linux-kernel - Re: Latest kernel firmware update breaks intel wifi card.

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CADiockCOpPuWxYB6-Rz30vcZhXDFK8ruD9ozDSg5BS4ncmtR8A@mail.gmail.com>
Date: Thu, 5 Jun 2025 10:24:24 -0400
From: Alex Davis <alex47794@...il.com>
To: Bagas Sanjaya <bagasdotme@...il.com>
Cc: Linux Kernel Mailing List <linux-kernel@...r.kernel.org>, 
	Linux Wireless <linux-wireless@...r.kernel.org>, 
	Linux Regressions <regressions@...ts.linux.dev>, 
	Miri Korenblit <miriam.rachel.korenblit@...el.com>
Subject: Re: Latest kernel firmware update breaks intel wifi card.

The working version is commit id 3fbaee2; the non-working version is
commit id 167118c

On Wed, Jun 4, 2025 at 9:48 PM Bagas Sanjaya <bagasdotme@...il.com> wrote:
>
> [also Cc: iwlwifi folks]
>
> On Wed, Jun 04, 2025 at 05:20:31PM -0400, Alex Davis wrote:
> > I have the following card:
> > 2f:00.0 Network controller: Intel Corporation Wi-Fi 7(802.11be)
> > AX1775*/AX1790*/BE20*/BE401/BE1750* 2x2 (rev 1a)
> >     Subsystem: Intel Corporation BE200 320MHz [Gale Peak]
> >     Flags: bus master, fast devsel, latency 0, IRQ 19, IOMMU group 16
> >     Memory at aa800000 (64-bit, non-prefetchable) [size=16K]
> >     Capabilities: [40] Power Management version 3
> >     Capabilities: [50] MSI: Enable- Count=1/1 Maskable- 64bit+
> >     Capabilities: [70] Express Endpoint, IntMsgNum 0
> >     Capabilities: [b0] MSI-X: Enable+ Count=32 Masked-
> >     Capabilities: [100] Advanced Error Reporting
> >     Capabilities: [148] Secondary PCI Express
> >     Capabilities: [158] Physical Layer 16.0 GT/s <?>
> >     Capabilities: [17c] Lane Margining at the Receiver
> >     Capabilities: [188] Latency Tolerance Reporting
> >     Capabilities: [190] L1 PM Substates
> >     Capabilities: [1a0] Vendor Specific Information: ID=0002 Rev=4 Len=100 <?>
> >     Capabilities: [2a0] Data Link Feature <?>
> >     Capabilities: [2ac] Precision Time Measurement
> >     Capabilities: [2b8] Vendor Specific Information: ID=0003 Rev=1 Len=054 <?>
> >     Capabilities: [500] Vendor Specific Information: ID=0023 Rev=1 Len=010 <?>
> >     Kernel driver in use: iwlwifi
> >
> > With the current firmware, I get the following error in dmesg:
> > iwlwifi 0000:2f:00.0: Detected crf-id 0x2001910, cnv-id 0x2001910 wfpm
> > id 0x80000000
> > iwlwifi 0000:2f:00.0: PCI dev 272b/00f4, rev=0x472, rfid=0x112200
> > iwlwifi 0000:2f:00.0: Detected Intel(R) Wi-Fi 7 BE200 320MHz
> > iwlwifi 0000:2f:00.0: Direct firmware load for
> > iwlwifi-gl-c0-fm-c0-93.ucode failed with error -2
> > iwlwifi 0000:2f:00.0: TLV_FW_FSEQ_VERSION: FSEQ Version: 0.182.4.1
> > iwlwifi 0000:2f:00.0: loaded firmware version 92.67ce4588.0
> > gl-c0-fm-c0-92.ucode op_mode iwlmvm
> > iwlwifi 0000:2f:00.0: Detected RF FM, rfid=0x112200
> > iwlwifi 0000:2f:00.0: loaded PNVM version 71864399
> > iwlwifi 0000:2f:00.0: Microcode SW error detected. Restarting 0x0.
> > iwlwifi 0000:2f:00.0: Start IWL Error Log Dump:
> > iwlwifi 0000:2f:00.0: Transport status: 0x0000004A, valid: 6
> > iwlwifi 0000:2f:00.0: Loaded firmware version: 92.67ce4588.0
> > gl-c0-fm-c0-92.ucode
> > iwlwifi 0000:2f:00.0: 0x00000071 | NMI_INTERRUPT_UMAC_FATAL
> > iwlwifi 0000:2f:00.0: 0x000002F0 | trm_hw_status0
> > iwlwifi 0000:2f:00.0: 0x00000000 | trm_hw_status1
> > iwlwifi 0000:2f:00.0: 0x002C43D6 | branchlink2
> > iwlwifi 0000:2f:00.0: 0x002B89BE | interruptlink1
> > iwlwifi 0000:2f:00.0: 0x002B89BE | interruptlink2
> > iwlwifi 0000:2f:00.0: 0x00015ADA | data1
> > iwlwifi 0000:2f:00.0: 0x00000010 | data2
> > iwlwifi 0000:2f:00.0: 0x00000000 | data3
> > iwlwifi 0000:2f:00.0: 0x00000000 | beacon time
> > iwlwifi 0000:2f:00.0: 0x0001A67A | tsf low
> > iwlwifi 0000:2f:00.0: 0x00000000 | tsf hi
> > iwlwifi 0000:2f:00.0: 0x00000000 | time gp1
> > iwlwifi 0000:2f:00.0: 0x00046F7B | time gp2
> > iwlwifi 0000:2f:00.0: 0x00000001 | uCode revision type
> > iwlwifi 0000:2f:00.0: 0x0000005C | uCode version major
> > iwlwifi 0000:2f:00.0: 0x67CE4588 | uCode version minor
> > iwlwifi 0000:2f:00.0: 0x00000472 | hw version
> > iwlwifi 0000:2f:00.0: 0x58C80002 | board version
> > iwlwifi 0000:2f:00.0: 0x800CFD1B | hcmd
> > iwlwifi 0000:2f:00.0: 0x00020000 | isr0
> > iwlwifi 0000:2f:00.0: 0x20000000 | isr1
> > iwlwifi 0000:2f:00.0: 0x48F00002 | isr2
> > iwlwifi 0000:2f:00.0: 0x00C0001C | isr3
> > iwlwifi 0000:2f:00.0: 0x02000000 | isr4
> > iwlwifi 0000:2f:00.0: 0x00000000 | last cmd Id
> > iwlwifi 0000:2f:00.0: 0x00015ADA | wait_event
> > iwlwifi 0000:2f:00.0: 0x10000004 | l2p_control
> > iwlwifi 0000:2f:00.0: 0x00000000 | l2p_duration
> > iwlwifi 0000:2f:00.0: 0x00000000 | l2p_mhvalid
> > iwlwifi 0000:2f:00.0: 0x00000000 | l2p_addr_match
> > iwlwifi 0000:2f:00.0: 0x0000000B | lmpm_pmg_sel
> > iwlwifi 0000:2f:00.0: 0x00000000 | timestamp
> > iwlwifi 0000:2f:00.0: 0x00000024 | flow_handler
> >
> > When I use the file iwlwifi-gl-c0-fm-c0.pnvm from the previous
> > version, it works. I'm running kernel 6.12.30 in Slackware current
>
> What firmware versions?
>
> Confused...
>
> --
> An old man doll... just what I always wanted! - Clara