[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1749813627-8377-4-git-send-email-ernis@linux.microsoft.com>
Date: Fri, 13 Jun 2025 04:20:26 -0700
From: Erni Sri Satya Vennela <ernis@...ux.microsoft.com>
To: kys@...rosoft.com,
haiyangz@...rosoft.com,
wei.liu@...nel.org,
decui@...rosoft.com,
andrew+netdev@...n.ch,
davem@...emloft.net,
edumazet@...gle.com,
kuba@...nel.org,
pabeni@...hat.com,
longli@...rosoft.com,
kotaranov@...rosoft.com,
horms@...nel.org,
shirazsaleem@...rosoft.com,
leon@...nel.org,
ernis@...ux.microsoft.com,
shradhagupta@...ux.microsoft.com,
schakrabarti@...ux.microsoft.com,
gerhard@...leder-embedded.com,
rosenp@...il.com,
sdf@...ichev.me,
linux-hyperv@...r.kernel.org,
netdev@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-rdma@...r.kernel.org
Subject: [PATCH net-next v2 3/4] net: mana: Add speed support in mana_get_link_ksettings
Allow mana ethtool get_link_ksettings operation to report
the maximum speed supported by the SKU in mbps.
The driver retrieves this information by issuing a
HWC command to the hardware via mana_query_link_cfg(),
which retrieves the SKU's maximum supported speed.
These APIs when invoked on hardware that are older/do
not support these APIs, the speed would be reported as UNKNOWN.
Before:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: Unknown!
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
After:
$ethtool enP30832s1
> Settings for enP30832s1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 16000Mb/s
Duplex: Full
Auto-negotiation: off
Port: Other
PHYAD: 0
Transceiver: internal
Link detected: yes
Signed-off-by: Erni Sri Satya Vennela <ernis@...ux.microsoft.com>
Reviewed-by: Haiyang Zhang <haiyangz@...rosoft.com>
Reviewed-by: Shradha Gupta <shradhagupta@...ux.microsoft.com>
Reviewed-by: Saurabh Singh Sengar <ssengar@...ux.microsoft.com>
---
Changes in v2:
* No change.
---
drivers/net/ethernet/microsoft/mana/mana_en.c | 1 +
drivers/net/ethernet/microsoft/mana/mana_ethtool.c | 6 ++++++
include/net/mana/mana.h | 2 ++
3 files changed, 9 insertions(+)
diff --git a/drivers/net/ethernet/microsoft/mana/mana_en.c b/drivers/net/ethernet/microsoft/mana/mana_en.c
index 7e8bc2c6a194..54a86c233948 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_en.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_en.c
@@ -1272,6 +1272,7 @@ int mana_query_link_cfg(struct mana_port_context *apc)
return err;
}
apc->speed = resp.link_speed_mbps;
+ apc->max_speed = resp.qos_speed_mbps;
return 0;
}
diff --git a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
index 4fb3a04994a2..a1afa75a9463 100644
--- a/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
+++ b/drivers/net/ethernet/microsoft/mana/mana_ethtool.c
@@ -495,6 +495,12 @@ static int mana_set_ringparam(struct net_device *ndev,
static int mana_get_link_ksettings(struct net_device *ndev,
struct ethtool_link_ksettings *cmd)
{
+ struct mana_port_context *apc = netdev_priv(ndev);
+ int err;
+
+ err = mana_query_link_cfg(apc);
+ cmd->base.speed = (err) ? SPEED_UNKNOWN : apc->max_speed;
+
cmd->base.duplex = DUPLEX_FULL;
cmd->base.port = PORT_OTHER;
diff --git a/include/net/mana/mana.h b/include/net/mana/mana.h
index 038b18340e51..e1030a7d2daa 100644
--- a/include/net/mana/mana.h
+++ b/include/net/mana/mana.h
@@ -533,6 +533,8 @@ struct mana_port_context {
u16 port_idx;
/* Currently configured speed (mbps) */
u32 speed;
+ /* Maximum speed supported by the SKU (mbps) */
+ u32 max_speed;
bool port_is_up;
bool port_st_save; /* Saved port state */
--
2.34.1
Powered by blists - more mailing lists