| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250605202630.GA622231@bhelgaas>
Date: Thu, 5 Jun 2025 15:26:30 -0500
From: Bjorn Helgaas <helgaas@...nel.org>
To: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
Cc: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
cros-qcom-dts-watchers@...omium.org,
Bjorn Helgaas <bhelgaas@...gle.com>, linux-arm-msm@...r.kernel.org,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pci@...r.kernel.org, quic_vbadigan@...cinc.com,
quic_mrana@...cinc.com, Sherry Sun <sherry.sun@....com>
Subject: Re: [PATCH v3 2/2] PCI/portdrv: Add support for PCIe wake interrupt
On Thu, Jun 05, 2025 at 10:54:45AM +0530, Krishna Chaitanya Chundru wrote:
> PCIe wake interrupt is needed for bringing back PCIe device state
> from D3cold to D0.
Does this refer to the WAKE# signal or Beacon or both? I guess the
comments in the patch suggest WAKE#. Is there any spec section we can
cite here?
> Implement new functions, of_pci_setup_wake_irq() and
> of_pci_teardown_wake_irq(), to manage wake interrupts for PCI devices
> using the Device Tree.
>
> From the port bus driver call these functions to enable wake support
> for bridges.
What is the connection to bridges and portdrv? WAKE# is described in
PCIe r6.0, sec 5.3.3.2, and PCIe CEM r6.0, sec 2.3, but AFAICS neither
restricts it to bridges.
Unless there's some related functionality in a Root Port, RCEC, or
Switch Port, maybe this code should be elsewhere, like
set_pcie_port_type(), so we could set this up for any PCIe device that
has a WAKE# description?
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@....qualcomm.com>
> Tested-by: Sherry Sun <sherry.sun@....com>
> ---
> drivers/pci/of.c | 67 ++++++++++++++++++++++++++++++++++++++++++++++
> drivers/pci/pci.h | 6 +++++
> drivers/pci/pcie/portdrv.c | 12 ++++++++-
> 3 files changed, 84 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/pci/of.c b/drivers/pci/of.c
> index ab7a8252bf4137a17971c3eb8ab70ce78ca70969..3487cd62d81f0a66e7408e286475e8d91c2e410a 100644
> --- a/drivers/pci/of.c
> +++ b/drivers/pci/of.c
> @@ -7,6 +7,7 @@
> #define pr_fmt(fmt) "PCI: OF: " fmt
>
> #include <linux/cleanup.h>
> +#include <linux/gpio/consumer.h>
> #include <linux/irqdomain.h>
> #include <linux/kernel.h>
> #include <linux/pci.h>
> @@ -15,6 +16,7 @@
> #include <linux/of_address.h>
> #include <linux/of_pci.h>
> #include <linux/platform_device.h>
> +#include <linux/pm_wakeirq.h>
> #include "pci.h"
>
> #ifdef CONFIG_PCI
> @@ -966,3 +968,68 @@ u32 of_pci_get_slot_power_limit(struct device_node *node,
> return slot_power_limit_mw;
> }
> EXPORT_SYMBOL_GPL(of_pci_get_slot_power_limit);
> +
> +/**
> + * of_pci_slot_setup_wake_irq - Set up wake interrupt for PCI device
> + * @pdev: The PCI device structure
> + *
> + * This function sets up the wake interrupt for a PCI device by getting the
> + * corresponding WAKE# gpio from the device tree, and configuring it as a
> + * dedicated wake interrupt.
> + *
> + * Return: 0 if the WAKE# gpio is not available or successfully parsed else
> + * errno otherwise.
> + */
> +int of_pci_slot_setup_wake_irq(struct pci_dev *pdev)
> +{
> + struct gpio_desc *wake;
> + struct device_node *dn;
> + int ret, wake_irq;
> +
> + dn = pci_device_to_OF_node(pdev);
> + if (!dn)
> + return 0;
> +
> + wake = devm_fwnode_gpiod_get(&pdev->dev, of_fwnode_handle(dn),
> + "wake", GPIOD_IN, NULL);
I guess this finds "wake-gpio" or "wake-gpios", as used in
Documentation/devicetree/bindings/pci/qcom,pcie.yaml,
qcom,pcie-sa8775p.yaml, etc? Are these names specified in any generic
place, e.g.,
https://github.com/devicetree-org/dt-schema/tree/main/dtschema/schemas/pci?
> + if (IS_ERR(wake) && PTR_ERR(wake) != -ENOENT) {
> + dev_err(&pdev->dev, "Failed to get wake GPIO: %ld\n", PTR_ERR(wake));
> + return PTR_ERR(wake);
> + }
> + if (IS_ERR(wake))
> + return 0;
> +
> + wake_irq = gpiod_to_irq(wake);
> + if (wake_irq < 0) {
> + dev_err(&pdev->dev, "Dailed to get wake irq: %d\n", wake_irq);
s/Dailed/Failed/
> + return wake_irq;
> + }
> +
> + device_init_wakeup(&pdev->dev, true);
> +
> + ret = dev_pm_set_dedicated_wake_irq(&pdev->dev, wake_irq);
> + if (ret < 0) {
> + dev_err(&pdev->dev, "Failed to set wake IRQ: %d\n", ret);
> + device_init_wakeup(&pdev->dev, false);
> + return ret;
> + }
> + irq_set_irq_type(wake_irq, IRQ_TYPE_EDGE_FALLING);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(of_pci_slot_setup_wake_irq);
> +
> +/**
> + * of_pci_slot_teardown_wake_irq - Teardown wake interrupt setup for PCI device
> + *
> + * @pdev: The PCI device structure
> + *
> + * This function tears down the wake interrupt setup for a PCI device,
> + * clearing the dedicated wake interrupt and disabling device wake-up.
> + */
> +void of_pci_slot_teardown_wake_irq(struct pci_dev *pdev)
> +{
> + dev_pm_clear_wake_irq(&pdev->dev);
> + device_init_wakeup(&pdev->dev, false);
> +}
> +EXPORT_SYMBOL_GPL(of_pci_slot_teardown_wake_irq);
> diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
> index 39f368d2f26de872f6484c6cb4e12752abfff7bc..dd7a4da1225bbdb1dff82707b580e7e0a95a5abf 100644
> --- a/drivers/pci/pci.h
> +++ b/drivers/pci/pci.h
> @@ -888,6 +888,9 @@ void pci_release_of_node(struct pci_dev *dev);
> void pci_set_bus_of_node(struct pci_bus *bus);
> void pci_release_bus_of_node(struct pci_bus *bus);
>
> +int of_pci_slot_setup_wake_irq(struct pci_dev *pdev);
> +void of_pci_slot_teardown_wake_irq(struct pci_dev *pdev);
> +
> int devm_of_pci_bridge_init(struct device *dev, struct pci_host_bridge *bridge);
> bool of_pci_supply_present(struct device_node *np);
>
> @@ -931,6 +934,9 @@ static inline int devm_of_pci_bridge_init(struct device *dev, struct pci_host_br
> return 0;
> }
>
> +static int of_pci_slot_setup_wake_irq(struct pci_dev *pdev) { return 0; }
> +static void of_pci_slot_teardown_wake_irq(struct pci_dev *pdev) { }
> +
> static inline bool of_pci_supply_present(struct device_node *np)
> {
> return false;
> diff --git a/drivers/pci/pcie/portdrv.c b/drivers/pci/pcie/portdrv.c
> index e8318fd5f6ed537a1b236a3a0f054161d5710abd..9a6beec87e4523a33ecace684109cd44e025c97b 100644
> --- a/drivers/pci/pcie/portdrv.c
> +++ b/drivers/pci/pcie/portdrv.c
> @@ -694,12 +694,18 @@ static int pcie_portdrv_probe(struct pci_dev *dev,
> (type != PCI_EXP_TYPE_RC_EC)))
> return -ENODEV;
>
> + status = of_pci_slot_setup_wake_irq(dev);
> + if (status)
> + return status;
> +
> if (type == PCI_EXP_TYPE_RC_EC)
> pcie_link_rcec(dev);
>
> status = pcie_port_device_register(dev);
> - if (status)
> + if (status) {
> + of_pci_slot_teardown_wake_irq(dev);
> return status;
> + }
>
> pci_save_state(dev);
>
> @@ -732,6 +738,8 @@ static void pcie_portdrv_remove(struct pci_dev *dev)
>
> pcie_port_device_remove(dev);
>
> + of_pci_slot_teardown_wake_irq(dev);
> +
> pci_disable_device(dev);
> }
>
> @@ -744,6 +752,8 @@ static void pcie_portdrv_shutdown(struct pci_dev *dev)
> }
>
> pcie_port_device_remove(dev);
> +
> + of_pci_slot_teardown_wake_irq(dev);
> }
>
> static pci_ers_result_t pcie_portdrv_error_detected(struct pci_dev *dev,
>
> --
> 2.34.1
>
Powered by blists - more mailing lists