Message-ID: <aEn1o8tkXmqMwd5k@lizhi-Precision-Tower-5810>
Date: Wed, 11 Jun 2025 17:31:15 -0400
From: Frank Li <Frank.li@....com>
To: samuel.kayode@...oirfairelinux.com
Cc: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>,
	Krzysztof Kozlowski <krzk+dt@...nel.org>,
	Conor Dooley <conor+dt@...nel.org>,
	Liam Girdwood <lgirdwood@...il.com>,
	Mark Brown <broonie@...nel.org>,
	Dmitry Torokhov <dmitry.torokhov@...il.com>,
	Sebastian Reichel <sre@...nel.org>, imx@...ts.linux.dev,
	devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
	linux-input@...r.kernel.org, linux-pm@...r.kernel.org,
	Abel Vesa <abelvesa@...nel.org>, Abel Vesa <abelvesa@...ux.com>,
	Robin Gong <b38343@...escale.com>, Robin Gong <yibin.gong@....com>,
	Enric Balletbo i Serra <eballetbo@...il.com>
Subject: Re: [PATCH v6 3/6] regulator: pf1550: add support for regulator

On Wed, Jun 11, 2025 at 04:03:00PM -0400, Samuel Kayode via B4 Relay wrote:
> From: Samuel Kayode <samuel.kayode@...oirfairelinux.com>
>
> Add regulator support for the pf1550 PMIC.
>
> Reviewed-by: Mark Brown <broonie@...nel.org>
> Signed-off-by: Samuel Kayode <samuel.kayode@...oirfairelinux.com>

Reviewed-by: Frank Li <Frank.Li@....com>

> ---
> v6:
> - Use dvs_enb variable in pf1550_dev as suggested by Frank Li
> v5:
> - Address Mark's feedback:
>   - Add comments to clarify difference in interrupts
>   - Issue warn event for _LS(low side) interrupt
>   - Validate maximum ramp_delay
> v4:
> - Address Mark's feedback:
>   - Use C++ comments for SPDX license
>   - Add portions copyright to reflect my update
>   - Validate ramp_delay
>   - Report overcurrent and temperature events
> - Use platform_get_irq
> v3:
> - Drop duplicate include
> - Drop unnecessary includes
> - Accept lower case regulator names from devicetree
> - Use virqs mapped in core MFD driver
> v2:
> - Add driver for regulator
> ---
>  drivers/regulator/Kconfig            |   9 +
>  drivers/regulator/Makefile           |   1 +
>  drivers/regulator/pf1550-regulator.c | 362 +++++++++++++++++++++++++++++++++++
>  3 files changed, 372 insertions(+)
>
> diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
> index 6d8988387da4599633ca9bde2698b9711e34a245..de455887f9aeeada5546e44b8dc9d7ed041618a6 100644
> --- a/drivers/regulator/Kconfig
> +++ b/drivers/regulator/Kconfig
> @@ -1049,6 +1049,15 @@ config REGULATOR_PV88090
>  	  Say y here to support the voltage regulators and convertors
>  	  on PV88090
>
> +config REGULATOR_PF1550
> +	tristate "NXP PF1550 regulator"
> +	depends on MFD_PF1550
> +	help
> +	  Say y here to select this option to enable the regulators on
> +	  the PF1550 PMICs.
> +	  This driver controls the PF1550 regulators via I2C bus.
> +	  The regulators include three bucks and three ldos.
> +
>  config REGULATOR_PWM
>  	tristate "PWM voltage regulator"
>  	depends on PWM
> diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
> index c0bc7a0f4e67098c50ac3cf887ae95f46b2eac44..891174b511fc0653bac662c71659498122e8441f 100644
> --- a/drivers/regulator/Makefile
> +++ b/drivers/regulator/Makefile
> @@ -125,6 +125,7 @@ obj-$(CONFIG_REGULATOR_QCOM_USB_VBUS) += qcom_usb_vbus-regulator.o
>  obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o
>  obj-$(CONFIG_REGULATOR_PCA9450) += pca9450-regulator.o
>  obj-$(CONFIG_REGULATOR_PF9453) += pf9453-regulator.o
> +obj-$(CONFIG_REGULATOR_PF1550) += pf1550-regulator.o
>  obj-$(CONFIG_REGULATOR_PF8X00) += pf8x00-regulator.o
>  obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o
>  obj-$(CONFIG_REGULATOR_PV88060) += pv88060-regulator.o
> diff --git a/drivers/regulator/pf1550-regulator.c b/drivers/regulator/pf1550-regulator.c
> new file mode 100644
> index 0000000000000000000000000000000000000000..af448a5188640239cf446576d3133c59ebdb7307
> --- /dev/null
> +++ b/drivers/regulator/pf1550-regulator.c
> @@ -0,0 +1,362 @@
> +// SPDX-License-Identifier: GPL-2.0
> +//
> +// pf1550.c - regulator driver for the PF1550
> +//
> +// Copyright (C) 2016 Freescale Semiconductor, Inc.
> +// Robin Gong <yibin.gong@...escale.com>
> +//
> +// Portions Copyright (c) 2025 Savoir-faire Linux Inc.
> +// Samuel Kayode <samuel.kayode@...oirfairelinux.com>
> +//
> +// This driver is based on pfuze100-regulator.c
> +//
> +
> +#include <linux/err.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/pf1550.h>
> +#include <linux/module.h>
> +#include <linux/platform_device.h>
> +#include <linux/regulator/driver.h>
> +#include <linux/regulator/machine.h>
> +
> +#define PF1550_REGULATOR_IRQ_NR		11
> +#define PF1550_MAX_REGULATOR		7
> +
> +struct pf1550_desc {
> +	struct regulator_desc desc;
> +	unsigned char stby_reg;
> +	unsigned char stby_mask;
> +};
> +
> +struct pf1550_regulator_info {
> +	struct device *dev;
> +	const struct pf1550_dev *pf1550;
> +	struct pf1550_desc regulator_descs[PF1550_MAX_REGULATOR];
> +	struct regulator_dev *rdevs[PF1550_MAX_REGULATOR];
> +};
> +
> +static const int pf1550_sw12_volts[] = {
> +	1100000, 1200000, 1350000, 1500000, 1800000, 2500000, 3000000, 3300000,
> +};
> +
> +static const int pf1550_ldo13_volts[] = {
> +	750000, 800000, 850000, 900000, 950000, 1000000, 1050000, 1100000,
> +	1150000, 1200000, 1250000, 1300000, 1350000, 1400000, 1450000, 1500000,
> +	1800000, 1900000, 2000000, 2100000, 2200000, 2300000, 2400000, 2500000,
> +	2600000, 2700000, 2800000, 2900000, 3000000, 3100000, 3200000, 3300000,
> +};
> +
> +static int pf1550_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay)
> +{
> +	int id = rdev_get_id(rdev);
> +	unsigned int ramp_bits = 0;
> +	int ret;
> +
> +	if (id > PF1550_VREFDDR)
> +		return -EACCES;
> +
> +	if (ramp_delay < 0 || ramp_delay > 6250)
> +		return -EINVAL;
> +
> +	ramp_delay = 6250 / ramp_delay;
> +	ramp_bits = ramp_delay >> 1;
> +
> +	ret = regmap_update_bits(rdev->regmap, rdev->desc->vsel_reg + 4, 0x10,
> +				 ramp_bits << 4);
> +	if (ret < 0)
> +		dev_err(&rdev->dev, "ramp failed, err %d\n", ret);
> +
> +	return ret;
> +}
> +
> +static const struct regulator_ops pf1550_sw1_ops = {
> +	.list_voltage = regulator_list_voltage_table,
> +	.set_voltage_sel = regulator_set_voltage_sel_regmap,
> +	.get_voltage_sel = regulator_get_voltage_sel_regmap,
> +	.set_voltage_time_sel = regulator_set_voltage_time_sel,
> +	.set_ramp_delay = pf1550_set_ramp_delay,
> +};
> +
> +static const struct regulator_ops pf1550_sw2_ops = {
> +	.list_voltage = regulator_list_voltage_linear,
> +	.set_voltage_sel = regulator_set_voltage_sel_regmap,
> +	.get_voltage_sel = regulator_get_voltage_sel_regmap,
> +	.set_voltage_time_sel = regulator_set_voltage_time_sel,
> +	.set_ramp_delay = pf1550_set_ramp_delay,
> +};
> +
> +static const struct regulator_ops pf1550_ldo1_ops = {
> +	.enable = regulator_enable_regmap,
> +	.disable = regulator_disable_regmap,
> +	.is_enabled = regulator_is_enabled_regmap,
> +	.list_voltage = regulator_list_voltage_table,
> +	.map_voltage = regulator_map_voltage_ascend,
> +	.set_voltage_sel = regulator_set_voltage_sel_regmap,
> +	.get_voltage_sel = regulator_get_voltage_sel_regmap,
> +};
> +
> +static const struct regulator_ops pf1550_ldo2_ops = {
> +	.enable = regulator_enable_regmap,
> +	.disable = regulator_disable_regmap,
> +	.is_enabled = regulator_is_enabled_regmap,
> +	.list_voltage = regulator_list_voltage_linear,
> +	.set_voltage_sel = regulator_set_voltage_sel_regmap,
> +	.get_voltage_sel = regulator_get_voltage_sel_regmap,
> +};
> +
> +static const struct regulator_ops pf1550_fixed_ops = {
> +	.enable = regulator_enable_regmap,
> +	.disable = regulator_disable_regmap,
> +	.is_enabled = regulator_is_enabled_regmap,
> +	.list_voltage = regulator_list_voltage_linear,
> +};
> +
> +#define PF_VREF(_chip, match, _name, voltage)	{	\
> +	.desc = {	\
> +		.name = #_name,	\
> +		.of_match = of_match_ptr(match),	\
> +		.regulators_node = of_match_ptr("regulators"),	\
> +		.n_voltages = 1,	\
> +		.ops = &pf1550_fixed_ops,	\
> +		.type = REGULATOR_VOLTAGE,	\
> +		.id = _chip ## _ ## _name,	\
> +		.owner = THIS_MODULE,	\
> +		.min_uV = (voltage),	\
> +		.enable_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +		.enable_mask = 0x1,	\
> +	},	\
> +	.stby_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +	.stby_mask = 0x2,	\
> +}
> +
> +#define PF_SW1(_chip, match, _name, mask, voltages)	{	\
> +	.desc = {	\
> +		.name = #_name,	\
> +		.of_match = of_match_ptr(match),	\
> +		.regulators_node = of_match_ptr("regulators"),	\
> +		.n_voltages = ARRAY_SIZE(voltages),	\
> +		.ops = &pf1550_sw1_ops,	\
> +		.type = REGULATOR_VOLTAGE,	\
> +		.id = _chip ## _ ## _name,	\
> +		.owner = THIS_MODULE,	\
> +		.volt_table = voltages,	\
> +		.vsel_reg = _chip ## _PMIC_REG_ ## _name ## _VOLT, \
> +		.vsel_mask = (mask),	\
> +	},	\
> +	.stby_reg = _chip ## _PMIC_REG_ ## _name ## _STBY_VOLT,	\
> +	.stby_mask = (mask),	\
> +}
> +
> +#define PF_SW3(_chip, match, _name, min, max, mask, step)	{	\
> +	.desc = {	\
> +		.name = #_name,	\
> +		.of_match = of_match_ptr(match),	\
> +		.regulators_node = of_match_ptr("regulators"),	\
> +		.n_voltages = ((max) - (min)) / (step) + 1,	\
> +		.ops = &pf1550_sw2_ops,	\
> +		.type = REGULATOR_VOLTAGE,	\
> +		.id = _chip ## _ ## _name,	\
> +		.owner = THIS_MODULE,	\
> +		.min_uV = (min),	\
> +		.uV_step = (step),	\
> +		.vsel_reg = _chip ## _PMIC_REG_ ## _name ## _VOLT, \
> +		.vsel_mask = (mask),	\
> +	},	\
> +	.stby_reg = _chip ## _PMIC_REG_ ## _name ## _STBY_VOLT,	\
> +	.stby_mask = (mask),	\
> +}
> +
> +#define PF_LDO1(_chip, match, _name, mask, voltages)	{	\
> +	.desc = {	\
> +		.name = #_name,	\
> +		.of_match = of_match_ptr(match),	\
> +		.regulators_node = of_match_ptr("regulators"),	\
> +		.n_voltages = ARRAY_SIZE(voltages),	\
> +		.ops = &pf1550_ldo1_ops,	\
> +		.type = REGULATOR_VOLTAGE,	\
> +		.id = _chip ## _ ## _name,	\
> +		.owner = THIS_MODULE,	\
> +		.volt_table = voltages, \
> +		.vsel_reg = _chip ## _PMIC_REG_ ## _name ## _VOLT, \
> +		.vsel_mask = (mask),	\
> +		.enable_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +		.enable_mask = 0x1,	\
> +	},	\
> +	.stby_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +	.stby_mask = 0x2,	\
> +}
> +
> +#define PF_LDO2(_chip, match, _name, mask, min, max, step)	{	\
> +	.desc = {	\
> +		.name = #_name,	\
> +		.of_match = of_match_ptr(match),	\
> +		.regulators_node = of_match_ptr("regulators"),	\
> +		.n_voltages = ((max) - (min)) / (step) + 1,	\
> +		.ops = &pf1550_ldo2_ops,	\
> +		.type = REGULATOR_VOLTAGE,	\
> +		.id = _chip ## _ ## _name,	\
> +		.owner = THIS_MODULE,	\
> +		.min_uV = (min),	\
> +		.uV_step = (step),	\
> +		.vsel_reg = _chip ## _PMIC_REG_ ## _name ## _VOLT, \
> +		.vsel_mask = (mask),	\
> +		.enable_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +		.enable_mask = 0x1,	\
> +	},	\
> +	.stby_reg = _chip ## _PMIC_REG_ ## _name ## _CTRL, \
> +	.stby_mask = 0x2,	\
> +}
> +
> +static struct pf1550_desc pf1550_regulators[] = {
> +	PF_SW3(PF1550, "sw1", SW1, 600000, 1387500, 0x3f, 12500),
> +	PF_SW3(PF1550, "sw2", SW2, 600000, 1387500, 0x3f, 12500),
> +	PF_SW3(PF1550, "sw3", SW3, 1800000, 3300000, 0xf, 100000),
> +	PF_VREF(PF1550, "vrefddr", VREFDDR, 1200000),
> +	PF_LDO1(PF1550, "ldo1", LDO1, 0x1f, pf1550_ldo13_volts),
> +	PF_LDO2(PF1550, "ldo2", LDO2, 0xf, 1800000, 3300000, 100000),
> +	PF_LDO1(PF1550, "ldo3", LDO3, 0x1f, pf1550_ldo13_volts),
> +};
> +
> +static irqreturn_t pf1550_regulator_irq_handler(int irq, void *data)
> +{
> +	struct pf1550_regulator_info *info = data;
> +	struct device *dev = info->dev;
> +	struct platform_device *pdev = to_platform_device(dev);
> +	int i, irq_type = -1;
> +	unsigned int event;
> +
> +	for (i = 0; i < PF1550_REGULATOR_IRQ_NR; i++)
> +		if (irq == platform_get_irq(pdev, i))
> +			irq_type = i;
> +
> +	switch (irq_type) {
> +	/* The _LS interrupts indicate over-current event. The _HS interrupts
> +	 * which are more accurate and can detect catastrophic faults, issue
> +	 * an error event. The current limit FAULT interrupt is similar to the
> +	 * _HS'
> +	 */
> +	case PF1550_PMIC_IRQ_SW1_LS:
> +	case PF1550_PMIC_IRQ_SW2_LS:
> +	case PF1550_PMIC_IRQ_SW3_LS:
> +		event = REGULATOR_EVENT_OVER_CURRENT_WARN;
> +		for (i = 0; i < PF1550_MAX_REGULATOR; i++)
> +			if (!strcmp(rdev_get_name(info->rdevs[i]), "SW3"))
> +				regulator_notifier_call_chain(info->rdevs[i],
> +							      event, NULL);
> +		break;
> +	case PF1550_PMIC_IRQ_SW1_HS:
> +	case PF1550_PMIC_IRQ_SW2_HS:
> +	case PF1550_PMIC_IRQ_SW3_HS:
> +		event = REGULATOR_EVENT_OVER_CURRENT;
> +		for (i = 0; i < PF1550_MAX_REGULATOR; i++)
> +			if (!strcmp(rdev_get_name(info->rdevs[i]), "SW3"))
> +				regulator_notifier_call_chain(info->rdevs[i],
> +							      event, NULL);
> +		break;
> +	case PF1550_PMIC_IRQ_LDO1_FAULT:
> +	case PF1550_PMIC_IRQ_LDO2_FAULT:
> +	case PF1550_PMIC_IRQ_LDO3_FAULT:
> +		event = REGULATOR_EVENT_OVER_CURRENT;
> +		for (i = 0; i < PF1550_MAX_REGULATOR; i++)
> +			if (!strcmp(rdev_get_name(info->rdevs[i]), "LDO3"))
> +				regulator_notifier_call_chain(info->rdevs[i],
> +							      event, NULL);
> +		break;
> +	case PF1550_PMIC_IRQ_TEMP_110:
> +	case PF1550_PMIC_IRQ_TEMP_125:
> +		event = REGULATOR_EVENT_OVER_TEMP;
> +		for (i = 0; i < PF1550_MAX_REGULATOR; i++)
> +			regulator_notifier_call_chain(info->rdevs[i],
> +						      event, NULL);
> +		break;
> +	default:
> +		dev_err(dev, "regulator interrupt: irq %d occurred\n",
> +			irq_type);
> +	}
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int pf1550_regulator_probe(struct platform_device *pdev)
> +{
> +	const struct pf1550_dev *pf1550 = dev_get_drvdata(pdev->dev.parent);
> +	struct pf1550_regulator_info *info;
> +	int i, irq = -1, ret = 0;
> +	struct regulator_config config = { };
> +
> +	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
> +	if (!info)
> +		return -ENOMEM;
> +
> +	config.regmap = dev_get_regmap(pf1550->dev, NULL);
> +	if (!config.regmap)
> +		return dev_err_probe(&pdev->dev, -ENODEV,
> +				     "failed to get parent regmap\n");
> +
> +	config.dev = pf1550->dev;
> +	config.regmap = pf1550->regmap;
> +	info->dev = &pdev->dev;
> +	info->pf1550 = pf1550;
> +
> +	memcpy(info->regulator_descs, pf1550_regulators,
> +	       sizeof(info->regulator_descs));
> +
> +	for (i = 0; i < ARRAY_SIZE(pf1550_regulators); i++) {
> +		struct regulator_desc *desc;
> +
> +		desc = &info->regulator_descs[i].desc;
> +
> +		if (desc->id == PF1550_SW2 && pf1550->dvs_enb) {
> +			/* OTP_SW2_DVS_ENB == 1? */
> +			desc->volt_table = pf1550_sw12_volts;
> +			desc->n_voltages = ARRAY_SIZE(pf1550_sw12_volts);
> +			desc->ops = &pf1550_sw1_ops;
> +		}
> +
> +		info->rdevs[i] = devm_regulator_register(&pdev->dev, desc,
> +							 &config);
> +		if (IS_ERR(info->rdevs[i]))
> +			return dev_err_probe(&pdev->dev,
> +					     PTR_ERR(info->rdevs[i]),
> +					     "failed to initialize regulator-%d\n",
> +					     i);
> +	}
> +
> +	platform_set_drvdata(pdev, info);
> +
> +	for (i = 0; i < PF1550_REGULATOR_IRQ_NR; i++) {
> +		irq = platform_get_irq(pdev, i);
> +		if (irq < 0)
> +			return irq;
> +
> +		ret = devm_request_threaded_irq(&pdev->dev, irq, NULL,
> +						pf1550_regulator_irq_handler,
> +						IRQF_NO_SUSPEND,
> +						"pf1550-regulator", info);
> +		if (ret)
> +			return dev_err_probe(&pdev->dev, ret,
> +					     "failed: irq request (IRQ: %d)\n",
> +					     i);
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct platform_device_id pf1550_regulator_id[] = {
> +	{ "pf1550-regulator", 0 },
> +	{ /* sentinel */ }
> +};
> +MODULE_DEVICE_TABLE(platform, pf1550_regulator_id);
> +
> +static struct platform_driver pf1550_regulator_driver = {
> +	.driver = {
> +		   .name = "pf1550-regulator",
> +		   },
> +	.probe = pf1550_regulator_probe,
> +	.id_table = pf1550_regulator_id,
> +};
> +module_platform_driver(pf1550_regulator_driver);
> +
> +MODULE_DESCRIPTION("NXP PF1550 regulator driver");
> +MODULE_AUTHOR("Robin Gong <yibin.gong@...escale.com>");
> +MODULE_LICENSE("GPL");
>
> --
> 2.49.0
>
>

Powered by blists - more mailing lists