| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250611100319.186924-34-jirislaby@kernel.org>
Date: Wed, 11 Jun 2025 12:03:19 +0200
From: "Jiri Slaby (SUSE)" <jirislaby@...nel.org>
To: gregkh@...uxfoundation.org
Cc: linux-serial@...r.kernel.org,
linux-kernel@...r.kernel.org,
"Jiri Slaby (SUSE)" <jirislaby@...nel.org>
Subject: [PATCH 33/33] serial: 8250_omap: use uart_port pointer when available
There are unnecessary "up->port." accesses on many places in 8250_omap.
"port" is avalable on most places, so instead simply use "port->".
And make port available in omap8250_restore_regs() too. It's used on
many places in there.
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@...nel.org>
---
drivers/tty/serial/8250/8250_omap.c | 53 +++++++++++++++--------------
1 file changed, 27 insertions(+), 26 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 72ae08d6204f..6707f55bdbe7 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -176,7 +176,7 @@ static u32 uart_read(struct omap8250_priv *priv, u32 reg)
static void __omap8250_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
struct uart_8250_port *up = up_to_u8250p(port);
- struct omap8250_priv *priv = up->port.private_data;
+ struct omap8250_priv *priv = port->private_data;
u8 lcr;
serial8250_do_set_mctrl(port, mctrl);
@@ -303,12 +303,13 @@ static void omap8250_update_mdr1(struct uart_8250_port *up,
static void omap8250_restore_regs(struct uart_8250_port *up)
{
- struct omap8250_priv *priv = up->port.private_data;
+ struct uart_port *port = &up->port;
+ struct omap8250_priv *priv = port->private_data;
struct uart_8250_dma *dma = up->dma;
u8 mcr = serial8250_in_MCR(up);
/* Port locked to synchronize UART_IER access against the console. */
- lockdep_assert_held_once(&up->port.lock);
+ lockdep_assert_held_once(&port->lock);
if (dma && dma->tx_running) {
/*
@@ -359,12 +360,12 @@ static void omap8250_restore_regs(struct uart_8250_port *up)
omap8250_update_mdr1(up, priv);
- __omap8250_set_mctrl(&up->port, up->port.mctrl);
+ __omap8250_set_mctrl(port, port->mctrl);
serial_out(up, UART_OMAP_MDR3, priv->mdr3);
- if (up->port.rs485.flags & SER_RS485_ENABLED &&
- up->port.rs485_config == serial8250_em485_config)
+ if (port->rs485.flags & SER_RS485_ENABLED &&
+ port->rs485_config == serial8250_em485_config)
serial8250_em485_stop_tx(up, true);
}
@@ -377,7 +378,7 @@ static void omap_8250_set_termios(struct uart_port *port,
const struct ktermios *old)
{
struct uart_8250_port *up = up_to_u8250p(port);
- struct omap8250_priv *priv = up->port.private_data;
+ struct omap8250_priv *priv = port->private_data;
unsigned char cval = 0;
unsigned int baud;
@@ -418,39 +419,39 @@ static void omap_8250_set_termios(struct uart_port *port,
* ignoring of characters only occurs if the bit is set
* in @ignore_status_mask as well.
*/
- up->port.read_status_mask = UART_LSR_OE | UART_LSR_DR;
+ port->read_status_mask = UART_LSR_OE | UART_LSR_DR;
if (termios->c_iflag & INPCK)
- up->port.read_status_mask |= UART_LSR_FE | UART_LSR_PE;
+ port->read_status_mask |= UART_LSR_FE | UART_LSR_PE;
if (termios->c_iflag & (IGNBRK | PARMRK))
- up->port.read_status_mask |= UART_LSR_BI;
+ port->read_status_mask |= UART_LSR_BI;
/*
* Characters to ignore
*/
- up->port.ignore_status_mask = 0;
+ port->ignore_status_mask = 0;
if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
+ port->ignore_status_mask |= UART_LSR_PE | UART_LSR_FE;
if (termios->c_iflag & IGNBRK) {
- up->port.ignore_status_mask |= UART_LSR_BI;
+ port->ignore_status_mask |= UART_LSR_BI;
/*
* If we're ignoring parity and break indicators,
* ignore overruns too (for real raw support).
*/
if (termios->c_iflag & IGNPAR)
- up->port.ignore_status_mask |= UART_LSR_OE;
+ port->ignore_status_mask |= UART_LSR_OE;
}
/*
* ignore all characters if CREAD is not set
*/
if ((termios->c_cflag & CREAD) == 0)
- up->port.ignore_status_mask |= UART_LSR_DR;
+ port->ignore_status_mask |= UART_LSR_DR;
/*
* Modem status interrupts
*/
up->ier &= ~UART_IER_MSI;
- if (UART_ENABLE_MS(&up->port, termios->c_cflag))
+ if (UART_ENABLE_MS(port, termios->c_cflag))
up->ier |= UART_IER_MSI;
up->lcr = cval;
@@ -488,15 +489,15 @@ static void omap_8250_set_termios(struct uart_port *port,
priv->xoff = termios->c_cc[VSTOP];
priv->efr = 0;
- up->port.status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
+ port->status &= ~(UPSTAT_AUTOCTS | UPSTAT_AUTORTS | UPSTAT_AUTOXOFF);
- if (termios->c_cflag & CRTSCTS && up->port.flags & UPF_HARD_FLOW &&
+ if (termios->c_cflag & CRTSCTS && port->flags & UPF_HARD_FLOW &&
!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_RTS) &&
!mctrl_gpio_to_gpiod(up->gpios, UART_GPIO_CTS)) {
/* Enable AUTOCTS (autoRTS is enabled when RTS is raised) */
- up->port.status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
+ port->status |= UPSTAT_AUTOCTS | UPSTAT_AUTORTS;
priv->efr |= UART_EFR_CTS;
- } else if (up->port.flags & UPF_SOFT_FLOW) {
+ } else if (port->flags & UPF_SOFT_FLOW) {
/*
* OMAP rx s/w flow control is borked; the transmitter remains
* stuck off even if rx flow control is subsequently disabled
@@ -508,7 +509,7 @@ static void omap_8250_set_termios(struct uart_port *port,
* Transmit XON1, XOFF1
*/
if (termios->c_iflag & IXOFF) {
- up->port.status |= UPSTAT_AUTOXOFF;
+ port->status |= UPSTAT_AUTOXOFF;
priv->efr |= OMAP_UART_SW_TX;
}
}
@@ -770,7 +771,7 @@ static int omap_8250_startup(struct uart_port *port)
uart_port_unlock_irq(port);
}
- enable_irq(up->port.irq);
+ enable_irq(port->irq);
pm_runtime_mark_last_busy(port->dev);
pm_runtime_put_autosuspend(port->dev);
@@ -797,7 +798,7 @@ static void omap_8250_shutdown(struct uart_port *port)
up->ier = 0;
serial_out(up, UART_IER, 0);
uart_port_unlock_irq(port);
- disable_irq_nosync(up->port.irq);
+ disable_irq_nosync(port->irq);
dev_pm_clear_wake_irq(port->dev);
serial8250_release_dma(up);
@@ -1310,7 +1311,7 @@ static void am654_8250_handle_rx_dma(struct uart_8250_port *up, u8 iir,
static int omap_8250_dma_handle_irq(struct uart_port *port)
{
struct uart_8250_port *up = up_to_u8250p(port);
- struct omap8250_priv *priv = up->port.private_data;
+ struct omap8250_priv *priv = port->private_data;
u16 status;
u8 iir;
@@ -1332,8 +1333,8 @@ static int omap_8250_dma_handle_irq(struct uart_port *port)
serial8250_modem_status(up);
if (status & UART_LSR_THRE && up->dma->tx_err) {
- if (uart_tx_stopped(&up->port) ||
- kfifo_is_empty(&up->port.state->port.xmit_fifo)) {
+ if (uart_tx_stopped(port) ||
+ kfifo_is_empty(&port->state->port.xmit_fifo)) {
up->dma->tx_err = 0;
serial8250_tx_chars(up);
} else {
--
2.49.0
Powered by blists - more mailing lists