[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250613132227-GYB135173@gentoo>
Date: Fri, 13 Jun 2025 13:22:27 +0000
From: Yixun Lan <dlan@...too.org>
To: Vivian Wang <uwu@...m.page>
Cc: Guodong Xu <guodong@...cstar.com>, vkoul@...nel.org, robh@...nel.org,
krzk+dt@...nel.org, conor+dt@...nel.org, paul.walmsley@...ive.com,
palmer@...belt.com, aou@...s.berkeley.edu, alex@...ti.fr,
p.zabel@...gutronix.de, drew@...7.com,
emil.renner.berthing@...onical.com, inochiama@...il.com,
geert+renesas@...der.be, tglx@...utronix.de,
hal.feng@...rfivetech.com, joel@....id.au, duje.mihanovic@...le.hr,
Ze Huang <huangze@...t.edu.cn>, elder@...cstar.com,
dmaengine@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
spacemit@...ts.linux.dev
Subject: Re: [PATCH 5/8] riscv: dts: spacemit: Add dma bus and PDMA node for
K1 SoC
Hi Vivian, Guodong,
On 11:06 Fri 13 Jun , Vivian Wang wrote:
> Hi Guodong,
>
> On 6/11/25 20:57, Guodong Xu wrote:
> > <snip>
> >
> > - status = "disabled";
> > + dma_bus: bus@4 {
> > + compatible = "simple-bus";
> > + #address-cells = <2>;
> > + #size-cells = <2>;
> > + dma-ranges = <0x0 0x00000000 0x0 0x00000000 0x0 0x80000000>,
> > + <0x1 0x00000000 0x1 0x80000000 0x3 0x00000000>;
> > + ranges;
> > };
>
> Can the addition of dma_bus and movement of nodes under it be extracted
> into a separate patch, and ideally, taken up by Yixun Lan without going
> through dmaengine? Not specifically "dram_range4", but all of these
> translations affects many devices on the SoC, including ethernet and
> USB3. See:
Right, we've had an offline discussion, and agreed on this - have *bus
patches separated and let other patches depend on it.
But seems Guodong failed to do this or just sent out an old version
of the PDMA patch?
>
> https://lore.kernel.org/all/20250526-b4-k1-dwc3-v3-v4-2-63e4e525e5cb@whut.edu.cn/
> https://lore.kernel.org/all/20250613-net-k1-emac-v1-0-cc6f9e510667@iscas.ac.cn/
>
> (I haven't put eth{0,1} under dma_bus5 because in 6.16-rc1 there is
> none, but ideally we should fix this.)
>
> DMA address translation does not depend on PDMA. It would be best if we
> get all the possible dma-ranges buses handled in one place, instead of
> everyone moving nodes around.
>
I agree
> @Ze Huang: This affects your "MBUS" changes as well. Please take a look,
> thanks.
>
> >
> > gpio: gpio@...19000 {
> > @@ -792,3 +693,124 @@ pwm19: pwm@...22c00 {
> > };
> > };
> > };
> > +
> > +&dma_bus {
> >
> > <snip>
>
--
Yixun Lan (dlan)
Powered by blists - more mailing lists