linux-kernel - Re: [PATCH 0/3] Add initial device tree for Billion Capture+

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <175064594803.881117.14325620699553640752.robh@kernel.org>
Date: Sun, 22 Jun 2025 21:39:09 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: Cristian Cozzolino <cristian_ci@...tonmail.com>
Cc: devicetree@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Bjorn Andersson <andersson@...nel.org>, 
 ~postmarketos/upstreaming@...ts.sr.ht, Conor Dooley <conor+dt@...nel.org>, 
 phone-devel@...r.kernel.org, linux-arm-msm@...r.kernel.org, 
 Konrad Dybcio <konradybcio@...nel.org>, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 0/3] Add initial device tree for Billion Capture+


On Fri, 20 Jun 2025 23:51:38 +0200, Cristian Cozzolino wrote:
> Billion Capture+ is a handset using the MSM8953 SoC released in 2017
> and sold by Flipkart.
> 
> Add a device tree with initial support for:
> 
> - GPIO keys
> - SDHCI (internal and external storage)
> - USB Device Mode
> - Regulators
> - Simple framebuffer
> 
> Signed-off-by: Cristian Cozzolino <cristian_ci@...tonmail.com>
> ---
> Cristian Cozzolino (3):
>       dt-bindings: vendor-prefixes: Add Flipkart
>       dt-bindings: arm: qcom: Add Billion Capture+
>       arm64: dts: qcom: msm8953: Add device tree for Billion Capture+
> 
>  Documentation/devicetree/bindings/arm/qcom.yaml    |   1 +
>  .../devicetree/bindings/vendor-prefixes.yaml       |   2 +
>  arch/arm64/boot/dts/qcom/Makefile                  |   1 +
>  .../arm64/boot/dts/qcom/msm8953-flipkart-rimob.dts | 251 +++++++++++++++++++++
>  4 files changed, 255 insertions(+)
> ---
> base-commit: 0ff41df1cb268fc69e703a08a57ee14ae967d0ca
> change-id: 20250620-rimob-initial-devicetree-da86a5bffc8b
> 
> Best regards,
> --
> Cristian Cozzolino <cristian_ci@...tonmail.com>
> 
> 
> 


My bot found new DTB warnings on the .dts files added or changed in this
series.

Some warnings may be from an existing SoC .dtsi. Or perhaps the warnings
are fixed by another series. Ultimately, it is up to the platform
maintainer whether these warnings are acceptable or not. No need to reply
unless the platform maintainer has comments.

If you already ran DT checks and didn't see these error(s), then
make sure dt-schema is up to date:

  pip3 install dtschema --upgrade


This patch series was applied (using b4) to base:
 Base: using specified base-commit 0ff41df1cb268fc69e703a08a57ee14ae967d0ca

If this is not the correct base, please add 'base-commit' tag
(or use b4 which does this automatically)

New warnings running 'make CHECK_DTBS=y for arch/arm64/boot/dts/qcom/' for 20250620-rimob-initial-devicetree-v1-0-8e667ea21f82@...tonmail.com:

arch/arm64/boot/dts/qcom/msm8953-flipkart-rimob.dtb: gpu@...0000 (qcom,adreno-506.0): clock-names:5: 'alwayson' is not one of ['core', 'iface', 'mem', 'mem_iface', 'alt_mem_iface', 'gfx3d', 'rbbmtimer', 'rbcpr']
	from schema $id: http://devicetree.org/schemas/display/msm/gpu.yaml#