linux-kernel - Re: [PATCH v2 3/5] PCI: dwc: Don't poll L2 if QUIRK_NOL2POLL_IN

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <aFMGMajYTT9F6Htb@lizhi-Precision-Tower-5810>
Date: Wed, 18 Jun 2025 14:32:17 -0400
From: Frank Li <Frank.li@....com>
To: Richard Zhu <hongxing.zhu@....com>
Cc: l.stach@...gutronix.de, lpieralisi@...nel.org, kwilczynski@...nel.org,
	mani@...nel.org, robh@...nel.org, bhelgaas@...gle.com,
	shawnguo@...nel.org, s.hauer@...gutronix.de, kernel@...gutronix.de,
	festevam@...il.com, linux-pci@...r.kernel.org,
	linux-arm-kernel@...ts.infradead.org, imx@...ts.linux.dev,
	linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 3/5] PCI: dwc: Don't poll L2 if QUIRK_NOL2POLL_IN_PM
 is existing in suspend

On Wed, Jun 18, 2025 at 10:41:14AM +0800, Richard Zhu wrote:
> Refer to PCIe r6.0, sec 5.2, fig 5-1 Link Power Management State Flow
> Diagram. Both L0 and L2/L3 Ready can be transferred to LDn directly.
>
> It's harmless to let dw_pcie_suspend_noirq() proceed suspend after the
> PME_Turn_Off is sent out, whatever the LTSSM state is in L2 or L3 after
> a recommended 10ms max wait refer to PCIe r6.0, sec 5.3.3.2.1 PME
> Synchronization.
>
> The LTSSM states are inaccessible on i.MX6QP, and i.MX7D after the
                                              ^ needn't ,
> PME_Turn_Off is sent out.
>
> To handle this case, don't poll L2 state and add one max 10ms delay if
> QUIRK_NOL2POLL_IN_PM flag is existing in suspend.

To support this case, don't poll L2 state and apply a simple delay of
PCIE_PME_TO_L2_TIMEOUT_US(10ms) if the QUIRK_NOL2POLL_IN_PM flag is set in
suspend.

Reviewed-by: Frank Li <Frank.Li@....com>

>
> Signed-off-by: Richard Zhu <hongxing.zhu@....com>
> ---
>  .../pci/controller/dwc/pcie-designware-host.c | 31 +++++++++++++------
>  drivers/pci/controller/dwc/pcie-designware.h  |  4 +++
>  2 files changed, 25 insertions(+), 10 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-host.c b/drivers/pci/controller/dwc/pcie-designware-host.c
> index 906277f9ffaf..2d58a3eb94a1 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-host.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-host.c
> @@ -1026,7 +1026,7 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
>  {
>  	u8 offset = dw_pcie_find_capability(pci, PCI_CAP_ID_EXP);
>  	u32 val;
> -	int ret;
> +	int ret = 0;
>
>  	/*
>  	 * If L1SS is supported, then do not put the link into L2 as some
> @@ -1043,15 +1043,26 @@ int dw_pcie_suspend_noirq(struct dw_pcie *pci)
>  			return ret;
>  	}
>
> -	ret = read_poll_timeout(dw_pcie_get_ltssm, val,
> -				val == DW_PCIE_LTSSM_L2_IDLE ||
> -				val <= DW_PCIE_LTSSM_DETECT_WAIT,
> -				PCIE_PME_TO_L2_TIMEOUT_US/10,
> -				PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> -	if (ret) {
> -		/* Only log message when LTSSM isn't in DETECT or POLL */
> -		dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> -		return ret;
> +	if (dwc_quirk(pci, QUIRK_NOL2POLL_IN_PM)) {
> +		/*
> +		 * Refer to PCIe r6.0, sec 5.2, fig 5-1 Link Power Management
> +		 * State Flow Diagram. Both L0 and L2/L3 Ready can be
> +		 * transferred to LDn directly. On the LTSSM states poll broken
> +		 * platforms, add a max 10ms delay refer to PCIe r6.0,
> +		 * sec 5.3.3.2.1 PME Synchronization.
> +		 */
> +		mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +	} else {
> +		ret = read_poll_timeout(dw_pcie_get_ltssm, val,
> +					val == DW_PCIE_LTSSM_L2_IDLE ||
> +					val <= DW_PCIE_LTSSM_DETECT_WAIT,
> +					PCIE_PME_TO_L2_TIMEOUT_US/10,
> +					PCIE_PME_TO_L2_TIMEOUT_US, false, pci);
> +		if (ret) {
> +			/* Only log message when LTSSM isn't in DETECT or POLL */
> +			dev_err(pci->dev, "Timeout waiting for L2 entry! LTSSM: 0x%x\n", val);
> +			return ret;
> +		}
>  	}
>
>  	/*
> diff --git a/drivers/pci/controller/dwc/pcie-designware.h b/drivers/pci/controller/dwc/pcie-designware.h
> index ce9e18554e42..e35b19cbd8bf 100644
> --- a/drivers/pci/controller/dwc/pcie-designware.h
> +++ b/drivers/pci/controller/dwc/pcie-designware.h
> @@ -299,6 +299,9 @@
>  /* Default eDMA LLP memory size */
>  #define DMA_LLP_MEM_SIZE		PAGE_SIZE
>
> +#define QUIRK_NOL2POLL_IN_PM		BIT(0)
> +#define dwc_quirk(pci, val)		(pci->quirk_flag & val)
> +
>  struct dw_pcie;
>  struct dw_pcie_rp;
>  struct dw_pcie_ep;
> @@ -509,6 +512,7 @@ struct dw_pcie {
>  	const struct dw_pcie_ops *ops;
>  	u32			version;
>  	u32			type;
> +	u32			quirk_flag;
>  	unsigned long		caps;
>  	int			num_lanes;
>  	int			max_link_speed;
> --
> 2.37.1
>