| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <12af3273-a8b3-d88e-3c5a-290595e346a2@linux.intel.com>
Date: Wed, 11 Jun 2025 14:49:11 +0300 (EEST)
From: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
To: "Jiri Slaby (SUSE)" <jirislaby@...nel.org>
cc: gregkh@...uxfoundation.org, linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH 12/33] serial: 8250: move RSA functions to 8250_rsa.c
On Wed, 11 Jun 2025, Jiri Slaby (SUSE) wrote:
> They are RSA-specific, so should live in a preexisting 8250_rsa.c. Move
> them there.
>
> Signed-off-by: Jiri Slaby (SUSE) <jirislaby@...nel.org>
No unexpected change found in the diff-of-diffs,
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@...ux.intel.com>
--
i.
> ---
> drivers/tty/serial/8250/8250.h | 8 +++
> drivers/tty/serial/8250/8250_port.c | 99 -----------------------------
> drivers/tty/serial/8250/8250_rsa.c | 92 +++++++++++++++++++++++++++
> 3 files changed, 100 insertions(+), 99 deletions(-)
>
> diff --git a/drivers/tty/serial/8250/8250.h b/drivers/tty/serial/8250/8250.h
> index 18530c31a598..cfe6ba286b45 100644
> --- a/drivers/tty/serial/8250/8250.h
> +++ b/drivers/tty/serial/8250/8250.h
> @@ -318,8 +318,16 @@ static inline void serial8250_pnp_exit(void) { }
>
> #ifdef CONFIG_SERIAL_8250_RSA
> void univ8250_rsa_support(struct uart_ops *ops);
> +void rsa_enable(struct uart_8250_port *up);
> +void rsa_disable(struct uart_8250_port *up);
> +void rsa_autoconfig(struct uart_8250_port *up);
> +void rsa_reset(struct uart_8250_port *up);
> #else
> static inline void univ8250_rsa_support(struct uart_ops *ops) { }
> +static inline void rsa_enable(struct uart_8250_port *up) {}
> +static inline void rsa_disable(struct uart_8250_port *up) {}
> +static inline void rsa_autoconfig(struct uart_8250_port *up) {}
> +static inline void rsa_reset(struct uart_8250_port *up) {}
> #endif
>
> #ifdef CONFIG_SERIAL_8250_FINTEK
> diff --git a/drivers/tty/serial/8250/8250_port.c b/drivers/tty/serial/8250/8250_port.c
> index d8a90818f431..476f5fc50237 100644
> --- a/drivers/tty/serial/8250/8250_port.c
> +++ b/drivers/tty/serial/8250/8250_port.c
> @@ -713,105 +713,6 @@ static void serial8250_clear_IER(struct uart_8250_port *up)
> serial_out(up, UART_IER, 0);
> }
>
> -#ifdef CONFIG_SERIAL_8250_RSA
> -/*
> - * Attempts to turn on the RSA FIFO. Returns zero on failure.
> - * We set the port uart clock rate if we succeed.
> - */
> -static int __rsa_enable(struct uart_8250_port *up)
> -{
> - unsigned char mode;
> - int result;
> -
> - mode = serial_in(up, UART_RSA_MSR);
> - result = mode & UART_RSA_MSR_FIFO;
> -
> - if (!result) {
> - serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
> - mode = serial_in(up, UART_RSA_MSR);
> - result = mode & UART_RSA_MSR_FIFO;
> - }
> -
> - if (result)
> - up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
> -
> - return result;
> -}
> -
> -/*
> - * If this is an RSA port, see if we can kick it up to the higher speed clock.
> - */
> -static void rsa_enable(struct uart_8250_port *up)
> -{
> - if (up->port.type != PORT_RSA)
> - return;
> -
> - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
> - uart_port_lock_irq(&up->port);
> - __rsa_enable(up);
> - uart_port_unlock_irq(&up->port);
> - }
> - if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
> - serial_out(up, UART_RSA_FRR, 0);
> -}
> -
> -/*
> - * Attempts to turn off the RSA FIFO and resets the RSA board back to 115kbps compat mode. It is
> - * unknown why interrupts were disabled in here. However, the caller is expected to preserve this
> - * behaviour by grabbing the spinlock before calling this function.
> - */
> -static void rsa_disable(struct uart_8250_port *up)
> -{
> - unsigned char mode;
> - int result;
> -
> - if (up->port.type != PORT_RSA)
> - return;
> -
> - if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16)
> - return;
> -
> - uart_port_lock_irq(&up->port);
> - mode = serial_in(up, UART_RSA_MSR);
> - result = !(mode & UART_RSA_MSR_FIFO);
> -
> - if (!result) {
> - serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
> - mode = serial_in(up, UART_RSA_MSR);
> - result = !(mode & UART_RSA_MSR_FIFO);
> - }
> -
> - if (result)
> - up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
> - uart_port_unlock_irq(&up->port);
> -}
> -
> -static void rsa_autoconfig(struct uart_8250_port *up)
> -{
> - /* Only probe for RSA ports if we got the region. */
> - if (up->port.type != PORT_16550A)
> - return;
> - if (!(up->probe & UART_PROBE_RSA))
> - return;
> -
> - if (__rsa_enable(up))
> - up->port.type = PORT_RSA;
> -}
> -
> -static void rsa_reset(struct uart_8250_port *up)
> -{
> - if (up->port.type != PORT_RSA)
> - return;
> -
> - serial_out(up, UART_RSA_FRR, 0);
> -}
> -#else
> -static inline void rsa_enable(struct uart_8250_port *up) {}
> -static inline void rsa_disable(struct uart_8250_port *up) {}
> -static inline void rsa_autoconfig(struct uart_8250_port *up) {}
> -static inline void rsa_reset(struct uart_8250_port *up) {}
> -#endif /* CONFIG_SERIAL_8250_RSA */
> -
> /*
> * This is a quickie test to see how big the FIFO is.
> * It doesn't work at all the time, more's the pity.
> diff --git a/drivers/tty/serial/8250/8250_rsa.c b/drivers/tty/serial/8250/8250_rsa.c
> index 4c8b9671bd41..59d2ecf23068 100644
> --- a/drivers/tty/serial/8250/8250_rsa.c
> +++ b/drivers/tty/serial/8250/8250_rsa.c
> @@ -107,6 +107,98 @@ void univ8250_rsa_support(struct uart_ops *ops)
> module_param_hw_array(probe_rsa, ulong, ioport, &probe_rsa_count, 0444);
> MODULE_PARM_DESC(probe_rsa, "Probe I/O ports for RSA");
>
> +/*
> + * Attempts to turn on the RSA FIFO. Returns zero on failure.
> + * We set the port uart clock rate if we succeed.
> + */
> +static int __rsa_enable(struct uart_8250_port *up)
> +{
> + unsigned char mode;
> + int result;
> +
> + mode = serial_in(up, UART_RSA_MSR);
> + result = mode & UART_RSA_MSR_FIFO;
> +
> + if (!result) {
> + serial_out(up, UART_RSA_MSR, mode | UART_RSA_MSR_FIFO);
> + mode = serial_in(up, UART_RSA_MSR);
> + result = mode & UART_RSA_MSR_FIFO;
> + }
> +
> + if (result)
> + up->port.uartclk = SERIAL_RSA_BAUD_BASE * 16;
> +
> + return result;
> +}
> +
> +/*
> + * If this is an RSA port, see if we can kick it up to the higher speed clock.
> + */
> +void rsa_enable(struct uart_8250_port *up)
> +{
> + if (up->port.type != PORT_RSA)
> + return;
> +
> + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16) {
> + uart_port_lock_irq(&up->port);
> + __rsa_enable(up);
> + uart_port_unlock_irq(&up->port);
> + }
> + if (up->port.uartclk == SERIAL_RSA_BAUD_BASE * 16)
> + serial_out(up, UART_RSA_FRR, 0);
> +}
> +
> +/*
> + * Attempts to turn off the RSA FIFO and resets the RSA board back to 115kbps compat mode. It is
> + * unknown why interrupts were disabled in here. However, the caller is expected to preserve this
> + * behaviour by grabbing the spinlock before calling this function.
> + */
> +void rsa_disable(struct uart_8250_port *up)
> +{
> + unsigned char mode;
> + int result;
> +
> + if (up->port.type != PORT_RSA)
> + return;
> +
> + if (up->port.uartclk != SERIAL_RSA_BAUD_BASE * 16)
> + return;
> +
> + uart_port_lock_irq(&up->port);
> + mode = serial_in(up, UART_RSA_MSR);
> + result = !(mode & UART_RSA_MSR_FIFO);
> +
> + if (!result) {
> + serial_out(up, UART_RSA_MSR, mode & ~UART_RSA_MSR_FIFO);
> + mode = serial_in(up, UART_RSA_MSR);
> + result = !(mode & UART_RSA_MSR_FIFO);
> + }
> +
> + if (result)
> + up->port.uartclk = SERIAL_RSA_BAUD_BASE_LO * 16;
> + uart_port_unlock_irq(&up->port);
> +}
> +
> +void rsa_autoconfig(struct uart_8250_port *up)
> +{
> + /* Only probe for RSA ports if we got the region. */
> + if (up->port.type != PORT_16550A)
> + return;
> + if (!(up->probe & UART_PROBE_RSA))
> + return;
> +
> + if (__rsa_enable(up))
> + up->port.type = PORT_RSA;
> +}
> +
> +void rsa_reset(struct uart_8250_port *up)
> +{
> + if (up->port.type != PORT_RSA)
> + return;
> +
> + serial_out(up, UART_RSA_FRR, 0);
> +}
> +
> #ifdef CONFIG_SERIAL_8250_DEPRECATED_OPTIONS
> #ifndef MODULE
> /*
>
Powered by blists - more mailing lists