[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aFlx+Qvh9/Stx4vu@lizhi-Precision-Tower-5810>
Date: Mon, 23 Jun 2025 11:25:45 -0400
From: Frank Li <Frank.li@....com>
To: Alexander Dahl <ada@...rsis.com>
Cc: devicetree@...r.kernel.org, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Shawn Guo <shawnguo@...nel.org>,
Sascha Hauer <s.hauer@...gutronix.de>,
Pengutronix Kernel Team <kernel@...gutronix.de>,
Fabio Estevam <festevam@...il.com>,
"open list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <imx@...ts.linux.dev>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2] arm64: dts: imx8dxl-ss-conn: Disable USB3 nodes
On Mon, Jun 23, 2025 at 09:54:40AM +0200, Alexander Dahl wrote:
> The i.MX 8DualXLite/8SoloXLite has a different connectivity memory map
> than the generic i.MX8 has. One conflicting resource is usb, where the
> imx8dxl has a second usb2 phy @5b110000, while the generic imx8 dtsi has
> one usb2 phy and one usb3 phy, and the usb3otg @5b110000. When
> including both imx8dxl-ss-conn.dtsi and imx8-ss-conn.dtsi as done in
> imx8dxl.dtsi this leads to a duplicate unit-address warning.
>
> The usb3otg node was introduced after the initial imx8dxl support with
> commit a8bd7f155126 ("arm64: dts: imx8qxp: add cadence usb3 support")
> and since then leads to warnings like this (when built with W=2):
>
> DTC arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
> …/arch/arm64/boot/dts/freescale/imx8-ss-conn.dtsi:148.24-182.4: Warning (unique_unit_address): /bus@...00000/usb@...10000: duplicate unit-address (also used in node /bus@...00000/usbphy@...10000)
> …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@...00000/pcie@...10000: duplicate unit-address (also used in node /bus@...00000/pcie-ep@...10000)
Remove pcie part, which is not related this patch.
> also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
> also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3
>
> After the change that usb related warning is gone:
>
> DTC arch/arm64/boot/dts/freescale/imx8dxl-evk.dtb
> …/arch/arm64/boot/dts/freescale/imx8-ss-hsio.dtsi:52.23-81.4: Warning (unique_unit_address): /bus@...00000/pcie@...10000: duplicate unit-address (also used in node /bus@...00000/pcie-ep@...10000)
> also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-ss-hsio.dtsi:41.23-50.4
> also defined at …/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts:645.8-653.3
Needn't show this log again. Just said
Delete usb3.0 related nodes at dxl to fix above warning.
Frank
>
> Signed-off-by: Alexander Dahl <ada@...rsis.com>
> ---
>
> Notes:
> v2:
> - reworded commit message (build on mainline with W=2)
> - rebased on v6.16-rc3
>
> v1:
> - Link: https://lore.kernel.org/linux-devicetree/20250610060756.8212-1-ada@thorsis.com/
>
> arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> index 9b114bed084b..a66ba6d0a8c0 100644
> --- a/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8dxl-ss-conn.dtsi
> @@ -5,6 +5,8 @@
>
> /delete-node/ &enet1_lpcg;
> /delete-node/ &fec2;
> +/delete-node/ &usbotg3;
> +/delete-node/ &usb3_phy;
>
> / {
> conn_enet0_root_clk: clock-conn-enet0-root {
>
> base-commit: 86731a2a651e58953fc949573895f2fa6d456841
> --
> 2.39.5
>
Powered by blists - more mailing lists