linux-kernel - [PATCH v2] ARM: dts: aspeed: lanyang: Fix 'lable' typo in LED nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250612075057.80433-1-ankitchauhan2065@gmail.com>
Date: Thu, 12 Jun 2025 13:20:57 +0530
From: Ankit Chauhan <ankitchauhan2065@...il.com>
To: robh@...nel.org,
	krzk+dt@...nel.org,
	conor+dt@...nel.org,
	joel@....id.au,
	andrew@...econstruct.com.au
Cc: devicetree@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org,
	linux-aspeed@...ts.ozlabs.org,
	linux-kernel@...r.kernel.org,
	Ankit Chauhan <ankitchauhan2065@...il.com>
Subject: [PATCH v2] ARM: dts: aspeed: lanyang: Fix 'lable' typo in LED nodes

Fix an obvious spelling error in the DTS file for the Lanyang BMC
("lable" → "label"). This was reported by bugzilla a few years ago
but never got fixed.

Reported-by: Jens Schleusener <Jens.Schleusener@...sies.org>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=205891
Signed-off-by: Ankit Chauhan <ankitchauhan2065@...il.com>
---
V1 -> V2: Changed the subject prefix and addressed review comments from Andrew Jeffery
 arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
index 370738572a55..8b9d382241ff 100644
--- a/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
+++ b/arch/arm/boot/dts/aspeed/aspeed-bmc-opp-lanyang.dts
@@ -52,12 +52,12 @@ hdd_fault {
 			gpios = <&gpio ASPEED_GPIO(B, 3) GPIO_ACTIVE_HIGH>;
 		};
 		bmc_err {
-			lable = "BMC_fault";
+			label = "BMC_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 6) GPIO_ACTIVE_HIGH>;
 		};
 
 		sys_err {
-			lable = "Sys_fault";
+			label = "Sys_fault";
 			gpios = <&gpio ASPEED_GPIO(H, 7) GPIO_ACTIVE_HIGH>;
 		};
 	};
-- 
2.34.1