linux-kernel - [PATCH 2/4] arm64: dts: ti: k3-j7200-main: Make the "scm

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250603095609.33569-3-j-choudhary@ti.com>
Date: Tue, 3 Jun 2025 15:26:07 +0530
From: Jayesh Choudhary <j-choudhary@...com>
To: <nm@...com>, <vigneshr@...com>, <devicetree@...r.kernel.org>
CC: <kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
        <conor+dt@...nel.org>, <s-vadapalli@...com>, <rogerq@...nel.org>,
        <afd@...com>, <linux-kernel@...r.kernel.org>,
        <linux-arm-kernel@...ts.infradead.org>, <j-choudhary@...com>
Subject: [PATCH 2/4] arm64: dts: ti: k3-j7200-main: Make the "scm_conf" node a "simple-bus"

The "scm_conf" bus need not be "syscon". Now that we have "pcie*_ctrl"
child nodes for "ti,syscon-pcie-ctrl" property in "pcie" nodes, change
"scm_conf" node to "simple-bus".
Also remove "reg" property as it is not needed by "simple-bus".

Signed-off-by: Jayesh Choudhary <j-choudhary@...com>
---
 arch/arm64/boot/dts/ti/k3-j7200-main.dtsi | 5 ++---
 1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
index 5ce5f0a3d6f5..a3f6eea9d325 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-main.dtsi
@@ -25,9 +25,8 @@ atf-sram@0 {
 		};
 	};
 
-	scm_conf: scm-conf@...000 {
-		compatible = "ti,j721e-system-controller", "syscon", "simple-mfd";
-		reg = <0x00 0x00100000 0x00 0x1c000>;
+	scm_conf: bus@...000 {
+		compatible = "simple-bus";
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x00 0x00 0x00100000 0x1c000>;
-- 
2.34.1