[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <20250611114336.2392320-5-s-vadapalli@ti.com>
Date: Wed, 11 Jun 2025 17:13:35 +0530
From: Siddharth Vadapalli <s-vadapalli@...com>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>, <srk@...com>,
<s-vadapalli@...com>
Subject: [PATCH v2 4/5] arm64: dts: ti: k3-j721e: disable "mcu_cpsw" in SoC file and enable it in board file
Following the existing convention of disabling nodes in the SoC file and
enabling only the required ones in the board file, disable "mcu_cpsw" node
in the SoC file "k3-j721e-mcu-wakeup.dtsi" and enable it in the board file
"k3-j721e-common-proc-board.dts".
Signed-off-by: Siddharth Vadapalli <s-vadapalli@...com>
---
v1 of this patch was 2 different patches which have currently been
squashed:
https://lore.kernel.org/r/20250529133443.1252293-11-s-vadapalli@ti.com/
https://lore.kernel.org/r/20250529133443.1252293-12-s-vadapalli@ti.com/
Squashing the patches is the only change since the v1 series, in
addition to updating the commit message accordingly.
Regards,
Siddharth.
arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts | 1 +
arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi | 2 ++
2 files changed, 3 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
index 45311438315f..eda85dafb794 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -767,6 +767,7 @@ exp5: gpio@20 {
};
&mcu_cpsw {
+ status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&mcu_cpsw_pins_default>, <&mcu_mdio_pins_default>;
};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
index b02142b2b460..dd923540ca0a 100644
--- a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -551,6 +551,8 @@ mcu_cpsw: ethernet@...00000 {
"tx4", "tx5", "tx6", "tx7",
"rx";
+ status = "disabled";
+
ethernet-ports {
#address-cells = <1>;
#size-cells = <0>;
--
2.34.1
Powered by blists - more mailing lists