[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <6454c831-24e7-4b72-979c-7922092877ba@gmail.com>
Date: Tue, 17 Jun 2025 08:18:45 +0200
From: Christian Lamparter <chunkeey@...il.com>
To: Dmitry Antipov <dmantipov@...dex.ru>
Cc: Fedor Pchelkin <pchelkin@...ras.ru>, linux-wireless@...r.kernel.org,
linux-kernel@...r.kernel.org, Jeff Johnson <quic_jjohnson@...cinc.com>
Subject: Re: [PATCH v2] wifi: carl9170: do not ping device which has failed to
load firmware
On 6/16/25 8:12 PM, Dmitry Antipov wrote:
> Syzkaller reports [1, 2] crashes caused by an attempts to ping
> the device which has failed to load firmware. Since such a device
> doesn't pass 'ieee80211_register_hw()', an internal workqueue
> managed by 'ieee80211_queue_work()' is not yet created and an
> attempt to queue work on it causes null-ptr-deref.
>
> [1] https://syzkaller.appspot.com/bug?extid=9a4aec827829942045ff
> [2] https://syzkaller.appspot.com/bug?extid=0d8afba53e8fb2633217
> Fixes: e4a668c59080 ("carl9170: fix spurious restart due to high latency")
> Signed-off-by: Dmitry Antipov <dmantipov@...dex.ru>
Acked-by: Christian Lamparter <chunkeey@...il.com>
Cc: <stable@...r.kernel.org>
> ---
> v2: prefer pr_warn_once() over WARN_ON_ONCE()
> ---
> drivers/net/wireless/ath/carl9170/usb.c | 19 +++++++++++++------
> 1 file changed, 13 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/net/wireless/ath/carl9170/usb.c b/drivers/net/wireless/ath/carl9170/usb.c
> index a3e03580cd9f..564ca6a61985 100644
> --- a/drivers/net/wireless/ath/carl9170/usb.c
> +++ b/drivers/net/wireless/ath/carl9170/usb.c
> @@ -438,14 +438,21 @@ static void carl9170_usb_rx_complete(struct urb *urb)
>
> if (atomic_read(&ar->rx_anch_urbs) == 0) {
> /*
> - * The system is too slow to cope with
> - * the enormous workload. We have simply
> - * run out of active rx urbs and this
> - * unfortunately leads to an unpredictable
> - * device.
> + * At this point, either the system is too slow to
> + * cope with the enormous workload (so we have simply
> + * run out of active rx urbs and this unfortunately
> + * leads to an unpredictable device), or the device
> + * is not fully functional after an unsuccessful
> + * firmware loading attempts (so it doesn't pass
> + * ieee80211_register_hw() and there is no internal
> + * workqueue at all).
> */
>
> - ieee80211_queue_work(ar->hw, &ar->ping_work);
> + if (ar->registered)
> + ieee80211_queue_work(ar->hw, &ar->ping_work);
> + else
> + pr_warn_once("device %s is not registered\n",
> + dev_name(&ar->udev->dev));
> }
> } else {
> /*
Powered by blists - more mailing lists