linux-kernel - Re: [PATCH 04/13] PCI: dwc: Refactor imx6 to use dw_pcie_clear_and_set

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aEnO4QSrAzEHzoAe@lizhi-Precision-Tower-5810>
Date: Wed, 11 Jun 2025 14:45:53 -0400
From: Frank Li <Frank.li@....com>
To: Hans Zhang <18255117159@....com>
Cc: lpieralisi@...nel.org, bhelgaas@...gle.com, mani@...nel.org,
	kwilczynski@...nel.org, robh@...nel.org, jingoohan1@...il.com,
	linux-pci@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 04/13] PCI: dwc: Refactor imx6 to use
 dw_pcie_clear_and_set_dword()

On Wed, Jun 11, 2025 at 02:38:14PM -0400, Frank Li wrote:
> On Thu, Jun 12, 2025 at 12:31:21AM +0800, Hans Zhang wrote:
>
> Subject should be
>
> PCI: dwc: imx6: Refactor code by using dw_pcie_clear_and_set_dword()
>
> tag "imx6:" should after "dwc:"
>
> Reviewed-by: Frank Li <Frank.Li@....com>

I sent out too quick, please don't applied my review tag at next version
because I found a issue, see:

https://lore.kernel.org/linux-pci/aEnONwJUSEMdMAUD@lizhi-Precision-Tower-5810/

Frank
>
> > i.MX6 PCIe driver contains multiple read-modify-write sequences for
> > link training and speed configuration. These operations manually handle
> > bit masking and shifting to update specific fields in control registers,
> > particularly for link capabilities and speed change initiation.
> >
> > Refactor link capability configuration and speed change handling using
> > dw_pcie_clear_and_set_dword(). The helper simplifies LNKCAP modification
> > by encapsulating bit clear/set operations and eliminates intermediate
> > variables. For speed change control, replace explicit bit manipulation
> > with direct register updates through the helper.
> >
> > Adopting the standard interface reduces code complexity in link training
> > paths and ensures consistent handling of speed-related bits. The change
> > also prepares the driver for future enhancements to Gen3 link training
> > by centralizing bit manipulation logic.
> >
> > Signed-off-by: Hans Zhang <18255117159@....com>
> > ---
> >  drivers/pci/controller/dwc/pci-imx6.c | 26 ++++++++++----------------
> >  1 file changed, 10 insertions(+), 16 deletions(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pci-imx6.c b/drivers/pci/controller/dwc/pci-imx6.c
> > index 5a38cfaf989b..3004e432f013 100644
> > --- a/drivers/pci/controller/dwc/pci-imx6.c
> > +++ b/drivers/pci/controller/dwc/pci-imx6.c
> > @@ -941,7 +941,6 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
> >  	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
> >  	struct device *dev = pci->dev;
> >  	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
> > -	u32 tmp;
> >  	int ret;
> >
> >  	if (!(imx_pcie->drvdata->flags &
> > @@ -956,10 +955,9 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
> >  	 * bus will not be detected at all.  This happens with PCIe switches.
> >  	 */
> >  	dw_pcie_dbi_ro_wr_en(pci);
> > -	tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> > -	tmp &= ~PCI_EXP_LNKCAP_SLS;
> > -	tmp |= PCI_EXP_LNKCAP_SLS_2_5GB;
> > -	dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
> > +	dw_pcie_clear_and_set_dword(pci, offset + PCI_EXP_LNKCAP,
> > +				    PCI_EXP_LNKCAP_SLS,
> > +				    PCI_EXP_LNKCAP_SLS_2_5GB);
> >  	dw_pcie_dbi_ro_wr_dis(pci);
> >
> >  	/* Start LTSSM. */
> > @@ -972,18 +970,16 @@ static int imx_pcie_start_link(struct dw_pcie *pci)
> >
> >  		/* Allow faster modes after the link is up */
> >  		dw_pcie_dbi_ro_wr_en(pci);
> > -		tmp = dw_pcie_readl_dbi(pci, offset + PCI_EXP_LNKCAP);
> > -		tmp &= ~PCI_EXP_LNKCAP_SLS;
> > -		tmp |= pci->max_link_speed;
> > -		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, tmp);
> > +		dw_pcie_clear_and_set_dword(pci, offset + PCI_EXP_LNKCAP,
> > +					    PCI_EXP_LNKCAP_SLS,
> > +					    pci->max_link_speed);
> >
> >  		/*
> >  		 * Start Directed Speed Change so the best possible
> >  		 * speed both link partners support can be negotiated.
> >  		 */
> > -		tmp = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
> > -		tmp |= PORT_LOGIC_SPEED_CHANGE;
> > -		dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, tmp);
> > +		dw_pcie_clear_and_set_dword(pci, PCIE_LINK_WIDTH_SPEED_CONTROL,
> > +					    0, PORT_LOGIC_SPEED_CHANGE);
> >  		dw_pcie_dbi_ro_wr_dis(pci);
> >
> >  		ret = imx_pcie_wait_for_speed_change(imx_pcie);
> > @@ -1295,7 +1291,6 @@ static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
> >  {
> >  	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> >  	struct imx_pcie *imx_pcie = to_imx_pcie(pci);
> > -	u32 val;
> >
> >  	if (imx_pcie->drvdata->flags & IMX_PCIE_FLAG_8GT_ECN_ERR051586) {
> >  		/*
> > @@ -1310,9 +1305,8 @@ static void imx_pcie_host_post_init(struct dw_pcie_rp *pp)
> >  		 * to 0.
> >  		 */
> >  		dw_pcie_dbi_ro_wr_en(pci);
> > -		val = dw_pcie_readl_dbi(pci, GEN3_RELATED_OFF);
> > -		val &= ~GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL;
> > -		dw_pcie_writel_dbi(pci, GEN3_RELATED_OFF, val);
> > +		dw_pcie_clear_and_set_dword(pci, GEN3_RELATED_OFF,
> > +					    GEN3_RELATED_OFF_GEN3_ZRXDC_NONCOMPL, 0);
> >  		dw_pcie_dbi_ro_wr_dis(pci);
> >  	}
> >  }
> > --
> > 2.25.1
> >