[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <30a7f1a6-1e04-4fc5-9bea-e2b5956b28b7@kernel.org>
Date: Tue, 10 Jun 2025 16:53:34 +0200
From: Hans de Goede <hansg@...nel.org>
To: Mario Limonciello <superm1@...nel.org>,
Huacai Chen <chenhuacai@...nel.org>,
Geert Uytterhoeven <geert@...ux-m68k.org>
Cc: Borislav Petkov <bp@...en8.de>, Jean Delvare <jdelvare@...e.com>,
Andi Shyti <andi.shyti@...nel.org>,
Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>,
Jonathan Corbet <corbet@....net>,
Mario Limonciello <mario.limonciello@....com>,
Yazen Ghannam <yazen.ghannam@....com>, Thomas Gleixner <tglx@...utronix.de>,
Ingo Molnar <mingo@...hat.com>, Dave Hansen <dave.hansen@...ux.intel.com>,
"maintainer:X86 ARCHITECTURE (32-BIT AND 64-BIT)" <x86@...nel.org>,
"H . Peter Anvin" <hpa@...or.com>,
Shyam Sundar S K <Shyam-sundar.S-k@....com>,
Hans de Goede <hdegoede@...hat.com>,
"open list:DOCUMENTATION" <linux-doc@...r.kernel.org>,
open list <linux-kernel@...r.kernel.org>,
"open list:I2C/SMBUS CONTROLLER DRIVERS FOR PC" <linux-i2c@...r.kernel.org>,
"open list:AMD PMC DRIVER" <platform-driver-x86@...r.kernel.org>,
Ingo Molnar <mingo@...nel.org>, linux-mips@...r.kernel.org,
loongarch@...ts.linux.dev
Subject: Re: [PATCH v5 2/5] i2c: piix4: Depends on X86
Hi,
On 10-Jun-25 16:12, Mario Limonciello wrote:
> On 6/10/2025 2:24 AM, Huacai Chen wrote:
>> On Tue, Jun 10, 2025 at 5:16 PM Geert Uytterhoeven <geert@...ux-m68k.org> wrote:
>>>
>>> Hi Mario,
>>>
>>> CC mips, loongarch
>>>
>>> On Wed, 23 Apr 2025 at 01:49, Mario Limonciello <superm1@...nel.org> wrote:
>>>> From: Mario Limonciello <mario.limonciello@....com>
>>>>
>>>> PIIX4 and compatible controllers are only for X86. As some headers are
>>>> being moved into x86 specific headers PIIX4 won't compile on non-x86.
>>>>
>>>> Suggested-by: Ingo Molnar <mingo@...nel.org>
>>>> Signed-off-by: Mario Limonciello <mario.limonciello@....com>
>>>
>>> Thanks for your patch, which is now commit 7e173eb82ae97175
>>> ("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86")
>>> in v6.16-rc1.
>>>
>>>> --- a/drivers/i2c/busses/Kconfig
>>>> +++ b/drivers/i2c/busses/Kconfig
>>>> @@ -200,7 +200,7 @@ config I2C_ISMT
>>>>
>>>> config I2C_PIIX4
>>>> tristate "Intel PIIX4 and compatible (ATI/AMD/Serverworks/Broadcom/SMSC)"
>>>> - depends on PCI && HAS_IOPORT
>>>> + depends on PCI && HAS_IOPORT && X86
>>>
>>> Are you sure this south-bridge is not used on non-x86 platforms?
>>> It is enabled in several non-x86 defconfigs:
>>>
>>> arch/loongarch/configs/loongson3_defconfig:CONFIG_I2C_PIIX4=y
>>> arch/mips/configs/ip27_defconfig:CONFIG_I2C_PIIX4=m
>>> arch/mips/configs/loongson2k_defconfig:CONFIG_I2C_PIIX4=y
>>> arch/mips/configs/loongson3_defconfig:CONFIG_I2C_PIIX4=y
>>>
>>> The loongarch and loongson entries are probably bogus, but I wouldn't
>>> be surprised if the SGI Onyx and Origin do use Intel south-bridges.
>> Loongson can use AMD SB700/SB800 south bridges, which have I2C_PIIX4.
>
> Well we could revert this patch, but it's going to be a compile failure because of 624b0d5696a89b138408d385899dd35372db324b and other patches that go on top of that.
>
> My current leaning is we make a dummy fch.h header for these archs with #defines for 0.
Move "fch.h" to include/linux/platform/x86/ so that it is available on all arches
and if necessary ifdef out anything x86 specific in the C-code referencing it ?
Regards,
Hans
Powered by blists - more mailing lists