linux-kernel - Re: [PATCH v3 3/5] net: phy: qcom: at803x: Add Qualcomm IPQ5018 Internal PHY support

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <3704c056-91b9-464a-8bc8-7a98a9d9b7a7@lunn.ch>
Date: Mon, 2 Jun 2025 14:41:56 +0200
From: Andrew Lunn <andrew@...n.ch>
To: george.moussalem@...look.com
Cc: Heiner Kallweit <hkallweit1@...il.com>,
	Russell King <linux@...linux.org.uk>,
	"David S. Miller" <davem@...emloft.net>,
	Eric Dumazet <edumazet@...gle.com>,
	Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
	Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Florian Fainelli <f.fainelli@...il.com>,
	Philipp Zabel <p.zabel@...gutronix.de>,
	Bjorn Andersson <andersson@...nel.org>,
	Konrad Dybcio <konradybcio@...nel.org>,
	Michael Turquette <mturquette@...libre.com>,
	Stephen Boyd <sboyd@...nel.org>, netdev@...r.kernel.org,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-arm-msm@...r.kernel.org, linux-clk@...r.kernel.org
Subject: Re: [PATCH v3 3/5] net: phy: qcom: at803x: Add Qualcomm IPQ5018
 Internal PHY support

> +	/* PHY DAC values are optional and only set in a PHY to PHY link architecture */
> +	if (priv->set_short_cable_dac) {
> +		/* setting MDAC (Multi-level Digital-to-Analog Converter) in MMD1 */
> +		phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, IPQ5018_PHY_MMD1_MDAC,
> +			       IPQ5018_PHY_DAC_MASK, IPQ5018_PHY_MMD1_MDAC_VAL);
> +
> +		/* setting EDAC (Error-detection and Correction) in debug register */
> +		at803x_debug_reg_mask(phydev, IPQ5018_PHY_DEBUG_EDAC,
> +				      IPQ5018_PHY_DAC_MASK, IPQ5018_PHY_DEBUG_EDAC_VAL);
> +	}

In the binding you say:


+            If not set, it is assumed the MDI output pins of this PHY are directly
+            connected to an RJ45 connector and default DAC values will be used.

So shouldn't there be an else clause here setting these two values to
their default, undoing what the bootloader might of done etc.

Or you can change the binding, and say something like:

+            If not set, DAC values are not modified.

We often need a tristate in DT, set something, unset something, leave
it as it is. But that does not exist in DT in an easy form :-(

	Andrew