linux-kernel - [PATCH] usb: dwc3: xilinx: set coherency mode for AMD versal adaptive platform

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-ID: <1748976818-710088-1-git-send-email-radhey.shyam.pandey@amd.com>
Date: Wed, 4 Jun 2025 00:23:38 +0530
From: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
To: <Thinh.Nguyen@...opsys.com>, <gregkh@...uxfoundation.org>,
	<michal.simek@....com>
CC: <linux-usb@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
	<linux-kernel@...r.kernel.org>, <git@....com>, Radhey Shyam Pandey
	<radhey.shyam.pandey@....com>
Subject: [PATCH] usb: dwc3: xilinx: set coherency mode for AMD versal adaptive platform

If device is coherent or if DMA (direct memory access) is translated by
an IOMMU then program USB2.0 IP to route transactions through the CCI for
coherency even if the target of transaction is in low power domain (LPD).

Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@....com>
---
 drivers/usb/dwc3/dwc3-xilinx.c | 34 ++++++++++++++++++++++------------
 1 file changed, 22 insertions(+), 12 deletions(-)

diff --git a/drivers/usb/dwc3/dwc3-xilinx.c b/drivers/usb/dwc3/dwc3-xilinx.c
index 4ca7f6240d07..00e613c4d8c0 100644
--- a/drivers/usb/dwc3/dwc3-xilinx.c
+++ b/drivers/usb/dwc3/dwc3-xilinx.c
@@ -32,6 +32,9 @@
 #define XLNX_USB_TRAFFIC_ROUTE_CONFIG		0x005C
 #define XLNX_USB_TRAFFIC_ROUTE_FPD		0x1
 
+/* USB 2.0 IP Register */
+#define XLNX_USB2_TRAFFIC_ROUTE_CONFIG		0x0044
+
 #define XLNX_USB_FPD_PIPE_CLK			0x7c
 #define PIPE_CLK_DESELECT			1
 #define PIPE_CLK_SELECT				0
@@ -66,6 +69,23 @@ static void dwc3_xlnx_mask_phy_rst(struct dwc3_xlnx *priv_data, bool mask)
 	writel(reg, priv_data->regs + XLNX_USB_PHY_RST_EN);
 }
 
+static void dwc3_xlnx_set_coherency(struct dwc3_xlnx *priv_data, u32 coherency_offset)
+{
+	struct device		*dev = priv_data->dev;
+	u32			reg;
+
+	/*
+	 * This routes the USB DMA traffic to go through FPD path instead
+	 * of reaching DDR directly. This traffic routing is needed to
+	 * make SMMU and CCI work with USB DMA.
+	 */
+	if (of_dma_is_coherent(dev->of_node) || device_iommu_mapped(dev)) {
+		reg = readl(priv_data->regs + coherency_offset);
+		reg |= XLNX_USB_TRAFFIC_ROUTE_FPD;
+		writel(reg, priv_data->regs + coherency_offset);
+	}
+}
+
 static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
 {
 	struct device		*dev = priv_data->dev;
@@ -92,6 +112,7 @@ static int dwc3_xlnx_init_versal(struct dwc3_xlnx *priv_data)
 	}
 
 	dwc3_xlnx_mask_phy_rst(priv_data, true);
+	dwc3_xlnx_set_coherency(priv_data, XLNX_USB2_TRAFFIC_ROUTE_CONFIG);
 
 	return 0;
 }
@@ -102,7 +123,6 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 	struct reset_control	*crst, *hibrst, *apbrst;
 	struct gpio_desc	*reset_gpio;
 	int			ret = 0;
-	u32			reg;
 
 	priv_data->usb3_phy = devm_phy_optional_get(dev, "usb3-phy");
 	if (IS_ERR(priv_data->usb3_phy)) {
@@ -219,17 +239,7 @@ static int dwc3_xlnx_init_zynqmp(struct dwc3_xlnx *priv_data)
 		usleep_range(5000, 10000);
 	}
 
-	/*
-	 * This routes the USB DMA traffic to go through FPD path instead
-	 * of reaching DDR directly. This traffic routing is needed to
-	 * make SMMU and CCI work with USB DMA.
-	 */
-	if (of_dma_is_coherent(dev->of_node) || device_iommu_mapped(dev)) {
-		reg = readl(priv_data->regs + XLNX_USB_TRAFFIC_ROUTE_CONFIG);
-		reg |= XLNX_USB_TRAFFIC_ROUTE_FPD;
-		writel(reg, priv_data->regs + XLNX_USB_TRAFFIC_ROUTE_CONFIG);
-	}
-
+	dwc3_xlnx_set_coherency(priv_data, XLNX_USB_TRAFFIC_ROUTE_CONFIG);
 err:
 	return ret;
 }

base-commit: a0bea9e39035edc56a994630e6048c8a191a99d8
-- 
2.34.1