lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250604-s2mpg1x-regulators-v1-14-6038740f49ae@linaro.org>
Date: Wed, 04 Jun 2025 16:25:53 +0100
From: André Draszik <andre.draszik@...aro.org>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, Rob Herring <robh@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Krzysztof Kozlowski <krzk@...nel.org>, 
 Liam Girdwood <lgirdwood@...il.com>, Mark Brown <broonie@...nel.org>, 
 Lee Jones <lee@...nel.org>, Linus Walleij <linus.walleij@...aro.org>, 
 Bartosz Golaszewski <brgl@...ev.pl>
Cc: Peter Griffin <peter.griffin@...aro.org>, 
 Will McVicker <willmcvicker@...gle.com>, kernel-team@...roid.com, 
 linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-gpio@...r.kernel.org, 
 André Draszik <andre.draszik@...aro.org>
Subject: [PATCH 14/17] regulator: s2mps11: refactor S2MPG10
 ::set_voltage_time() for S2MPG11 reuse

The upcoming S2MPG11 support needs a similar, but different version of
::set_voltage_time(). For S2MPG10, the downwards and upwards ramps for
a rail are at different offsets at the same bit positions, while for
S2MPG11 the ramps are at the same offset at different bit positions.

Refactor the existing version slightly to allow reuse.

Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
 drivers/regulator/s2mps11.c | 32 ++++++++++++++++++++++----------
 1 file changed, 22 insertions(+), 10 deletions(-)

diff --git a/drivers/regulator/s2mps11.c b/drivers/regulator/s2mps11.c
index 6fe6787044c40216f7a0355119981b74a8f56e58..f427895637a32f26e2960ce7c7879632f0bc2dcb 100644
--- a/drivers/regulator/s2mps11.c
+++ b/drivers/regulator/s2mps11.c
@@ -562,26 +562,23 @@ static int s2mpg10_regulator_buck_enable_time(struct regulator_dev *rdev)
 		+ DIV_ROUND_UP(curr_uV, s2mpg10_desc->enable_ramp_rate));
 }
 
-static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
-						   int old_uV, int new_uV)
+static int s2mpg1x_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+						   int old_uV, int new_uV,
+						   unsigned int ramp_reg,
+						   unsigned int ramp_mask)
 {
-	unsigned int ramp_reg, ramp_sel, ramp_rate;
+	unsigned int ramp_sel, ramp_rate;
 	int ret;
 
 	if (old_uV == new_uV)
 		return 0;
 
-	ramp_reg = rdev->desc->ramp_reg;
-	if (old_uV > new_uV)
-		/* The downwards ramp is at a different offset. */
-		ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
-
 	ret = regmap_read(rdev->regmap, ramp_reg, &ramp_sel);
 	if (ret)
 		return ret;
 
-	ramp_sel &= rdev->desc->ramp_mask;
-	ramp_sel >>= ffs(rdev->desc->ramp_mask) - 1;
+	ramp_sel &= ramp_mask;
+	ramp_sel >>= ffs(ramp_mask) - 1;
 	if (ramp_sel >= rdev->desc->n_ramp_values ||
 	    !rdev->desc->ramp_delay_table)
 		return -EINVAL;
@@ -591,6 +588,21 @@ static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
 	return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_rate);
 }
 
+static int s2mpg10_regulator_buck_set_voltage_time(struct regulator_dev *rdev,
+						   int old_uV, int new_uV)
+{
+	unsigned int ramp_reg;
+
+	ramp_reg = rdev->desc->ramp_reg;
+	if (old_uV > new_uV)
+		/* The downwards ramp is at a different offset. */
+		ramp_reg += S2MPG10_PMIC_DVS_RAMP4 - S2MPG10_PMIC_DVS_RAMP1;
+
+	return s2mpg1x_regulator_buck_set_voltage_time(rdev, old_uV, new_uV,
+						       ramp_reg,
+						       rdev->desc->ramp_mask);
+}
+
 /*
  * We assign both, ::set_voltage_time() and ::set_voltage_time_sel(), because
  * only if the latter is != NULL, the regulator core will call neither during

-- 
2.49.0.1204.g71687c7c1d-goog


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ