S_PCI_REQADR1 0x90
> +#define RZG3S_PCI_REQADR1_BUS GENMASK(31, 24)
> +#define RZG3S_PCI_REQADR1_DEV GENMASK(23, 19)
> +#define RZG3S_PCI_REQADR1_FUNC GENMASK(18, 16)
> +#define RZG3S_PCI_REQADR1_REG GENMASK(11, 0)
Consider adding new lines into this long list of defines. E.g., when there
are reg + it's fields which naturally form a group that could have empty
lines around it.
> +#define RZG3S_PCI_REQBE 0x98
> +#define RZG3S_PCI_REQBE_BYTE_EN GENMASK(3, 0)
> +#define RZG3S_PCI_REQISS 0x9c
> +#define RZG3S_PCI_REQISS_REQ_ISSUE BIT(0)
> +#define RZG3S_PCI_REQISS_TR_TYPE GENMASK(11, 8)
> +#define RZG3S_PCI_REQISS_TR_TP0_RD FIELD_PREP(RZG3S_PCI_REQISS_TR_TYPE, 0x4)
> +#define RZG3S_PCI_REQISS_TR_TP0_WR FIELD_PREP(RZG3S_PCI_REQISS_TR_TYPE, 0x5)
> +#define RZG3S_PCI_REQISS_MOR_STATUS GENMASK(18, 16)
> +#define RZG3S_PCI_MSIRCVWADRL 0x100
> +#define RZG3S_PCI_MSIRCVWADRL_ENA BIT(0)
> +#define RZG3S_PCI_MSIRCVWADRL_MSG_DATA_ENA BIT(1)
> +#define RZG3S_PCI_MSIRCVWADRU 0x104
> +#define RZG3S_PCI_MSIRCVWMSKL 0x108
> +#define RZG3S_PCI_MSIRCVWMSKU 0x10c
> +#define RZG3S_PCI_PINTRCVIE 0x110
> +#define RZG3S_PCI_PINTRCVIE_INTX(i) BIT(i)
> +#define RZG3S_PCI_PINTRCVIE_MSI BIT(4)
> +#define RZG3S_PCI_PINTRCVIS 0x114
> +#define RZG3S_PCI_PINTRCVIS_INTX(i) BIT(i)
> +#define RZG3S_PCI_PINTRCVIS_MSI BIT(4)
> +#define RZG3S_PCI_MSGRCVIE 0x120
> +#define RZG3S_PCI_MSGRCVIE_MSG_RCV BIT(24)
> +#define RZG3S_PCI_MSGRCVIS 0x124
> +#define RZG3S_PCI_MSGRCVIS_MRI BIT(24)
> +#define RZG3S_PCI_PEIE0 0x200
> +#define RZG3S_PCI_PEIS0 0x204
> +#define RZG3S_PCI_PEIS0_DL_UPDOWN BIT(9)
> +#define RZG3S_PCI_PEIS0_RX_DLLP_PM_ENTER BIT(12)
> +#define RZG3S_PCI_PEIE1 0x208
> +#define RZG3S_PCI_PEIS1 0x20c
> +#define RZG3S_PCI_AMEIE 0x210
> +#define RZG3S_PCI_AMEIS 0x214
> +#define RZG3S_PCI_ASEIE1 0x220
> +#define RZG3S_PCI_ASEIS1 0x224
> +#define RZG3S_PCI_PCSTAT1 0x408
> +#define RZG3S_PCI_PCSTAT1_DL_DOWN_STS BIT(0)
> +#define RZG3S_PCI_PCSTAT1_LTSSM_STATE GENMASK(14, 10)
> +#define RZG3S_PCI_PCCTRL2 0x410
> +#define RZG3S_PCI_PCCTRL2_LS_CHG_REQ BIT(0)
> +#define RZG3S_PCI_PCCTRL2_LS_CHG GENMASK(9, 8)
> +#define RZG3S_PCI_PCSTAT2 0x414
> +#define RZG3S_PCI_PCSTAT2_STATE_RX_DETECT GENMASK(15, 8)
> +#define RZG3S_PCI_PCSTAT2_SDRIRE GENMASK(7, 0)
> +#define RZG3S_PCI_PCSTAT2_LS_CHG_DONE BIT(28)
> +#define RZG3S_PCI_PERM 0x300
> +#define RZG3S_PCI_PERM_PIPE_PHY_REG_EN BIT(1)
> +#define RZG3S_PCI_PERM_CFG_HWINIT_EN BIT(2)
> +#define RZG3S_PCI_MSIRE(id) (0x600 + (id) * 0x10)
> +#define RZG3S_PCI_MSIRE_ENA BIT(0)
> +#define RZG3S_PCI_MSIRM(id) (0x608 + (id) * 0x10)
> +#define RZG3S_PCI_MSIRS(id) (0x60c + (id) * 0x10)
> +#define RZG3S_PCI_AWBASEL(id) (0x1000 + (id) * 0x20)
> +#define RZG3S_PCI_AWBASEL_WIN_ENA BIT(0)
> +#define RZG3S_PCI_AWBASEU(id) (0x1004 + (id) * 0x20)
> +#define RZG3S_PCI_AWMASKL(id) (0x1008 + (id) * 0x20)
> +#define RZG3S_PCI_AWMASKU(id) (0x100c + (id) * 0x20)
> +#define RZG3S_PCI_ADESTL(id) (0x1010 + (id) * 0x20)
> +#define RZG3S_PCI_ADESTU(id) (0x1014 + (id) * 0x20)
> +#define RZG3S_PCI_PWBASEL(id) (0x1100 + (id) * 0x20)
> +#define RZG3S_PCI_PWBASEL_ENA BIT(0)
> +#define RZG3S_PCI_PWBASEU(id) (0x1104 + (id) * 0x20)
> +#define RZG3S_PCI_PDESTL(id) (0x1110 + (id) * 0x20)
> +#define RZG3S_PCI_PDESTU(id) (0x1114 + (id) * 0x20)
> +#define RZG3S_PCI_PWMASKL(id) (0x1108 + (id) * 0x20)
> +#define RZG3S_PCI_PWMASKU(id) (0x110c + (id) * 0x20)
>
> +/* PHY control registers */
> +#define RZG3S_PCI_PHY_XCFGD(id) (0x2000 + (id) * 0x10)
> +#define RZG3S_PCI_PHY_XCFGD_NUM 39
> +#define RZG3S_PCI_PHY_XCFGA_CMN(id) (0x2400 + (id) * 0x10)
> +#define RZG3S_PCI_PHY_XCFGA_CMN_NUM 16
> +#define RZG3S_PCI_PHY_XCFGA_RX(id) (0x2500 + (id) * 0x10)
> +#define RZG3S_PCI_PHY_XCFGA_RX_NUM 13
> +#define RZG3S_PCI_PHY_XCFGA_TX 0x25d0
> +#define RZG3S_PCI_PHY_XCFG_CTRL 0x2a20
> +#define RZG3S_PCI_PHY_XCFG_CTRL_PHYREG_SEL BIT(0)
> +
> +/* PCIe registers */
> +#define RZG3S_PCI_CFG_BASE 0x6000
> +#define RZG3S_PCI_CFG_BARMSK00L 0xa0
> +#define RZG3S_PCI_CFG_BARMSK00U 0xa4
> +#define RZG3S_PCI_CFG_LINKCS 0x70
> +#define RZG3S_PCI_CFG_LINKCS_CUR_LS GENMASK(19, 16)
> +#define RZG3S_PCI_CFG_LINCS2 0x90
> +#define RZG3S_PCI_CFG_LINCS2_TARGET_LS GENMASK(3, 0)
Are these duplicating offsets / fields in the PCI Express Capability?
If yes, you should use include/uapi/linux/pci_regs.h defines and not add
duplicates.
> +
> +/* System controller registers */
> +#define RZG3S_SYS_PCIE_RST_RSM_B 0xd74
> +#define RZG3S_SYS_PCIE_RST_RSM_B_MASK BIT(0)
> +
> +/* Maximum number of windows */
> +#define RZG3S_MAX_WINDOWS 8
> +
> +/* Number of MSI interrupts per register */
> +#define RZG3S_PCI_MSI_INT_PER_REG 32
> +/* The number of MSI interrupts */
> +#define RZG3S_PCI_MSI_INT_NR RZG3S_PCI_MSI_INT_PER_REG
> +
> +/* Timeouts */
> +#define RZG3S_REQ_ISSUE_TIMEOUT_US 2500
> +#define RZG3S_LTSSM_STATE_TIMEOUT_US 1000
> +#define RZG3S_LS_CHANGE_TIMEOUT_US 1000
> +#define RZG3S_LINK_UP_TIMEOUT_US 500000
> +
> +/**
> + * enum rzg3s_pcie_link_speed - RZ/G3S PCIe available link speeds
> + * @RZG3S_PCIE_LINK_SPEED_2_5_GTS: 2.5 GT/s
> + * @RZG3S_PCIE_LINK_SPEED_5_0_GTS: 5.0 GT/s
> + */
> +enum rzg3s_pcie_link_speed {
> + RZG3S_PCIE_LINK_SPEED_2_5_GTS = 1,
> + RZG3S_PCIE_LINK_SPEED_5_0_GTS
> +};
Use include/uapi/linux/pci_regs.h defines instead?
> +
> +/**
> + * struct rzg3s_pcie_msi - RZ/G3S PCIe MSI data structure
> + * @domain: IRQ domain
> + * @map: bitmap with the allocated MSIs
> + * @dma_addr: address of the allocated MSI window
> + * @window_base: base address of the MSI window
> + * @pages: allocated pages for MSI window mapping
> + * @map_lock: lock for bitmap with the allocated MSIs
> + */
> +struct rzg3s_pcie_msi {
> + struct irq_domain *domain;
> + DECLARE_BITMAP(map, RZG3S_PCI_MSI_INT_NR);
> + dma_addr_t dma_addr;
> + dma_addr_t window_base;
> + unsigned long pages;
> + struct mutex map_lock;
> +};
> +
> +struct rzg3s_pcie_host;
> +
> +/**
> + * struct rzg3s_pcie_soc_data - SoC specific data
> + * @init_phy: PHY initialization function
> + * @power_resets: array with the resets that need to be de-asserted after
> + * power-on
> + * @cfg_resets: array with the resets that need to be de-asserted after
> + * configuration
> + * @num_power_resets: number of power resets
> + * @num_cfg_resets: number of configuration resets
> + */
> +struct rzg3s_pcie_soc_data {
> + int (*init_phy)(struct rzg3s_pcie_host *host);
> + const char * const *power_resets;
> + const char * const *cfg_resets;
> + u8 num_power_resets;
> + u8 num_cfg_resets;
> +};
> +
> +/**
> + * struct rzg3s_pcie_host - RZ/G3S PCIe data structure
> + * @axi: base address for AXI registers
> + * @pcie: base address for PCIe registers
> + * @dev: struct device
> + * @power_resets: reset control signals that should be set after power up
> + * @cfg_resets: reset control signals that should be set after configuration
> + * @sysc: SYSC regmap
> + * @intx_domain: INTx IRQ domain
> + * @data: SoC specific data
> + * @msi: MSI data structure
> + * @hw_lock: lock for access to the HW resources
> + * @intx_irqs: INTx interrupts
> + * @vendor_id: Vendor ID
> + * @device_id: Device ID
> + */
> +struct rzg3s_pcie_host {
> + void __iomem *axi;
> + void __iomem *pcie;
> + struct device *dev;
> + struct reset_control_bulk_data *power_resets;
> + struct reset_control_bulk_data *cfg_resets;
> + struct regmap *sysc;
> + struct irq_domain *intx_domain;
> + const struct rzg3s_pcie_soc_data *data;
> + struct rzg3s_pcie_msi msi;
> + raw_spinlock_t hw_lock;
> + int intx_irqs[PCI_NUM_INTX];
> + u32 vendor_id;
> + u32 device_id;
> +};
> +
> +#define rzg3s_msi_to_host(_msi) container_of(_msi, struct rzg3s_pcie_host, msi)
> +
> +static void rzg3s_pcie_update_bits(void __iomem *base, u32 offset, u32 mask,
> + u32 val)
> +{
> + u32 tmp;
> +
> + tmp = readl(base + offset);
> + tmp &= ~mask;
> + tmp |= val & mask;
> + writel(tmp, base + offset);
> +}
> +
> +static bool rzg3s_pcie_child_issue_request(struct rzg3s_pcie_host *host)
> +{
> + u32 val;
> + int ret;
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_REQISS,
> + RZG3S_PCI_REQISS_REQ_ISSUE,
> + RZG3S_PCI_REQISS_REQ_ISSUE);
> + ret = readl_poll_timeout_atomic(host->axi + RZG3S_PCI_REQISS, val,
> + !(val & RZG3S_PCI_REQISS_REQ_ISSUE),
> + 5, RZG3S_REQ_ISSUE_TIMEOUT_US);
> +
> + return !!ret || (val & RZG3S_PCI_REQISS_MOR_STATUS);
> +}
> +
> +static int rzg3s_pcie_child_read_conf(struct rzg3s_pcie_host *host,
> + struct pci_bus *bus,
> + unsigned int devfn, int where,
> + u32 *data)
> +{
> + int ret;
> +
> + bus->ops->map_bus(bus, devfn, where);
> +
> + /* Set the type of request */
> + writel(RZG3S_PCI_REQISS_TR_TP0_RD, host->axi + RZG3S_PCI_REQISS);
> +
> + /* Issue the request and wait to finish */
> + ret = rzg3s_pcie_child_issue_request(host);
> + if (ret)
> + return PCIBIOS_SET_FAILED;
> +
> + /* Read the data */
> + *data = readl(host->axi + RZG3S_PCI_REQRCVDAT);
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* Serialization is provided by 'pci_lock' in drivers/pci/access.c */
> +static int rzg3s_pcie_child_read(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 *val)
> +{
> + struct rzg3s_pcie_host *host = bus->sysdata;
> + int ret;
> +
> + ret = rzg3s_pcie_child_read_conf(host, bus, devfn, where, val);
> + if (ret != PCIBIOS_SUCCESSFUL)
> + return ret;
> +
> + if (size <= 2)
> + *val = (*val >> (8 * (where & 3))) & ((1 << (size * 8)) - 1);
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static int rzg3s_pcie_child_write_conf(struct rzg3s_pcie_host *host,
> + struct pci_bus *bus,
> + unsigned int devfn, int where,
> + u32 data)
> +{
> + int ret;
> +
> + bus->ops->map_bus(bus, devfn, where);
> +
> + /* Set the write data */
> + writel(0, host->axi + RZG3S_PCI_REQDATA(0));
> + writel(0, host->axi + RZG3S_PCI_REQDATA(1));
> + writel(data, host->axi + RZG3S_PCI_REQDATA(2));
> +
> + /* Set the type of request */
> + writel(RZG3S_PCI_REQISS_TR_TP0_WR, host->axi + RZG3S_PCI_REQISS);
> +
> + /* Issue the request and wait to finish */
> + ret = rzg3s_pcie_child_issue_request(host);
> + if (ret)
> + return PCIBIOS_SET_FAILED;
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +/* Serialization is provided by 'pci_lock' in drivers/pci/access.c */
> +static int rzg3s_pcie_child_write(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 val)
> +{
> + struct rzg3s_pcie_host *host = bus->sysdata;
> + u32 data, shift;
> + int ret;
> +
> + /*
> + * Controller does 32 bit accesses. To do byte accesses software need
> + * to do read/modify/write. This may have potential side effects. For
> + * example, software may perform a 16-bit write. If the hardware only
> + * supports 32-bit accesses, we must do a 32-bit read, merge in the 16
> + * bits we intend to write, followed by a 32-bit write. If the 16 bits
> + * we *don't* intend to write happen to have any RW1C
> + * (write-one-to-clear) bits set, we just inadvertently cleared
> + * something we shouldn't have.
> + */
> + if (!bus->unsafe_warn) {
> + dev_warn(&bus->dev, "%d-byte config write to %04x:%02x:%02x.%d offset %#x may corrupt adjacent RW1C bits\n",
> + size, pci_domain_nr(bus), bus->number,
> + PCI_SLOT(devfn), PCI_FUNC(devfn), where);
> + bus->unsafe_warn = 1;
> + }
> +
> + ret = rzg3s_pcie_child_read_conf(host, bus, devfn, where, &data);
> + if (ret != PCIBIOS_SUCCESSFUL)
> + return ret;
> +
> + if (size == 1) {
> + shift = BITS_PER_BYTE * (where & 3);
> + data &= ~(0xff << shift);
> + data |= ((val & 0xff) << shift);
> + } else if (size == 2) {
> + shift = BITS_PER_BYTE * (where & 2);
> + data &= ~(0xffff << shift);
> + data |= ((val & 0xffff) << shift);
> + } else {
> + data = val;
> + }
> +
> + return rzg3s_pcie_child_write_conf(host, bus, devfn, where, data);
> +}
> +
> +static void __iomem *rzg3s_pcie_child_map_bus(struct pci_bus *bus,
> + unsigned int devfn,
> + int where)
> +{
> + struct rzg3s_pcie_host *host = bus->sysdata;
> + unsigned int dev, func, reg;
> +
> + dev = PCI_SLOT(devfn);
> + func = PCI_FUNC(devfn);
> + reg = where & ~0x3;
> +
> + /* Set the destination */
> + writel(FIELD_PREP(RZG3S_PCI_REQADR1_BUS, bus->number) |
> + FIELD_PREP(RZG3S_PCI_REQADR1_DEV, dev) |
> + FIELD_PREP(RZG3S_PCI_REQADR1_FUNC, func) |
> + FIELD_PREP(RZG3S_PCI_REQADR1_REG, reg),
> + host->axi + RZG3S_PCI_REQADR1);
> +
> + /* Set byte enable */
> + writel(RZG3S_PCI_REQBE_BYTE_EN, host->axi + RZG3S_PCI_REQBE);
> +
> + return host->axi + where;
> +}
> +
> +static struct pci_ops rzg3s_pcie_child_ops = {
> + .read = rzg3s_pcie_child_read,
> + .write = rzg3s_pcie_child_write,
> + .map_bus = rzg3s_pcie_child_map_bus,
> +};
> +
> +static void __iomem *rzg3s_pcie_root_map_bus(struct pci_bus *bus,
> + unsigned int devfn,
> + int where)
> +{
> + struct rzg3s_pcie_host *host = bus->sysdata;
> +
> + if (devfn)
> + return NULL;
> +
> + return host->pcie + where;
> +}
> +
> +static int rzg3s_pcie_root_write(struct pci_bus *bus, unsigned int devfn,
> + int where, int size, u32 val)
> +{
> + struct rzg3s_pcie_host *host = bus->sysdata;
> +
> + writel(RZG3S_PCI_PERM_CFG_HWINIT_EN, host->axi + RZG3S_PCI_PERM);
> + pci_generic_config_write(bus, devfn, where, size, val);
> + writel(0, host->axi + RZG3S_PCI_PERM);
> +
> + return PCIBIOS_SUCCESSFUL;
> +}
> +
> +static struct pci_ops rzg3s_pcie_root_ops = {
> + .read = pci_generic_config_read,
> + .write = rzg3s_pcie_root_write,
> + .map_bus = rzg3s_pcie_root_map_bus,
> +};
> +
> +static void rzg3s_pcie_intx_irq_handler(struct irq_desc *desc)
> +{
> + struct rzg3s_pcie_host *host = irq_desc_get_handler_data(desc);
> + struct irq_chip *chip = irq_desc_get_chip(desc);
> + unsigned int irq = irq_desc_get_irq(desc);
> + u32 intx = irq - host->intx_irqs[0];
> +
> + chained_irq_enter(chip, desc);
> + generic_handle_domain_irq(host->intx_domain, intx);
> + chained_irq_exit(chip, desc);
> +}
> +
> +static irqreturn_t rzg3s_pcie_msi_irq(int irq, void *data)
> +{
> + u8 regs = RZG3S_PCI_MSI_INT_NR / RZG3S_PCI_MSI_INT_PER_REG;
> + DECLARE_BITMAP(bitmap, RZG3S_PCI_MSI_INT_NR);
> + struct rzg3s_pcie_host *host = data;
> + struct rzg3s_pcie_msi *msi = &host->msi;
> + unsigned long bit;
> + u32 status;
> +
> + status = readl(host->axi + RZG3S_PCI_PINTRCVIS);
> + if (!(status & RZG3S_PCI_PINTRCVIS_MSI))
> + return IRQ_NONE;
> +
> + /* Clear the MSI */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIS,
> + RZG3S_PCI_PINTRCVIS_MSI,
> + RZG3S_PCI_PINTRCVIS_MSI);
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_MSGRCVIS,
> + RZG3S_PCI_MSGRCVIS_MRI, RZG3S_PCI_MSGRCVIS_MRI);
> +
> + for (u8 reg_id = 0; reg_id < regs; reg_id++) {
> + status = readl(host->axi + RZG3S_PCI_MSIRS(reg_id));
> + bitmap_write(bitmap, status, reg_id * RZG3S_PCI_MSI_INT_PER_REG,
> + RZG3S_PCI_MSI_INT_PER_REG);
> + }
> +
> + for_each_set_bit(bit, bitmap, RZG3S_PCI_MSI_INT_NR) {
> + int ret;
> +
> + ret = generic_handle_domain_irq(msi->domain->parent, bit);
> + if (ret) {
> + u8 reg_bit = bit % RZG3S_PCI_MSI_INT_PER_REG;
> + u8 reg_id = bit / RZG3S_PCI_MSI_INT_PER_REG;
> +
> + /* Unknown MSI, just clear it */
> + writel(BIT(reg_bit),
> + host->axi + RZG3S_PCI_MSIRS(reg_id));
> + }
> + }
> +
> + return IRQ_HANDLED;
> +}
> +
> +static void rzg3s_pcie_msi_top_irq_ack(struct irq_data *d)
> +{
> + irq_chip_ack_parent(d);
> +}
> +
> +static void rzg3s_pcie_msi_top_irq_mask(struct irq_data *d)
> +{
> + pci_msi_mask_irq(d);
> + irq_chip_mask_parent(d);
> +}
> +
> +static void rzg3s_pcie_msi_top_irq_unmask(struct irq_data *d)
> +{
> + pci_msi_unmask_irq(d);
> + irq_chip_unmask_parent(d);
> +}
> +
> +static struct irq_chip rzg3s_pcie_msi_top_chip = {
> + .name = "PCIe MSI",
> + .irq_ack = rzg3s_pcie_msi_top_irq_ack,
> + .irq_mask = rzg3s_pcie_msi_top_irq_mask,
> + .irq_unmask = rzg3s_pcie_msi_top_irq_unmask,
> +};
> +
> +static void rzg3s_pcie_msi_irq_ack(struct irq_data *d)
> +{
> + struct rzg3s_pcie_msi *msi = irq_data_get_irq_chip_data(d);
> + struct rzg3s_pcie_host *host = rzg3s_msi_to_host(msi);
> + u8 reg_bit = d->hwirq % RZG3S_PCI_MSI_INT_PER_REG;
> + u8 reg_id = d->hwirq / RZG3S_PCI_MSI_INT_PER_REG;
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + writel(BIT(reg_bit), host->axi + RZG3S_PCI_MSIRS(reg_id));
> +}
> +
> +static void rzg3s_pcie_msi_irq_mask(struct irq_data *d)
> +{
> + struct rzg3s_pcie_msi *msi = irq_data_get_irq_chip_data(d);
> + struct rzg3s_pcie_host *host = rzg3s_msi_to_host(msi);
> + u8 reg_bit = d->hwirq % RZG3S_PCI_MSI_INT_PER_REG;
> + u8 reg_id = d->hwirq / RZG3S_PCI_MSI_INT_PER_REG;
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_MSIRM(reg_id), BIT(reg_bit),
> + BIT(reg_bit));
> +}
> +
> +static void rzg3s_pcie_msi_irq_unmask(struct irq_data *d)
> +{
> + struct rzg3s_pcie_msi *msi = irq_data_get_irq_chip_data(d);
> + struct rzg3s_pcie_host *host = rzg3s_msi_to_host(msi);
> + u8 reg_bit = d->hwirq % RZG3S_PCI_MSI_INT_PER_REG;
> + u8 reg_id = d->hwirq / RZG3S_PCI_MSI_INT_PER_REG;
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_MSIRM(reg_id), BIT(reg_bit),
> + 0);
> +}
> +
> +static void rzg3s_pcie_irq_compose_msi_msg(struct irq_data *data,
> + struct msi_msg *msg)
> +{
> + struct rzg3s_pcie_msi *msi = irq_data_get_irq_chip_data(data);
> + struct rzg3s_pcie_host *host = rzg3s_msi_to_host(msi);
> + u32 drop_mask = RZG3S_PCI_MSIRCVWADRL_ENA |
> + RZG3S_PCI_MSIRCVWADRL_MSG_DATA_ENA;
> + u32 lo, hi;
> +
> + /*
> + * Enable and msg data enable bits are part of the address lo. Drop
> + * them.
> + */
> + lo = readl(host->axi + RZG3S_PCI_MSIRCVWADRL) & ~drop_mask;
> + hi = readl(host->axi + RZG3S_PCI_MSIRCVWADRU);
> +
> + msg->address_lo = lo;
> + msg->address_hi = hi;
> + msg->data = data->hwirq;
> +}
> +
> +static struct irq_chip rzg3s_pcie_msi_bottom_chip = {
> + .name = "rzg3s-pcie-msi",
> + .irq_ack = rzg3s_pcie_msi_irq_ack,
> + .irq_mask = rzg3s_pcie_msi_irq_mask,
> + .irq_unmask = rzg3s_pcie_msi_irq_unmask,
> + .irq_compose_msi_msg = rzg3s_pcie_irq_compose_msi_msg,
> +};
> +
> +static int rzg3s_pcie_msi_domain_alloc(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs,
> + void *args)
> +{
> + struct rzg3s_pcie_msi *msi = domain->host_data;
> + int hwirq;
> +
> + scoped_guard(mutex, &msi->map_lock) {
> + hwirq = bitmap_find_free_region(msi->map, RZG3S_PCI_MSI_INT_NR,
> + order_base_2(nr_irqs));
> + }
> +
> + if (hwirq < 0)
> + return -ENOSPC;
> +
> + for (unsigned int i = 0; i < nr_irqs; i++) {
> + irq_domain_set_info(domain, virq + i, hwirq + i,
> + &rzg3s_pcie_msi_bottom_chip,
> + domain->host_data, handle_edge_irq, NULL,
> + NULL);
> + }
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_msi_domain_free(struct irq_domain *domain,
> + unsigned int virq, unsigned int nr_irqs)
> +{
> + struct irq_data *d = irq_domain_get_irq_data(domain, virq);
> + struct rzg3s_pcie_msi *msi = domain->host_data;
> +
> + guard(mutex)(&msi->map_lock);
> +
> + bitmap_release_region(msi->map, d->hwirq, order_base_2(nr_irqs));
> +}
> +
> +static const struct irq_domain_ops rzg3s_pcie_msi_domain_ops = {
> + .alloc = rzg3s_pcie_msi_domain_alloc,
> + .free = rzg3s_pcie_msi_domain_free,
> +};
> +
> +static struct msi_domain_info rzg3s_pcie_msi_info = {
> + .flags = MSI_FLAG_USE_DEF_DOM_OPS | MSI_FLAG_USE_DEF_CHIP_OPS |
> + MSI_FLAG_MULTI_PCI_MSI | MSI_FLAG_NO_AFFINITY,
> + .chip = &rzg3s_pcie_msi_top_chip,
> +};
> +
> +static int rzg3s_pcie_msi_allocate_domains(struct rzg3s_pcie_msi *msi)
> +{
> + struct rzg3s_pcie_host *host = rzg3s_msi_to_host(msi);
> + struct device *dev = host->dev;
> + struct fwnode_handle *fwnode = dev_fwnode(dev);
> + struct irq_domain *parent;
> +
> + parent = irq_domain_create_linear(fwnode, RZG3S_PCI_MSI_INT_NR,
> + &rzg3s_pcie_msi_domain_ops, msi);
> + if (!parent)
> + return dev_err_probe(dev, -ENOMEM,
> + "failed to create IRQ domain\n");
> + irq_domain_update_bus_token(parent, DOMAIN_BUS_NEXUS);
> +
> + msi->domain = pci_msi_create_irq_domain(fwnode, &rzg3s_pcie_msi_info,
> + parent);
> + if (!msi->domain) {
> + irq_domain_remove(parent);
> + return dev_err_probe(dev, -ENOMEM,
> + "failed to create MSI domain\n");
> + }
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_msi_free_domains(struct rzg3s_pcie_msi *msi)
> +{
> + struct irq_domain *parent = msi->domain->parent;
> +
> + irq_domain_remove(msi->domain);
> + irq_domain_remove(parent);
> +}
> +
> +static int rzg3s_pcie_msi_hw_setup(struct rzg3s_pcie_host *host)
> +{
> + u8 regs = RZG3S_PCI_MSI_INT_NR / RZG3S_PCI_MSI_INT_PER_REG;
> + struct rzg3s_pcie_msi *msi = &host->msi;
> +
> + /*
> + * Set MSI window size. HW will set the window to
> + * RZG3S_PCI_MSI_INT_NR * 4 bytes.
> + */
> + writel(RZG3S_PCI_MSI_INT_NR - 1, host->axi + RZG3S_PCI_MSIRCVWMSKL);
> +
> + /* Set MSI window address and enable MSI window */
> + writel(upper_32_bits(msi->window_base),
> + host->axi + RZG3S_PCI_MSIRCVWADRU);
> + writel(lower_32_bits(msi->window_base) | RZG3S_PCI_MSIRCVWADRL_ENA |
> + RZG3S_PCI_MSIRCVWADRL_MSG_DATA_ENA,
> + host->axi + RZG3S_PCI_MSIRCVWADRL);
> +
> + /* Set MSI receive enable */
> + for (u8 reg_id = 0; reg_id < regs; reg_id++) {
> + writel(RZG3S_PCI_MSIRE_ENA,
> + host->axi + RZG3S_PCI_MSIRE(reg_id));
> + }
> +
> + /* Enable message receive interrupts */
> + writel(RZG3S_PCI_MSGRCVIE_MSG_RCV, host->axi + RZG3S_PCI_MSGRCVIE);
> +
> + /* Enable MSI */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIE,
> + RZG3S_PCI_PINTRCVIE_MSI,
> + RZG3S_PCI_PINTRCVIE_MSI);
> +
> + return 0;
> +}
> +
> +static int rzg3s_pcie_msi_setup(struct rzg3s_pcie_host *host)
> +{
> + size_t size = RZG3S_PCI_MSI_INT_NR * sizeof(u32);
> + struct rzg3s_pcie_msi *msi = &host->msi;
> + struct device *dev = host->dev;
> + int id, ret;
> +
> + msi->pages = __get_free_pages(GFP_KERNEL | GFP_DMA, 0);
> + if (!msi->pages)
> + return -ENOMEM;
> +
> + msi->dma_addr = dma_map_single(dev, (void *)msi->pages, size * 2,
> + DMA_BIDIRECTIONAL);
> + if (dma_mapping_error(dev, msi->dma_addr)) {
> + ret = -ENOMEM;
> + goto free_pages;
> + }
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section 34.4.5.2 Setting
> + * the MSI Window) the MSI window need to be within any AXI window. Find
> + * an AXI window to setup the MSI window.
> + */
> + for (id = 0; id < RZG3S_MAX_WINDOWS; id++) {
> + u64 base, basel, baseu;
> + u64 mask, maskl, masku;
> +
> + basel = readl(host->axi + RZG3S_PCI_AWBASEL(id));
> + /* Skip checking this AXI window if it's not enabled */
> + if (!(basel & RZG3S_PCI_AWBASEL_WIN_ENA))
> + continue;
> +
> + baseu = readl(host->axi + RZG3S_PCI_AWBASEU(id));
> + base = baseu << 32 | basel;
> +
> + maskl = readl(host->axi + RZG3S_PCI_AWMASKL(id));
> + masku = readl(host->axi + RZG3S_PCI_AWMASKU(id));
> + mask = masku << 32 | maskl;
> +
> + if (msi->dma_addr < base || msi->dma_addr > base + mask)
> + continue;
> +
> + break;
> + }
> +
> + if (id == RZG3S_MAX_WINDOWS) {
> + ret = -EINVAL;
> + goto dma_unmap;
> + }
> +
> + /* The MSI base address need to be aligned to the MSI size */
> + msi->window_base = ALIGN(msi->dma_addr, size);
> + if (msi->window_base < msi->dma_addr) {
> + ret = -EINVAL;
> + goto dma_unmap;
> + }
> +
> + rzg3s_pcie_msi_hw_setup(host);
> +
> + return 0;
> +
> +dma_unmap:
> + dma_unmap_single(dev, msi->dma_addr, size * 2, DMA_BIDIRECTIONAL);
> +free_pages:
> + free_pages(msi->pages, 0);
> + return ret;
> +}
> +
> +static int rzg3s_pcie_msi_enable(struct rzg3s_pcie_host *host)
> +{
> + struct platform_device *pdev = to_platform_device(host->dev);
> + struct rzg3s_pcie_msi *msi = &host->msi;
> + struct device *dev = host->dev;
> + const char *devname;
> + int irq, ret;
> +
> + mutex_init(&msi->map_lock);
Use devm_mutex_init() + remember error handling.
> +
> + irq = platform_get_irq_byname(pdev, "msi");
> + if (irq < 0)
> + return dev_err_probe(dev, irq ? irq : -EINVAL,
> + "Failed to get MSI IRQ!\n");
> +
> + devname = devm_kasprintf(dev, GFP_KERNEL, "%s-msi", dev_name(dev));
> + if (!devname)
> + return -ENOMEM;
> +
> + ret = rzg3s_pcie_msi_allocate_domains(msi);
> + if (ret)
> + return ret;
> +
> + ret = devm_request_irq(dev, irq, rzg3s_pcie_msi_irq, 0, devname, host);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to request IRQ: %d\n", ret);
> + goto free_domains;
> + }
> +
> + ret = rzg3s_pcie_msi_setup(host);
> + if (ret) {
> + dev_err_probe(dev, ret, "Failed to setup MSI!\n");
> + goto free_domains;
> + }
> +
> + return 0;
> +
> +free_domains:
> + rzg3s_pcie_msi_free_domains(msi);
I'm a bit worried about tear down order here as you seem to be mixing
devm* and non-devm*. All devres based teardown will occur only after the
probe returns error.
> + return ret;
> +}
> +
> +static void rzg3s_pcie_msi_teardown(void *data)
> +{
> + u8 regs = RZG3S_PCI_MSI_INT_NR / RZG3S_PCI_MSI_INT_PER_REG;
> + size_t size = RZG3S_PCI_MSI_INT_NR * sizeof(u32);
> + struct rzg3s_pcie_host *host = data;
> + struct rzg3s_pcie_msi *msi = &host->msi;
> +
> + /* Disable MSI */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIE,
> + RZG3S_PCI_PINTRCVIE_MSI, 0);
> +
> + /* Disable message receive interrupts */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_MSGRCVIE,
> + RZG3S_PCI_MSGRCVIE_MSG_RCV, 0);
> +
> + /* Disable MSI receive enable */
> + for (u8 reg_id = 0; reg_id < regs; reg_id++)
> + writel(0, host->axi + RZG3S_PCI_MSIRE(reg_id));
> +
> + /* Disable MSI window */
> + writel(0, host->axi + RZG3S_PCI_MSIRCVWADRL);
> +
> + /* Free unused memory */
> + dma_unmap_single(host->dev, msi->dma_addr, size * 2, DMA_BIDIRECTIONAL);
> + free_pages(msi->pages, 0);
> +
> + rzg3s_pcie_msi_free_domains(msi);
> +}
> +
> +static void rzg3s_pcie_intx_irq_ack(struct irq_data *d)
> +{
> + struct rzg3s_pcie_host *host = irq_data_get_irq_chip_data(d);
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIS,
> + RZG3S_PCI_PINTRCVIS_INTX(d->hwirq),
> + RZG3S_PCI_PINTRCVIS_INTX(d->hwirq));
> +}
> +
> +static void rzg3s_pcie_intx_irq_mask(struct irq_data *d)
> +{
> + struct rzg3s_pcie_host *host = irq_data_get_irq_chip_data(d);
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIE,
> + RZG3S_PCI_PINTRCVIE_INTX(d->hwirq), 0);
> +}
> +
> +static void rzg3s_pcie_intx_irq_unmask(struct irq_data *d)
> +{
> + struct rzg3s_pcie_host *host = irq_data_get_irq_chip_data(d);
> +
> + guard(raw_spinlock_irqsave)(&host->hw_lock);
> +
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PINTRCVIE,
> + RZG3S_PCI_PINTRCVIE_INTX(d->hwirq),
> + RZG3S_PCI_PINTRCVIE_INTX(d->hwirq));
> +}
> +
> +static struct irq_chip rzg3s_pcie_intx_irq_chip = {
> + .name = "PCIe INTx",
> + .irq_ack = rzg3s_pcie_intx_irq_ack,
> + .irq_mask = rzg3s_pcie_intx_irq_mask,
> + .irq_unmask = rzg3s_pcie_intx_irq_unmask,
> +};
> +
> +static int rzg3s_pcie_intx_map(struct irq_domain *domain, unsigned int irq,
> + irq_hw_number_t hwirq)
> +{
> + irq_set_chip_and_handler(irq, &rzg3s_pcie_intx_irq_chip,
> + handle_level_irq);
> + irq_set_chip_data(irq, domain->host_data);
> +
> + return 0;
> +}
> +
> +static const struct irq_domain_ops rzg3s_pcie_intx_domain_ops = {
> + .map = rzg3s_pcie_intx_map,
> + .xlate = irq_domain_xlate_onetwocell,
> +};
> +
> +static int rzg3s_pcie_intx_setup(struct rzg3s_pcie_host *host)
> +{
> + struct device *dev = host->dev;
> +
> + for (int i = 0; i < PCI_NUM_INTX; i++) {
> + struct platform_device *pdev = to_platform_device(dev);
> + char irq_name[5] = {0};
> + int irq;
> +
> + scnprintf(irq_name, ARRAY_SIZE(irq_name), "int%c", 97 + i);
> +
> + irq = platform_get_irq_byname(pdev, irq_name);
> + if (irq < 0)
> + return dev_err_probe(dev, -EINVAL,
> + "Failed to parse and map INT%c IRQ\n",
> + 65 + i);
> +
> + host->intx_irqs[i] = irq;
> + irq_set_chained_handler_and_data(irq,
> + rzg3s_pcie_intx_irq_handler,
> + host);
> + }
> +
> + host->intx_domain = irq_domain_add_linear(dev->of_node, PCI_NUM_INTX,
> + &rzg3s_pcie_intx_domain_ops,
> + host);
> + if (!host->intx_domain)
> + return dev_err_probe(dev, -EINVAL,
> + "Failed to add irq domain for INTx IRQs\n");
> + irq_domain_update_bus_token(host->intx_domain, DOMAIN_BUS_WIRED);
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_intx_teardown(void *data)
> +{
> + struct rzg3s_pcie_host *host = data;
> +
> + irq_domain_remove(host->intx_domain);
> +}
> +
> +static int rzg3s_pcie_set_max_link_speed(struct rzg3s_pcie_host *host)
> +{
> + u32 lcs, cs2, link_speed, remote_supported_link_speeds, tmp;
> + u8 ltssm_state_l0 = 0xc;
> + int ret;
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section 34.6.3 Caution
> + * when Changing the Speed Spontaneously) link speed change can be done
> + * only when the link training and status state machine in the PCIe Core
> + * Link is L0.
> + */
> + ret = readl_poll_timeout(host->axi + RZG3S_PCI_PCSTAT1, tmp,
> + FIELD_GET(RZG3S_PCI_PCSTAT1_LTSSM_STATE, tmp) == ltssm_state_l0,
> + 100, RZG3S_LTSSM_STATE_TIMEOUT_US);
> + if (ret) {
> + dev_dbg(host->dev,
> + "Could not set max link speed! LTSSM not in L0, state=%lx\n",
> + FIELD_GET(RZG3S_PCI_PCSTAT1_LTSSM_STATE, tmp));
> + return ret;
> + }
> +
> + lcs = readl(host->pcie + RZG3S_PCI_CFG_LINKCS);
> + cs2 = readl(host->axi + RZG3S_PCI_PCSTAT2);
> +
> + link_speed = FIELD_GET(RZG3S_PCI_CFG_LINKCS_CUR_LS, lcs);
> + remote_supported_link_speeds = FIELD_GET(RZG3S_PCI_PCSTAT2_SDRIRE, cs2);
> +
> + /*
> + * Return if link is @ 5.0 GT/s or the connected device doesn't support
> + * it.
> + */
> + if (link_speed == RZG3S_PCIE_LINK_SPEED_5_0_GTS ||
> + !(remote_supported_link_speeds & BIT(RZG3S_PCIE_LINK_SPEED_5_0_GTS)))
> + return 0;
> +
> + /* Set target Link speed to 5.0 GT/s */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_CFG_LINCS2,
> + RZG3S_PCI_CFG_LINCS2_TARGET_LS,
> + FIELD_PREP(RZG3S_PCI_CFG_LINCS2_TARGET_LS,
> + RZG3S_PCIE_LINK_SPEED_5_0_GTS));
> +
> + /* Request link speed change */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PCCTRL2,
> + RZG3S_PCI_PCCTRL2_LS_CHG_REQ |
> + RZG3S_PCI_PCCTRL2_LS_CHG,
> + RZG3S_PCI_PCCTRL2_LS_CHG_REQ |
> + FIELD_PREP(RZG3S_PCI_PCCTRL2_LS_CHG,
> + RZG3S_PCIE_LINK_SPEED_5_0_GTS - 1));
> +
> + ret = readl_poll_timeout(host->axi + RZG3S_PCI_PCSTAT2, cs2,
> + (cs2 & RZG3S_PCI_PCSTAT2_LS_CHG_DONE), 100,
> + RZG3S_LS_CHANGE_TIMEOUT_US);
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section 34.6.3 Caution
> + * when Changing the Speed Spontaneously) the PCI_PCCTRL2_LS_CHG_REQ
> + * should be de-asserted after checking for PCI_PCSTAT2_LS_CHG_DONE.
> + */
> + rzg3s_pcie_update_bits(host->axi, RZG3S_PCI_PCCTRL2,
> + RZG3S_PCI_PCCTRL2_LS_CHG_REQ, 0);
> +
> + return ret;
> +}
> +
> +static int rzg3s_pcie_config_init(struct rzg3s_pcie_host *host)
> +{
> + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(host);
> + struct resource_entry *ft;
> + struct resource *bus;
> + u8 subordinate_bus;
> + u8 secondary_bus;
> + u8 primary_bus;
> +
> + ft = resource_list_first_type(&bridge->windows, IORESOURCE_BUS);
> + if (!ft)
> + return -ENODEV;
> +
> + bus = ft->res;
> + primary_bus = bus->start;
> + secondary_bus = bus->start + 1;
> + subordinate_bus = bus->end;
> +
> + /* Enable access control to the CFGU */
> + writel(RZG3S_PCI_PERM_CFG_HWINIT_EN, host->axi + RZG3S_PCI_PERM);
> +
> + /* Update vendor ID and device ID */
> + writew(host->vendor_id, host->pcie + PCI_VENDOR_ID);
> + writew(host->device_id, host->pcie + PCI_DEVICE_ID);
> +
> + /* HW manual recommends to write 0xffffffff on initialization */
> + writel(0xffffffff, host->pcie + RZG3S_PCI_CFG_BARMSK00L);
> + writel(0xffffffff, host->pcie + RZG3S_PCI_CFG_BARMSK00U);
> +
> + /* Update bus info. */
> + writeb(primary_bus, host->pcie + PCI_PRIMARY_BUS);
> + writeb(secondary_bus, host->pcie + PCI_SECONDARY_BUS);
> + writeb(subordinate_bus, host->pcie + PCI_SUBORDINATE_BUS);
> +
> + /* Disable access control to the CFGU */
> + writel(0, host->axi + RZG3S_PCI_PERM);
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_irq_init(struct rzg3s_pcie_host *host)
> +{
> + /*
> + * According to the HW manual of the RZ/G3S (Rev.1.10, sections
> + * corresponding to all registers written with ~0U), the hardware
> + * ignores value written to unused bits. Writing ~0U to these registers
> + * should be safe.
> + */
> +
> + /* Clear the link state and PM transitions */
> + writel(RZG3S_PCI_PEIS0_DL_UPDOWN | RZG3S_PCI_PEIS0_RX_DLLP_PM_ENTER,
> + host->axi + RZG3S_PCI_PEIS0);
> +
> + /* Disable all interrupts */
> + writel(0, host->axi + RZG3S_PCI_PEIE0);
> +
> + /* Clear all parity and ecc error interrupts */
> + writel(~0U, host->axi + RZG3S_PCI_PEIS1);
> +
> + /* Disable all parity and ecc error interrupts */
> + writel(0, host->axi + RZG3S_PCI_PEIE1);
> +
> + /* Clear all AXI master error interrupts */
> + writel(~0U, host->axi + RZG3S_PCI_AMEIS);
> +
> + /* Clear all AXI slave error interrupts */
> + writel(~0U, host->axi + RZG3S_PCI_ASEIS1);
> +
> + /* Clear all message receive interrupts */
> + writel(~0U, host->axi + RZG3S_PCI_MSGRCVIS);
> +}
> +
> +static void rzg3s_pcie_power_resets_action(void *data)
> +{
> + struct rzg3s_pcie_host *host = data;
> +
> + reset_control_bulk_assert(host->data->num_power_resets,
> + host->power_resets);
> +}
> +
> +static void rzg3s_pcie_cfg_resets_action(void *data)
> +{
> + struct rzg3s_pcie_host *host = data;
> +
> + reset_control_bulk_assert(host->data->num_cfg_resets,
> + host->cfg_resets);
> +}
> +
> +static int rzg3s_pcie_resets_prepare(struct rzg3s_pcie_host *host)
> +{
> + const struct rzg3s_pcie_soc_data *data = host->data;
> + int ret;
> +
> + host->power_resets = devm_kmalloc_array(host->dev,
> + data->num_power_resets,
> + sizeof(*host->power_resets),
> + GFP_KERNEL);
> + if (!host->power_resets)
> + return -ENOMEM;
> +
> + for (unsigned int i = 0; i < data->num_power_resets; i++)
> + host->power_resets[i].id = data->power_resets[i];
> +
> + host->cfg_resets = devm_kmalloc_array(host->dev,
> + data->num_cfg_resets,
> + sizeof(*host->cfg_resets),
> + GFP_KERNEL);
For these 2 allocs, devm_kcalloc() to init it to zero?
> + if (!host->cfg_resets)
> + return -ENOMEM;
> +
> + for (unsigned int i = 0; i < data->num_cfg_resets; i++)
> + host->cfg_resets[i].id = data->cfg_resets[i];
> +
> + ret = devm_reset_control_bulk_get_exclusive(host->dev,
> + data->num_power_resets,
> + host->power_resets);
> + if (ret)
> + return ret;
> +
> + ret = devm_reset_control_bulk_get_exclusive(host->dev,
> + data->num_cfg_resets,
> + host->cfg_resets);
> + if (ret)
> + return ret;
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section
> + * 34.5.1.2 De-asserting the Reset) the PCIe IP needs to wait 5ms from
> + * power on to the de-assertion of reset.
> + */
> + usleep_range(5000, 5100);
> + ret = reset_control_bulk_deassert(data->num_power_resets,
> + host->power_resets);
> + if (ret)
> + return ret;
> +
> + return devm_add_action_or_reset(host->dev,
> + rzg3s_pcie_power_resets_action, host);
> +}
> +
> +static int rzg3s_pcie_host_init(struct rzg3s_pcie_host *host, bool probe)
> +{
> + u32 val;
> + int ret;
> +
> + /* Initialize the PCIe related registers */
> + ret = rzg3s_pcie_config_init(host);
> + if (ret)
> + return ret;
> +
> + /* Initialize the interrupts */
> + rzg3s_pcie_irq_init(host);
> +
> + ret = reset_control_bulk_deassert(host->data->num_cfg_resets,
> + host->cfg_resets);
> + if (ret)
> + return ret;
> +
> + /* Wait for link up */
> + ret = readl_poll_timeout(host->axi + RZG3S_PCI_PCSTAT1, val,
> + !(val & RZG3S_PCI_PCSTAT1_DL_DOWN_STS), 5000,
> + RZG3S_LINK_UP_TIMEOUT_US);
> + if (ret) {
> + reset_control_bulk_assert(host->data->num_cfg_resets,
> + host->cfg_resets);
> + return ret;
> + }
> +
> + val = readl(host->axi + RZG3S_PCI_PCSTAT2);
> + dev_info(host->dev, "PCIe link status [0x%x]\n", val);
> +
> + val = FIELD_GET(RZG3S_PCI_PCSTAT2_STATE_RX_DETECT, val);
> + dev_info(host->dev, "PCIe x%d: link up\n", hweight32(val));
> +
> + if (probe) {
> + ret = devm_add_action_or_reset(host->dev,
> + rzg3s_pcie_cfg_resets_action,
> + host);
> + }
> +
> + return ret;
> +}
> +
> +static void rzg3s_pcie_set_inbound_window(struct rzg3s_pcie_host *host,
> + u64 cpu_addr, u64 pci_addr, u64 size,
> + int id)
> +{
> + /* Set CPU window base address */
> + writel(upper_32_bits(cpu_addr), host->axi + RZG3S_PCI_ADESTU(id));
> + writel(lower_32_bits(cpu_addr), host->axi + RZG3S_PCI_ADESTL(id));
> +
> + /* Set window size */
> + writel(upper_32_bits(size), host->axi + RZG3S_PCI_AWMASKU(id));
> + writel(lower_32_bits(size), host->axi + RZG3S_PCI_AWMASKL(id));
> +
> + /* Set PCIe window base address and enable the window */
> + writel(upper_32_bits(pci_addr), host->axi + RZG3S_PCI_AWBASEU(id));
> + writel(lower_32_bits(pci_addr) | RZG3S_PCI_AWBASEL_WIN_ENA,
> + host->axi + RZG3S_PCI_AWBASEL(id));
> +}
> +
> +static int rzg3s_pcie_set_inbound_windows(struct rzg3s_pcie_host *host,
> + struct resource_entry *entry,
> + int *index)
> +{
> + u64 pci_addr = entry->res->start - entry->offset;
> + u64 cpu_addr = entry->res->start;
> + u64 cpu_end = entry->res->end;
> + u64 size_id = 0;
> + int id = *index;
> + u64 size;
> +
> + while (cpu_addr < cpu_end) {
> + if (id >= RZG3S_MAX_WINDOWS)
> + return dev_err_probe(host->dev, -EINVAL,
> + "Failed to set inbound windows!\n");
> +
> + size = resource_size(entry->res) - size_id;
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10,
> + * section 34.3.1.71 AXI Window Mask (Lower) Registers) the min
> + * size is 4K.
> + */
> + size = max(size, 4096);
SZ_4K + remember to add the #include for it if not there yet.
> +
> + /*
> + * According the RZ/G3S HW manual (Rev.1.10, sections:
> + * - 34.3.1.69 AXI Window Base (Lower) Registers
> + * - 34.3.1.71 AXI Window Mask (Lower) Registers
> + * - 34.3.1.73 AXI Destination (Lower) Registers)
> + * the CPU addr, PCIe addr, size should be 4K alined and be a
aligned
> + * power of 2.
> + */
> + size = ALIGN(size, 4096);
SZ_4K
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section
> + * 34.3.1.71 AXI Window Mask (Lower) Registers) HW expects first
> + * 12 LSB bits to be 0xfff. Extract 1 from size for this.
> + */
> + size = roundup_pow_of_two(size) - 1;
> +
> + cpu_addr = ALIGN(cpu_addr, 4096);
> + pci_addr = ALIGN(pci_addr, 4096);
Ditto.
> +
> + rzg3s_pcie_set_inbound_window(host, cpu_addr, pci_addr, size,
> + id);
> +
> + pci_addr += size;
> + cpu_addr += size;
> + size_id = size;
> + id++;
> + }
> + *index = id;
> +
> + return 0;
> +}
> +
> +static int rzg3s_pcie_parse_map_dma_ranges(struct rzg3s_pcie_host *host)
> +{
> + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(host);
> + struct resource_entry *entry;
> + int i = 0, ret;
> +
> + resource_list_for_each_entry(entry, &bridge->dma_ranges) {
> + ret = rzg3s_pcie_set_inbound_windows(host, entry, &i);
> + if (ret)
> + return ret;
> + }
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_set_outbound_window(struct rzg3s_pcie_host *host,
> + struct resource_entry *win,
> + int id)
> +{
> + struct resource *res = win->res;
> + resource_size_t size = resource_size(res);
> + resource_size_t res_start;
> +
> + if (res->flags & IORESOURCE_IO)
> + res_start = pci_pio_to_address(res->start) - win->offset;
> + else
> + res_start = res->start - win->offset;
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section 34.3.1.75 PCIe
> + * Window Base (Lower) Registers) the window base address need to be 4K
> + * aligned.
> + */
> + res_start = ALIGN(res_start, 4096);
> +
> + size = ALIGN(size, 4096);
Ditto.
> + size = roundup_pow_of_two(size) - 1;
> +
> + /* Set PCIe destination */
> + writel(upper_32_bits(res_start), host->axi + RZG3S_PCI_PDESTU(id));
> + writel(lower_32_bits(res_start), host->axi + RZG3S_PCI_PDESTL(id));
> +
> + /* Set PCIe window mask */
> + writel(upper_32_bits(size), host->axi + RZG3S_PCI_PWMASKU(id));
> + writel(lower_32_bits(size), host->axi + RZG3S_PCI_PWMASKL(id));
> +
> + /* Set PCIe window base and enable the window */
> + writel(upper_32_bits(res_start), host->axi + RZG3S_PCI_PWBASEU(id));
> + writel(lower_32_bits(res_start) | RZG3S_PCI_PWBASEL_ENA,
> + host->axi + RZG3S_PCI_PWBASEL(id));
> +}
> +
> +static int rzg3s_pcie_parse_map_ranges(struct rzg3s_pcie_host *host)
> +{
> + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(host);
> + struct resource_entry *win;
> + int i = 0;
> +
> + resource_list_for_each_entry(win, &bridge->windows) {
> + struct resource *res = win->res;
> +
> + if (i >= RZG3S_MAX_WINDOWS)
> + return dev_err_probe(host->dev, -EINVAL,
> + "Failed to set outbound windows!\n");
> +
> + if (!res->flags)
> + continue;
> +
> + switch (resource_type(res)) {
> + case IORESOURCE_IO:
> + case IORESOURCE_MEM:
> + rzg3s_pcie_set_outbound_window(host, win, i);
> + i++;
> + break;
> + }
> + }
> +
> + return 0;
> +}
> +
> +static int rzg3s_soc_pcie_init_phy(struct rzg3s_pcie_host *host)
> +{
> + static const u32 xcfgd_settings[RZG3S_PCI_PHY_XCFGD_NUM] = {
> + [8] = 0xe0006801, 0x007f7e30, 0x183e0000, 0x978ff500,
> + 0xec000000, 0x009f1400, 0x0000d009,
> + [17] = 0x78000000,
> + [19] = 0x00880000, 0x000005c0, 0x07000000, 0x00780920,
> + 0xc9400ce2, 0x90000c0c, 0x000c1414, 0x00005034,
> + 0x00006000, 0x00000001,
> + };
> + static const u32 xcfga_cmn_settings[RZG3S_PCI_PHY_XCFGA_CMN_NUM] = {
> + 0x00000d10, 0x08310100, 0x00c21404, 0x013c0010, 0x01874440,
> + 0x1a216082, 0x00103440, 0x00000080, 0x00000010, 0x0c1000c1,
> + 0x1000c100, 0x0222000c, 0x00640019, 0x00a00028, 0x01d11228,
> + 0x0201001d,
> + };
> + static const u32 xcfga_rx_settings[RZG3S_PCI_PHY_XCFGA_RX_NUM] = {
> + 0x07d55000, 0x030e3f00, 0x00000288, 0x102c5880, 0x0000000b,
> + 0x04141441, 0x00641641, 0x00d63d63, 0x00641641, 0x01970377,
> + 0x00190287, 0x00190028, 0x00000028,
> + };
> +
> + writel(RZG3S_PCI_PERM_PIPE_PHY_REG_EN, host->axi + RZG3S_PCI_PERM);
> +
> + for (u8 i = 0; i < RZG3S_PCI_PHY_XCFGD_NUM; i++)
> + writel(xcfgd_settings[i], host->axi + RZG3S_PCI_PHY_XCFGD(i));
> +
> + for (u8 i = 0; i < RZG3S_PCI_PHY_XCFGA_CMN_NUM; i++) {
> + writel(xcfga_cmn_settings[i],
> + host->axi + RZG3S_PCI_PHY_XCFGA_CMN(i));
> + }
> +
> + for (u8 i = 0; i < RZG3S_PCI_PHY_XCFGA_RX_NUM; i++) {
> + writel(xcfga_rx_settings[i],
> + host->axi + RZG3S_PCI_PHY_XCFGA_RX(i));
> + }
> +
> + writel(0x107, host->axi + RZG3S_PCI_PHY_XCFGA_TX);
> +
> + /* Select PHY settings values */
> + writel(RZG3S_PCI_PHY_XCFG_CTRL_PHYREG_SEL,
> + host->axi + RZG3S_PCI_PHY_XCFG_CTRL);
> +
> + writel(0, host->axi + RZG3S_PCI_PERM);
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_pm_runtime_put(void *data)
> +{
> + pm_runtime_put_sync(data);
> +}
> +
> +static void rzg3s_pcie_sysc_signal_action(void *data)
> +{
> + struct regmap *sysc = data;
> +
> + /*
> + * SYSC RST_RSM_B signal need to be asserted before turning off the
> + * power to the PHY.
> + */
> + regmap_update_bits(sysc, RZG3S_SYS_PCIE_RST_RSM_B,
> + RZG3S_SYS_PCIE_RST_RSM_B_MASK,
> + FIELD_PREP(RZG3S_SYS_PCIE_RST_RSM_B_MASK, 0));
> +}
> +
> +static int
> +rzg3s_pcie_host_setup(struct rzg3s_pcie_host *host,
> + int (*intx_setup)(struct rzg3s_pcie_host *host),
> + int (*msi_setup)(struct rzg3s_pcie_host *host),
> + bool probe)
> +{
> + struct device *dev = host->dev;
> + int ret;
> +
> + /* Set inbound windows */
> + ret = rzg3s_pcie_parse_map_dma_ranges(host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to set inbound windows!\n");
> +
> + /* Set outbound windows */
> + ret = rzg3s_pcie_parse_map_ranges(host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to set outbound windows!\n");
> +
> + /* Set the PHY, if any */
> + if (host->data->init_phy) {
> + ret = host->data->init_phy(host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to set the PHY!\n");
> + }
> +
> + if (intx_setup) {
> + ret = intx_setup(host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to setup INTx\n");
> +
> + if (probe) {
> + ret = devm_add_action_or_reset(dev,
> + rzg3s_pcie_intx_teardown,
> + host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to add INTx action\n");
> + }
> + }
> +
> + /* Set the MSIs */
> + if (IS_ENABLED(CONFIG_PCI_MSI)) {
> + ret = msi_setup(host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to setup MSIs\n");
> +
> + if (probe) {
> + ret = devm_add_action_or_reset(dev,
> + rzg3s_pcie_msi_teardown,
> + host);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to add MSI action\n");
> + }
> + }
> +
> + /* Initialize the host */
> + ret = rzg3s_pcie_host_init(host, probe);
> + if (ret)
> + return dev_err_probe(dev, ret,
> + "Failed to initialize the HW!\n");
> +
> + /* Try to set maximum supported link speed */
> + ret = rzg3s_pcie_set_max_link_speed(host);
> + if (ret)
> + dev_info(dev, "Failed to set max link speed\n");
> +
> + return 0;
> +}
> +
> +static void rzg3s_pcie_host_remove_action(void *data)
> +{
> + struct rzg3s_pcie_host *host = data;
> + struct pci_host_bridge *bridge = pci_host_bridge_from_priv(host);
> +
> + pci_lock_rescan_remove();
> + pci_stop_root_bus(bridge->bus);
> + pci_remove_root_bus(bridge->bus);
> + pci_unlock_rescan_remove();
> +}
> +
> +static int rzg3s_pcie_probe(struct platform_device *pdev)
> +{
> + struct pci_host_bridge *bridge;
> + struct device *dev = &pdev->dev;
> + struct device_node *np = dev->of_node;
> + struct device_node *sysc_np __free(device_node) =
> + of_parse_phandle(np, "renesas,sysc", 0);
> + struct rzg3s_pcie_host *host;
> + int ret;
> +
> + bridge = devm_pci_alloc_host_bridge(dev, sizeof(*host));
> + if (!bridge)
> + return -ENOMEM;
> +
> + host = pci_host_bridge_priv(bridge);
> + host->dev = dev;
> + host->data = device_get_match_data(dev);
> + platform_set_drvdata(pdev, host);
> +
> + host->axi = devm_platform_ioremap_resource(pdev, 0);
> + if (IS_ERR(host->axi))
> + return PTR_ERR(host->axi);
> + host->pcie = host->axi + RZG3S_PCI_CFG_BASE;
> +
> + ret = of_property_read_u32(np, "vendor-id", &host->vendor_id);
> + if (ret)
> + return ret;
> +
> + ret = of_property_read_u32(np, "device-id", &host->device_id);
> + if (ret)
> + return ret;
> +
> + host->sysc = syscon_node_to_regmap(sysc_np);
> + if (IS_ERR(host->sysc))
> + return PTR_ERR(host->sysc);
> +
> + ret = regmap_update_bits(host->sysc, RZG3S_SYS_PCIE_RST_RSM_B,
> + RZG3S_SYS_PCIE_RST_RSM_B_MASK,
> + FIELD_PREP(RZG3S_SYS_PCIE_RST_RSM_B_MASK, 1));
> + if (ret)
> + return ret;
> +
> + ret = devm_add_action_or_reset(dev, rzg3s_pcie_sysc_signal_action,
> + host->sysc);
> + if (ret)
> + return ret;
> +
> + ret = rzg3s_pcie_resets_prepare(host);
> + if (ret)
> + return ret;
> +
> + ret = devm_pm_runtime_enable(dev);
> + if (ret)
> + return ret;
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret)
> + return ret;
> +
> + ret = devm_add_action_or_reset(dev, rzg3s_pcie_pm_runtime_put, dev);
> + if (ret)
> + return ret;
> +
> + raw_spin_lock_init(&host->hw_lock);
> +
> + ret = rzg3s_pcie_host_setup(host, rzg3s_pcie_intx_setup,
> + rzg3s_pcie_msi_enable, true);
> + if (ret)
> + return ret;
> +
> + bridge->sysdata = host;
> + bridge->ops = &rzg3s_pcie_root_ops;
> + bridge->child_ops = &rzg3s_pcie_child_ops;
> + ret = pci_host_probe(bridge);
> + if (ret)
> + return ret;
> +
> + return devm_add_action_or_reset(dev, rzg3s_pcie_host_remove_action,
> + host);
> +}
> +
> +static int rzg3s_pcie_suspend_noirq(struct device *dev)
> +{
> + struct rzg3s_pcie_host *host = dev_get_drvdata(dev);
> + const struct rzg3s_pcie_soc_data *data = host->data;
> + struct regmap *sysc = host->sysc;
> + int ret;
> +
> + ret = pm_runtime_put_sync(dev);
> + if (ret)
> + return ret;
> +
> + ret = reset_control_bulk_assert(data->num_power_resets,
> + host->power_resets);
> + if (ret)
> + goto rpm_restore;
> +
> + ret = reset_control_bulk_assert(data->num_cfg_resets,
> + host->cfg_resets);
> + if (ret)
> + goto power_resets_restore;
> +
> + ret = regmap_update_bits(sysc, RZG3S_SYS_PCIE_RST_RSM_B,
> + RZG3S_SYS_PCIE_RST_RSM_B_MASK,
> + FIELD_PREP(RZG3S_SYS_PCIE_RST_RSM_B_MASK, 0));
> + if (ret)
> + goto cfg_resets_restore;
> +
> + return 0;
> +
> + /* Restore the previous state if any error happens */
> +cfg_resets_restore:
> + reset_control_bulk_deassert(data->num_cfg_resets,
> + host->cfg_resets);
> +power_resets_restore:
> + reset_control_bulk_deassert(data->num_power_resets,
> + host->power_resets);
> +rpm_restore:
> + pm_runtime_resume_and_get(dev);
> + return ret;
> +}
> +
> +static int rzg3s_pcie_resume_noirq(struct device *dev)
> +{
> + struct rzg3s_pcie_host *host = dev_get_drvdata(dev);
> + const struct rzg3s_pcie_soc_data *data = host->data;
> + struct regmap *sysc = host->sysc;
> + int ret;
> +
> + ret = regmap_update_bits(sysc, RZG3S_SYS_PCIE_RST_RSM_B,
> + RZG3S_SYS_PCIE_RST_RSM_B_MASK,
> + FIELD_PREP(RZG3S_SYS_PCIE_RST_RSM_B_MASK, 1));
> + if (ret)
> + return ret;
> +
> + /*
> + * According to the RZ/G3S HW manual (Rev.1.10, section
> + * 34.5.1.2 De-asserting the Reset) the PCIe IP needs to wait 5ms from
> + * power on to the de-assertion of reset.
> + */
> + usleep_range(5000, 5100);
Please make a define out of this since you're using it in multiple places.
> + ret = reset_control_bulk_deassert(data->num_power_resets,
> + host->power_resets);
> + if (ret)
> + goto assert_rst_rsm_b;
Maybe add a helper for the wait + bulk_deassert().
> +
> + ret = pm_runtime_resume_and_get(dev);
> + if (ret)
> + goto assert_power_resets;
> +
> + ret = rzg3s_pcie_host_setup(host, NULL, rzg3s_pcie_msi_hw_setup, false);
> + if (ret)
> + goto rpm_put;
> +
> + return 0;
> +
> + /*
> + * If any error happens there is no way to recover the IP. Put it in the
> + * lowest possible power state.
> + */
> +rpm_put:
> + pm_runtime_put_sync(dev);
> +assert_power_resets:
> + reset_control_bulk_assert(data->num_power_resets,
> + host->power_resets);
> +assert_rst_rsm_b:
> + regmap_update_bits(sysc, RZG3S_SYS_PCIE_RST_RSM_B,
> + RZG3S_SYS_PCIE_RST_RSM_B_MASK,
> + FIELD_PREP(RZG3S_SYS_PCIE_RST_RSM_B_MASK, 0));
> + return ret;
> +}
> +
> +static const struct dev_pm_ops rzg3s_pcie_pm_ops = {
> + NOIRQ_SYSTEM_SLEEP_PM_OPS(rzg3s_pcie_suspend_noirq,
> + rzg3s_pcie_resume_noirq)
> +};
> +
> +const char * const rzg3s_soc_power_resets[] = {
> + "aresetn", "rst_cfg_b", "rst_load_b",
> +};
> +
> +const char * const rzg3s_soc_cfg_resets[] = {
> + "rst_b", "rst_ps_b", "rst_gp_b", "rst_rsm_b",
> +};
> +
> +static const struct rzg3s_pcie_soc_data rzg3s_soc_data = {
> + .power_resets = rzg3s_soc_power_resets,
> + .num_power_resets = ARRAY_SIZE(rzg3s_soc_power_resets),
> + .cfg_resets = rzg3s_soc_cfg_resets,
> + .num_cfg_resets = ARRAY_SIZE(rzg3s_soc_cfg_resets),
> + .init_phy = rzg3s_soc_pcie_init_phy,
> +};
> +
> +static const struct of_device_id rzg3s_pcie_of_match[] = {
> + {
> + .compatible = "renesas,r9a08g045s33-pcie",
> + .data = &rzg3s_soc_data,
> + },
> + {},
> +};
> +
> +static struct platform_driver rzg3s_pcie_driver = {
> + .driver = {
> + .name = "rzg3s-pcie-host",
> + .of_match_table = rzg3s_pcie_of_match,
> + .pm = pm_ptr(&rzg3s_pcie_pm_ops),
> + },
> + .probe = rzg3s_pcie_probe,
> +};
> +module_platform_driver(rzg3s_pcie_driver);
> +
> +MODULE_DESCRIPTION("Renesas RZ/G3S PCIe host driver");
> +MODULE_AUTHOR("Claudiu Beznea <claudiu.beznea.uj@...renesas.com>");
> +MODULE_LICENSE("GPL");
>
--
i.
Powered by blists - more mailing lists