linux-kernel - [PATCH 3/9] iio: adc: ad_sigma_delta: use BITS_TO

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250620-iio-adc-ad7173-add-spi-offload-support-v1-3-0766f6297430@baylibre.com>
Date: Fri, 20 Jun 2025 17:20:09 -0500
From: David Lechner <dlechner@...libre.com>
To: Michael Hennerich <Michael.Hennerich@...log.com>, 
 Jonathan Cameron <jic23@...nel.org>, 
 Nuno Sá <nuno.sa@...log.com>, 
 Andy Shevchenko <andy@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Mark Brown <broonie@...nel.org>
Cc: linux-iio@...r.kernel.org, linux-kernel@...r.kernel.org, 
 devicetree@...r.kernel.org, linux-spi@...r.kernel.org, 
 David Lechner <dlechner@...libre.com>
Subject: [PATCH 3/9] iio: adc: ad_sigma_delta: use BITS_TO_BYTES() macro

Use the BITS_TO_BYTES() macro instead of dividing by 8 to convert bits
to bytes.

This makes it more obvious what unit conversion is taking place.

In once instance, we also avoid the temporary assignment to a variable
as it was confusing that reg_size was being used with two different
units (bits and bytes).

Signed-off-by: David Lechner <dlechner@...libre.com>
---
 drivers/iio/adc/ad_sigma_delta.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/iio/adc/ad_sigma_delta.c b/drivers/iio/adc/ad_sigma_delta.c
index 1657f64f1c0465b249adcc8a70dda8faf4a90565..fa792c800c80f960aca75b28a60cb2588e69fe7d 100644
--- a/drivers/iio/adc/ad_sigma_delta.c
+++ b/drivers/iio/adc/ad_sigma_delta.c
@@ -7,6 +7,7 @@
  */
 
 #include <linux/align.h>
+#include <linux/bitops.h>
 #include <linux/device.h>
 #include <linux/err.h>
 #include <linux/interrupt.h>
@@ -190,7 +191,7 @@ int ad_sd_reset(struct ad_sigma_delta *sigma_delta)
 	unsigned int size;
 	int ret;
 
-	size = DIV_ROUND_UP(reset_length, 8);
+	size = BITS_TO_BYTES(reset_length);
 	buf = kcalloc(size, sizeof(*buf), GFP_KERNEL);
 	if (!buf)
 		return -ENOMEM;
@@ -419,7 +420,7 @@ int ad_sigma_delta_single_conversion(struct iio_dev *indio_dev,
 		data_reg = AD_SD_REG_DATA;
 
 	ret = ad_sd_read_reg(sigma_delta, data_reg,
-		DIV_ROUND_UP(chan->scan_type.realbits + chan->scan_type.shift, 8),
+		BITS_TO_BYTES(chan->scan_type.realbits + chan->scan_type.shift),
 		&raw_sample);
 
 out:
@@ -552,9 +553,8 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
 	unsigned int reg_size;
 	unsigned int data_reg;
 
-	reg_size = indio_dev->channels[0].scan_type.realbits +
-			indio_dev->channels[0].scan_type.shift;
-	reg_size = DIV_ROUND_UP(reg_size, 8);
+	reg_size = BITS_TO_BYTES(indio_dev->channels[0].scan_type.realbits +
+				 indio_dev->channels[0].scan_type.shift);
 
 	if (sigma_delta->info->data_reg != 0)
 		data_reg = sigma_delta->info->data_reg;
@@ -616,7 +616,7 @@ static irqreturn_t ad_sd_trigger_handler(int irq, void *p)
 		}
 	}
 
-	sample_size = indio_dev->channels[0].scan_type.storagebits / 8;
+	sample_size = BITS_TO_BYTES(indio_dev->channels[0].scan_type.storagebits);
 	sample_pos = sample_size * sigma_delta->current_slot;
 	memcpy(&sigma_delta->samples_buf[sample_pos], data, sample_size);
 	sigma_delta->current_slot++;

-- 
2.43.0