[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <000001dbdfaa$b605f640$2211e2c0$@samsung.com>
Date: Tue, 17 Jun 2025 22:40:18 +0530
From: "Pritam Manohar Sutar" <pritam.sutar@...sung.com>
To: "'Neil Armstrong'" <neil.armstrong@...aro.org>, <vkoul@...nel.org>,
<kishon@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <alim.akhtar@...sung.com>,
<andre.draszik@...aro.org>, <peter.griffin@...aro.org>,
<kauschluss@...root.org>, <ivo.ivanov.ivanov1@...il.com>,
<m.szyprowski@...sung.com>, <s.nawrocki@...sung.com>
Cc: <linux-phy@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-samsung-soc@...r.kernel.org>, <rosa.pila@...sung.com>,
<dev.tailor@...sung.com>, <faraz.ata@...sung.com>,
<muhammed.ali@...sung.com>, <selvarasu.g@...sung.com>
Subject: RE: [PATCH v3 9/9] arm64: dts: exynos: ExynosAutov920: add USB and
USB SS combo phy nodes
Hi Neil,
> -----Original Message-----
> From: neil.armstrong@...aro.org <neil.armstrong@...aro.org>
> Sent: 13 June 2025 02:42 PM
> To: Pritam Manohar Sutar <pritam.sutar@...sung.com>; vkoul@...nel.org;
> kishon@...nel.org; robh@...nel.org; krzk+dt@...nel.org;
> conor+dt@...nel.org; alim.akhtar@...sung.com; andre.draszik@...aro.org;
> peter.griffin@...aro.org; kauschluss@...root.org;
> ivo.ivanov.ivanov1@...il.com; m.szyprowski@...sung.com;
> s.nawrocki@...sung.com
> Cc: linux-phy@...ts.infradead.org; devicetree@...r.kernel.org; linux-
> kernel@...r.kernel.org; linux-arm-kernel@...ts.infradead.org; linux-
> samsung-soc@...r.kernel.org; rosa.pila@...sung.com;
> dev.tailor@...sung.com; faraz.ata@...sung.com;
> muhammed.ali@...sung.com; selvarasu.g@...sung.com
> Subject: Re: [PATCH v3 9/9] arm64: dts: exynos: ExynosAutov920: add USB
> and USB SS combo phy nodes
>
> On 13/06/2025 07:56, Pritam Manohar Sutar wrote:
> > Update the USB 3.1 DRD controller and USB31DRD phy nodes to support SS
> > combo phy for this soc.
> >
> > The USB 3.1 DRD controller has the following features:
> > * DWC3 compatible
> > * compliant with both USB device 3.1 and USB device 2.0 standards
> > * compliant with USB host 3.1 and USB host 2.0 standards
> > * supports USB device 3.1 and USB device 2.0 interfaces
> > * supports USB host 3.1 and USB host 2.0 interfaces
> > * full-speed (12 Mbps) and high-speed (480 Mbps) modes with USB device
> > 2.0 interface
> > * super-speed (5 Gbps) mode with USB device 3.1 Gen1 interface
> > * super-speed plus (10 Gbps) mode with USB device 3.1 Gen2 interface
> > * single USB port which can be used for USB 3.1 or USB 2.0
> > * on-chip USB PHY transceiver
> > * supports up to 16 bi-directional endpoints
> > * compliant with xHCI 1.1 specification
> >
> > USB3.1 SSP+(10Gbps) is supported in this commit and SS phy in combo
> > phy only supports PIPE3 interface and it is added in index 0 of SS phy.
> > UTMI+ and PIPE3 PHY interfaces are specified in "phys" property,
> > UTMI+ (index 0 HS phy) and PIPE3 (index 0 SS phy).
> >
> > Signed-off-by: Pritam Manohar Sutar <pritam.sutar@...sung.com>
> > ---
> > .../arm64/boot/dts/exynos/exynosautov920-sadk.dts | 4 ++++
> > arch/arm64/boot/dts/exynos/exynosautov920.dtsi | 15
> +++++++++++++--
> > 2 files changed, 17 insertions(+), 2 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> > b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> > index a21386bd9af3..40588f7c9998 100644
> > --- a/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> > +++ b/arch/arm64/boot/dts/exynos/exynosautov920-sadk.dts
> > @@ -88,6 +88,10 @@ &xtcxo {
> > };
> >
> > /* usb */
> > +&usbdrd31_ssphy {
> > + status = "okay";
> > +};
> > +
> > &usbdrd31_hsphy {
> > status = "okay";
> > };
> > diff --git a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> > b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> > index 4efc005cae80..5ee7fad346b9 100644
> > --- a/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> > +++ b/arch/arm64/boot/dts/exynos/exynosautov920.dtsi
> > @@ -1048,6 +1048,17 @@ pinctrl_hsi1: pinctrl@...50000 {
> > interrupts = <GIC_SPI 456 IRQ_TYPE_LEVEL_HIGH>;
> > };
> >
> > + usbdrd31_ssphy: phy@...80000 {
> > + compatible = "samsung,exynosautov920-usb31drd-
> ssphy";
> > + reg = <0x16480000 0x0200>;
> > + clocks = <&cmu_hsi1 CLK_MOUT_HSI1_NOC_USER>,
> > + <&cmu_hsi1 CLK_MOUT_HSI1_USBDRD>;
> > + clock-names = "phy", "ref";
> > + #phy-cells = <1>;
> > + samsung,pmu-syscon = <&pmu_system_controller>;
> > + status = "disabled";
> > + };
> > +
> > usbdrd31_hsphy: phy@...90000 {
> > compatible = "samsung,exynosautov920-usbdrd-
> hsphy";
> > reg = <0x16490000 0x0200>;
> > @@ -1109,8 +1120,8 @@ usbdrd31_dwc3: usb@0 {
> > <&cmu_hsi1
> CLK_MOUT_HSI1_USBDRD>;
> > clock-names = "ref", "susp_clk";
> > interrupts = <GIC_SPI 491
> IRQ_TYPE_LEVEL_HIGH>;
> > - phys = <&usbdrd31_hsphy 0>;
> > - phy-names = "usb2-phy";
> > + phys = <&usbdrd31_hsphy 0>,
> <&usbdrd31_ssphy 0>;
> > + phy-names = "usb2-phy", "usb3-phy";
> > snps,has-lpm-erratum;
> > snps,dis_u2_susphy_quirk;
> > snps,dis_u3_susphy_quirk;
>
> I think at least patch 6 & 9 should be squashed.
>
Patch 6 and 9 are posted to add support for HS and SS phys in combo phy separately.
We will squash them in next version of patch-set (v4).
> Neil
Thank you.
Regards,
Pritam
Powered by blists - more mailing lists