[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ed0b9b6f-f480-40ec-b4d5-453c78bd8a5c@gmail.com>
Date: Mon, 23 Jun 2025 20:22:22 +0300
From: Bitterblue Smith <rtl8821cerfe2@...il.com>
To: Bernie Huang <phhuang@...ltek.com>, Ping-Ke Shih <pkshih@...ltek.com>,
Fedor Pchelkin <boddah8794@...il.com>
Cc: "linux-wireless@...r.kernel.org" <linux-wireless@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>
Subject: Re: [Bug report] rtw89: 8852b: IO_PAGE_FAULTs with beacon filter
feature enabled
On 14/05/2025 06:29, Bernie Huang wrote:
> -----Original Message-----
> From: Ping-Ke Shih <pkshih@...ltek.com>
> Sent: Thursday, May 8, 2025 8:59 AM
> To: Fedor Pchelkin <boddah8794@...il.com>
> Cc: Bernie Huang <phhuang@...ltek.com>; linux-wireless@...r.kernel.org; linux-kernel@...r.kernel.org
> Subject: RE: [Bug report] rtw89: 8852b: IO_PAGE_FAULTs with beacon filter feature enabled
>
> Fedor Pchelkin <boddah8794@...il.com> wrote:
>>> On Thu, 17. Apr 01:05, Ping-Ke Shih wrote:
>>>> Fedor Pchelkin <boddah8794@...il.com> wrote:
>>>>>
>>>>> On Wed, 16. Apr 00:49, Ping-Ke Shih wrote:
>>>>>> As bisection, can I summarize as below table?
>>>>>>
>>>>>> d56c261e52 firmware IO_PAGE_FAULT
>>>>>> (CQM support)
>>>>>> --------------- ----------- -----------------
>>>>>> o 0.29.29.7 yes
>>>>>> o 0.29.29.5 no
>>>>>> x 0.29.29.7 no
>>>>>> x 0.29.29.5 no
>>>>>>
>>>>>> If this table is correct, we will check the beacon filter feature in firmware.
>>>>>>
>>>>>
>>>>> Yes, it correctly describes the situation. My suspicion currently
>>>>> falls on the beacon filter feature in firmware, too.
>>>>
>>>> Could you help to test when we have updated firmware?
>>>>
>>>
>>> Hi,
>>>
>>> Were you able to reproduce or track down the problem?
>
>> Yes, we have reproduced this problem, and we found sending firmware command during deep PS mode will raise IO_PAGE_FAULT. With below setting to disable deep PS > mode, the symptom can disappear.
>
>> rtw89_core.ko disable_ps_mode=y
>
>> Now we are arranging CAT-C equipment to capture signals in PCIE bus to see what happens at that moment.
>
>> One possible solution (workaround) is to avoid sending firmware commands during deep PS mode, before we found out the root cause.
>
> Hi Fedor,
>
> Could you please check whether the attached firmware fixes this issue?
> The firmware version should be 1.29.29.9.
By the way, what does the first number mean? The previous version was
0.29.29.8. I would expect only the last number to change for this bug fix.
Powered by blists - more mailing lists