[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250613-hdp-upstream-v5-6-6fd6f0dc527c@foss.st.com>
Date: Fri, 13 Jun 2025 12:14:17 +0200
From: Clément Le Goffic <clement.legoffic@...s.st.com>
To: Linus Walleij <linus.walleij@...aro.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Maxime Coquelin <mcoquelin.stm32@...il.com>,
Alexandre Torgue
<alexandre.torgue@...s.st.com>,
Bartosz Golaszewski <brgl@...ev.pl>
CC: <linux-kernel@...r.kernel.org>, <linux-gpio@...r.kernel.org>,
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
Clément Le Goffic
<clement.legoffic@...s.st.com>
Subject: [PATCH v5 6/9] ARM: dts: stm32: add Hardware debug port (HDP) on
stm32mp15
Add the hdp devicetree node for stm32mp15 SoC family
Keep the node disabled as HDP needs the pinctrl SoC configuration to be
able to output its mux output signal outside of the SoC, on the SoC pad.
This configuration is provided in the board dtsi file through 'pinctrl-*'
properties as well as HDP mux configuration.
Thus, if needed, HDP should be enabled in board dtsi file.
Signed-off-by: Clément Le Goffic <clement.legoffic@...s.st.com>
---
arch/arm/boot/dts/st/stm32mp151.dtsi | 7 +++++++
1 file changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/st/stm32mp151.dtsi b/arch/arm/boot/dts/st/stm32mp151.dtsi
index 0daa8ffe2ff5..b1b568dfd126 100644
--- a/arch/arm/boot/dts/st/stm32mp151.dtsi
+++ b/arch/arm/boot/dts/st/stm32mp151.dtsi
@@ -270,6 +270,13 @@ dts: thermal@...28000 {
status = "disabled";
};
+ hdp: pinctrl@...2a000 {
+ compatible = "st,stm32mp151-hdp";
+ reg = <0x5002a000 0x400>;
+ clocks = <&rcc HDP>;
+ status = "disabled";
+ };
+
mdma1: dma-controller@...00000 {
compatible = "st,stm32h7-mdma";
reg = <0x58000000 0x1000>;
--
2.43.0
Powered by blists - more mailing lists