| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250602143930.943830-1-Frank.Li@nxp.com>
Date: Mon, 2 Jun 2025 10:39:29 -0400
From: Frank Li <Frank.Li@....com>
To: Linus Walleij <linus.walleij@...aro.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
linux-gpio@...r.kernel.org (open list:PIN CONTROL SUBSYSTEM),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-kernel@...r.kernel.org (open list)
Cc: imx@...ts.linux.dev
Subject: [PATCH 1/1] dt-bindings: pinctrl: convert xp,lpc1850-scu.txt to yaml format
Convert nxp,lpc1850-scu.txt to yaml format.
Additional changes:
- keep child name *_cfg to align legancy very old platform dts file.
- remove label in examples.
- just keep one examples.
Signed-off-by: Frank Li <Frank.Li@....com>
---
.../bindings/pinctrl/nxp,lpc1850-scu.txt | 71 ---------------
.../bindings/pinctrl/nxp,lpc1850-scu.yaml | 91 +++++++++++++++++++
2 files changed, 91 insertions(+), 71 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
create mode 100644 Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
deleted file mode 100644
index bd8b0c69fa447..0000000000000
--- a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.txt
+++ /dev/null
@@ -1,71 +0,0 @@
-NXP LPC18xx/43xx SCU pin controller Device Tree Bindings
---------------------------------------------------------
-
-Required properties:
-- compatible : Should be "nxp,lpc1850-scu"
-- reg : Address and length of the register set for the device
-- clocks : Clock specifier (see clock bindings for details)
-
-The lpc1850-scu driver uses the generic pin multiplexing and generic pin
-configuration documented in pinctrl-bindings.txt.
-
-The following generic nodes are supported:
- - function
- - pins
- - bias-disable
- - bias-pull-up
- - bias-pull-down
- - drive-strength
- - input-enable
- - input-disable
- - input-schmitt-enable
- - input-schmitt-disable
- - slew-rate
-
-NXP specific properties:
- - nxp,gpio-pin-interrupt : Assign pin to gpio pin interrupt controller
- irq number 0 to 7. See example below.
-
-Not all pins support all properties so either refer to the NXP 1850/4350
-user manual or the pin table in the pinctrl-lpc18xx driver for supported
-pin properties.
-
-Example:
-pinctrl: pinctrl@...86000 {
- compatible = "nxp,lpc1850-scu";
- reg = <0x40086000 0x1000>;
- clocks = <&ccu1 CLK_CPU_SCU>;
-
- i2c0_pins: i2c0-pins {
- i2c0_pins_cfg {
- pins = "i2c0_scl", "i2c0_sda";
- function = "i2c0";
- input-enable;
- };
- };
-
- uart0_pins: uart0-pins {
- uart0_rx_cfg {
- pins = "pf_11";
- function = "uart0";
- bias-disable;
- input-enable;
- };
-
- uart0_tx_cfg {
- pins = "pf_10";
- function = "uart0";
- bias-disable;
- };
- };
-
- gpio_joystick_pins: gpio-joystick-pins {
- gpio_joystick_1_cfg {
- pins = "p9_0";
- function = "gpio";
- nxp,gpio-pin-interrupt = <0>;
- input-enable;
- bias-disable;
- };
- };
-};
diff --git a/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml
new file mode 100644
index 0000000000000..4df47fee3a228
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/nxp,lpc1850-scu.yaml
@@ -0,0 +1,91 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/nxp,lpc1850-scu.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP LPC18xx/43xx SCU pin controller
+
+description: |
+ The following generic nodes are supported:
+ - function
+ - pins
+ - bias-disable
+ - bias-pull-up
+ - bias-pull-down
+ - drive-strength
+ - input-enable
+ - input-disable
+ - input-schmitt-enable
+ - input-schmitt-disable
+ - slew-rat
+ Not all pins support all properties so either refer to the NXP 1850/4350
+ user manual or the pin table in the pinctrl-lpc18xx driver for supported
+ pin properties.
+
+maintainers:
+ - Frank Li <Frank.Li@....com>
+
+properties:
+ compatible:
+ const: nxp,lpc1850-scu
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+patternProperties:
+ '-pins$':
+ type: object
+ additionalProperties: false
+
+ patternProperties:
+ '_cfg$':
+ type: object
+
+ allOf:
+ - $ref: pincfg-node.yaml#
+ - $ref: pinmux-node.yaml#
+
+ unevaluatedProperties: false
+
+ properties:
+ nxp,gpio-pin-interrupt:
+ $ref: /schemas/types.yaml#/definitions/uint32
+ minimum: 0
+ maximum: 7
+ description:
+ Assign pin to gpio pin interrupt controller
+ irq number 0 to 7. See example below.
+
+required:
+ - compatible
+ - reg
+ - clocks
+
+allOf:
+ - $ref: pinctrl.yaml#
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/lpc18xx-ccu.h>
+
+ pinctrl@...86000 {
+ compatible = "nxp,lpc1850-scu";
+ reg = <0x40086000 0x1000>;
+ clocks = <&ccu1 CLK_CPU_SCU>;
+
+ gpio-joystick-pins {
+ gpio-joystick-1_cfg {
+ pins = "p9_0";
+ function = "gpio";
+ nxp,gpio-pin-interrupt = <0>;
+ input-enable;
+ bias-disable;
+ };
+ };
+ };
--
2.34.1
Powered by blists - more mailing lists