[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250610215933.84795-5-l.rubusch@gmail.com>
Date: Tue, 10 Jun 2025 21:59:26 +0000
From: Lothar Rubusch <l.rubusch@...il.com>
To: lars@...afoo.de,
Michael.Hennerich@...log.com,
jic23@...nel.org,
dlechner@...libre.com,
nuno.sa@...log.com,
andy@...nel.org,
corbet@....net
Cc: linux-iio@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-doc@...r.kernel.org,
eraretuya@...il.com,
l.rubusch@...il.com
Subject: [PATCH v9 04/11] iio: accel: adxl345: simplify interrupt mapping
Replace mapping all sensor interrupts to the corresponding interrupt
line using regmap_assign_bits() since it takes a boolean directly.
Further prefer the units.h identifier to cover the full register when bits
are set.
This is a refactoring change and should not impact functionality.
Signed-off-by: Lothar Rubusch <l.rubusch@...il.com>
---
drivers/iio/accel/adxl345_core.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index cae9e37e216f..18c625d323ba 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -1216,9 +1216,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
* interrupts to the INT1 pin, whereas bits set to 1 send their respective
* interrupts to the INT2 pin. The intio shall convert this accordingly.
*/
- regval = intio ? 0xff : 0;
-
- ret = regmap_write(st->regmap, ADXL345_REG_INT_MAP, regval);
+ ret = regmap_assign_bits(st->regmap, ADXL345_REG_INT_MAP,
+ U8_MAX, intio);
if (ret)
return ret;
--
2.39.5
Powered by blists - more mailing lists