[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <drr7cngryldptgzbmac7l2xpryugbrnydke3alq5da2mfvmgm5@nwjsqkef7ypc>
Date: Tue, 3 Jun 2025 16:11:36 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
Cc: lpieralisi@...nel.org, kwilczynski@...nel.org,
manivannan.sadhasivam@...aro.org, robh@...nel.org, bhelgaas@...gle.com,
krzk+dt@...nel.org, neil.armstrong@...aro.org, abel.vesa@...aro.org,
kw@...ux.com, conor+dt@...nel.org, vkoul@...nel.org, kishon@...nel.org,
andersson@...nel.org, konradybcio@...nel.org,
linux-arm-msm@...r.kernel.org, linux-pci@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, quic_qianyu@...cinc.com,
quic_krichai@...cinc.com, quic_vbadigan@...cinc.com
Subject: Re: [PATCH v1 2/4] dt-bindings: PCI: qcom,pcie-sa8775p: document
link_down reset
On Thu, May 29, 2025 at 11:54:14AM +0800, Ziyue Zhang wrote:
> Each PCIe controller on sa8775p supports 'link_down'reset on hardware,
> document it.
I don't think it's possible to "support" reset in hardware. Either it
exists and is routed, or it is not.
>
> Signed-off-by: Ziyue Zhang <quic_ziyuzhan@...cinc.com>
> ---
> .../devicetree/bindings/pci/qcom,pcie-sa8775p.yaml | 13 +++++++++----
> 1 file changed, 9 insertions(+), 4 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
> index e3fa232da2ca..805258cbcf2f 100644
> --- a/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
> +++ b/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml
> @@ -61,11 +61,14 @@ properties:
> - const: global
>
> resets:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
Shouldn't we just update this to maxItems:2 / minItems:2 and drop
minItems:1 from the next clause?
>
> reset-names:
> + minItems: 1
> items:
> - - const: pci
> + - const: pci # PCIe core reset
> + - const: link_down # PCIe link down reset
>
> required:
> - interconnects
> @@ -161,8 +164,10 @@ examples:
>
> power-domains = <&gcc PCIE_0_GDSC>;
>
> - resets = <&gcc GCC_PCIE_0_BCR>;
> - reset-names = "pci";
> + resets = <&gcc GCC_PCIE_0_BCR>,
> + <&gcc GCC_PCIE_0_LINK_DOWN_BCR>;
> + reset-names = "pci",
> + "link_down";
>
> perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
> wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
> --
> 2.34.1
>
>
> --
> linux-phy mailing list
> linux-phy@...ts.infradead.org
> https://lists.infradead.org/mailman/listinfo/linux-phy
--
With best wishes
Dmitry
Powered by blists - more mailing lists