[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <r3tnmjl5bnlyhgblhfqwouu57oh5tfpmfsrx5xczzmsovalvse@mujphkc4mv5k>
Date: Sun, 8 Jun 2025 14:37:07 +0300
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Yongbang Shi <shiyongbang@...wei.com>
Cc: xinliang.liu@...aro.org, tiantao6@...ilicon.com,
maarten.lankhorst@...ux.intel.com, mripard@...nel.org,
tzimmermann@...e.de, airlied@...il.com, daniel@...ll.ch,
kong.kongxinwei@...ilicon.com, liangjian010@...wei.com,
chenjianmin@...wei.com, lidongming5@...wei.com, libaihan@...wei.com,
shenjian15@...wei.com, shaojijie@...wei.com,
jani.nikula@...ux.intel.com, dri-devel@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH drm-dp 02/10] drm/hisilicon/hibmc: fix dp probabilistical
detect errors after HPD irq
On Fri, May 30, 2025 at 05:54:24PM +0800, Yongbang Shi wrote:
> From: Baihan Li <libaihan@...wei.com>
>
> The debouncing when HPD pulled out still remains sometimes, 200ms still can
> not ensure helper_detect() is correct. So add a flag to hold the sink
> status, and changed detect_ctx() functions by using flag to check status.
>
> Fixes: 3c7623fb5bb6 ("drm/hisilicon/hibmc: Enable this hot plug detect of irq feature")
> Signed-off-by: Baihan Li <libaihan@...wei.com>
> ---
> drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h | 1 +
> .../gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c | 38 +++++++++++++------
> 2 files changed, 28 insertions(+), 11 deletions(-)
>
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
> index 665f5b166dfb..68867475508c 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
> +++ b/drivers/gpu/drm/hisilicon/hibmc/dp/dp_hw.h
> @@ -50,6 +50,7 @@ struct hibmc_dp {
> struct drm_dp_aux aux;
> struct hibmc_dp_cbar_cfg cfg;
> u32 irq_status;
> + int hpd_status;
> };
>
> int hibmc_dp_hw_init(struct hibmc_dp *dp);
> diff --git a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
> index d06832e62e96..191fb434baa7 100644
> --- a/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
> +++ b/drivers/gpu/drm/hisilicon/hibmc/hibmc_drm_dp.c
> @@ -13,7 +13,8 @@
> #include "hibmc_drm_drv.h"
> #include "dp/dp_hw.h"
>
> -#define DP_MASKED_SINK_HPD_PLUG_INT BIT(2)
> +#define HIBMC_DP_MASKED_SINK_HPD_PLUG_INT BIT(2)
> +#define HIBMC_DP_MASKED_SINK_HPD_UNPLUG_INT BIT(3)
>
> static int hibmc_dp_connector_get_modes(struct drm_connector *connector)
> {
> @@ -34,9 +35,12 @@ static int hibmc_dp_connector_get_modes(struct drm_connector *connector)
> static int hibmc_dp_detect(struct drm_connector *connector,
> struct drm_modeset_acquire_ctx *ctx, bool force)
> {
> - mdelay(200);
> + struct hibmc_dp *dp = to_hibmc_dp(connector);
>
> - return drm_connector_helper_detect_from_ddc(connector, ctx, force);
> + if (dp->hpd_status)
> + return connector_status_connected;
> + else
> + return connector_status_disconnected;
> }
>
> static const struct drm_connector_helper_funcs hibmc_dp_conn_helper_funcs = {
> @@ -115,22 +119,34 @@ irqreturn_t hibmc_dp_hpd_isr(int irq, void *arg)
> {
> struct drm_device *dev = (struct drm_device *)arg;
> struct hibmc_drm_private *priv = to_hibmc_drm_private(dev);
> + struct hibmc_dp *dp = &priv->dp;
> int idx;
>
> if (!drm_dev_enter(dev, &idx))
> return -ENODEV;
>
> - if (priv->dp.irq_status & DP_MASKED_SINK_HPD_PLUG_INT) {
> - drm_dbg_dp(&priv->dev, "HPD IN isr occur!\n");
> - hibmc_dp_hpd_cfg(&priv->dp);
> + if (dp->hpd_status) { /* only check unplug int when the last status is HPD in */
I think this way you'll ignore HPD short pulses. Could you possibly
clarify whether it is the case or not?
> + if ((dp->irq_status & HIBMC_DP_MASKED_SINK_HPD_UNPLUG_INT)) {
> + drm_dbg_dp(dev, "HPD OUT isr occur.");
> + hibmc_dp_reset_link(dp);
> + dp->hpd_status = 0;
> + if (dev->registered)
> + drm_connector_helper_hpd_irq_event(&dp->connector);
> + } else {
> + drm_warn(dev, "HPD OUT occurs, irq status err: %u", dp->irq_status);
These should be ratelimited.
> + }
> } else {
> - drm_dbg_dp(&priv->dev, "HPD OUT isr occur!\n");
> - hibmc_dp_reset_link(&priv->dp);
> + if (dp->irq_status & HIBMC_DP_MASKED_SINK_HPD_PLUG_INT) {
> + drm_dbg_dp(&priv->dev, "HPD IN isr occur.");
> + hibmc_dp_hpd_cfg(dp);
> + dp->hpd_status = 1;
> + if (dev->registered)
> + drm_connector_helper_hpd_irq_event(&dp->connector);
> + } else {
> + drm_warn(dev, "HPD IN occurs, irq status err: %u", dp->irq_status);
> + }
> }
>
> - if (dev->registered)
> - drm_connector_helper_hpd_irq_event(&priv->dp.connector);
There is no need to, just call this function always at the end of the
ISR handler as it is done currently.
> -
> drm_dev_exit(idx);
>
> return IRQ_HANDLED;
> --
> 2.33.0
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists