[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ca71a8b8-88b8-4d81-a17d-1b46e10e55a9@lunn.ch>
Date: Mon, 9 Jun 2025 17:16:56 +0200
From: Andrew Lunn <andrew@...n.ch>
To: Stefano Radaelli <stefano.radaelli21@...il.com>
Cc: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>, imx@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH v1] arm64: dts: freescale: imx8mp-var-som: Add EQoS
support with MaxLinear PHY
On Mon, Jun 09, 2025 at 04:06:42PM +0200, Stefano Radaelli wrote:
> Enable the EQoS Ethernet controller on the i.MX8MP VAR-SOM with the
> integrated Maxlinear MXL86110 PHY. The PHY is connected to the EQOS
> MDIO bus at address 4.
> + ethphy0: ethernet-phy@4 {
> + compatible = "ethernet-phy-ieee802.3-c22";
> + reg = <4>;
> + at803x,eee-disabled;
> + eee-broken-1000t;
The commit message says it is a Maxlinear. So at803x vendor properties
are not relevant here.
Andrew
Powered by blists - more mailing lists