[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250619171025.3359384-3-wens@kernel.org>
Date: Fri, 20 Jun 2025 01:10:25 +0800
From: Chen-Yu Tsai <wens@...nel.org>
To: Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej@...nel.org>,
Samuel Holland <samuel@...lland.org>
Cc: Andre Przywara <andre.przywara@....com>,
Philipp Zabel <p.zabel@...gutronix.de>,
devicetree@...r.kernel.org,
linux-sunxi@...ts.linux.dev,
linux-clk@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org
Subject: [PATCH 2/2] clk: sunxi-ng: sun55i-a523-r-ccu: Add missing PPU0 reset
From: Chen-Yu Tsai <wens@...e.org>
There is a PPU0 reset control bit in the same register as the PPU1
reset control. This missing reset control is for the PCK-600 unit
in the SoC. Manual tests show that the reset control indeed exists,
and if not configured, the system will hang when the PCK-600 registers
are accessed.
Add a reset entry for it at the end of the existing ones.
Fixes: 8cea339cfb81 ("clk: sunxi-ng: add support for the A523/T527 PRCM CCU")
Signed-off-by: Chen-Yu Tsai <wens@...e.org>
---
drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c b/drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c
index b5464d8083c8..70ce0ca0cb7d 100644
--- a/drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c
+++ b/drivers/clk/sunxi-ng/ccu-sun55i-a523-r.c
@@ -204,6 +204,7 @@ static struct ccu_reset_map sun55i_a523_r_ccu_resets[] = {
[RST_BUS_R_IR_RX] = { 0x1cc, BIT(16) },
[RST_BUS_R_RTC] = { 0x20c, BIT(16) },
[RST_BUS_R_CPUCFG] = { 0x22c, BIT(16) },
+ [RST_BUS_R_PPU0] = { 0x1ac, BIT(16) },
};
static const struct sunxi_ccu_desc sun55i_a523_r_ccu_desc = {
--
2.39.5
Powered by blists - more mailing lists