[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250611114336.2392320-4-s-vadapalli@ti.com>
Date: Wed, 11 Jun 2025 17:13:34 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
<s-vadapalli@...com>
Subject: [PATCH v2 3/5] arm64: dts: ti: k3-j7200: disable "mcu_cpsw" in SoC file and enable in board file
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j7200-mcu-wakeup.dtsi" and enable it in the board file
"k3-j7200-common-proc-board.dts".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v1 of this patch was 2 different patches which have currently been
squashed:
https://lore.kernel.org/r/20250529133443.1252293-9-s-vadapalli@ti.com/
https://lore.kernel.org/r/20250529133443.1252293-10-s-vadapalli@ti.com/
Squashing the patches is the only change since the v1 series, in
addition to updating the commit message accordingly.
Regards,
Siddharth.
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index f684ce6ad9ad..021cdeb84ad1 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -321,6 +321,7 @@ &wkup_gpio0 {
};
&mcu_cpsw {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
index 56ab144fea07..604295092d06 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j7200-mcu-wakeup.dtsi
@@ -432,6 +432,8 @@ mcu_cpsw: ethernet@...00000 {
"tx4", "tx5", "tx6", "tx7",
"rx";
+ status = "disabled";
+
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Powered by blists - more mailing lists