linux-kernel - [PATCH v3 1/3] i3c: master: Add inline i3c_readl_fifo() and i3c_writel

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250624-i3c-writesl-readsl-v3-1-63ccf0870f01@analog.com>
Date: Tue, 24 Jun 2025 11:06:04 +0200
From: Jorge Marques <jorge.marques@...log.com>
To: Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Frank Li
	<Frank.Li@....com>,
        Przemysław Gaj <pgaj@...ence.com>
CC: <linux-i3c@...ts.infradead.org>, <linux-kernel@...r.kernel.org>,
        "Jorge
 Marques" <jorge.marques@...log.com>
Subject: [PATCH v3 1/3] i3c: master: Add inline i3c_readl_fifo() and
 i3c_writel_fifo()

The I3C abstraction expects u8 buffers, but some controllers operate with
a 32-bit bus width FIFO and cannot flag valid bytes individually. To avoid
reading or writing outside the buffer bounds, use 32-bit accesses where
possible and apply memcpy for any remaining bytes

Signed-off-by: Jorge Marques <jorge.marques@...log.com>
---
 drivers/i3c/internals.h | 37 +++++++++++++++++++++++++++++++++++++
 1 file changed, 37 insertions(+)

diff --git a/drivers/i3c/internals.h b/drivers/i3c/internals.h
index 433f6088b7cec8c77288ee24dbee8b18338aa1eb..6a11437fee47bd1d19354e983d4a561a4356b08d 100644
--- a/drivers/i3c/internals.h
+++ b/drivers/i3c/internals.h
@@ -22,4 +22,41 @@ int i3c_dev_enable_ibi_locked(struct i3c_dev_desc *dev);
 int i3c_dev_request_ibi_locked(struct i3c_dev_desc *dev,
 			       const struct i3c_ibi_setup *req);
 void i3c_dev_free_ibi_locked(struct i3c_dev_desc *dev);
+
+/**
+ * i3c_writel_fifo - Write data buffer to 32bit FIFO
+ * @addr: FIFO Address to write to
+ * @buf: Pointer to the data bytes to write
+ * @nbytes: Number of bytes to write
+ */
+static inline void i3c_writel_fifo(void __iomem *addr, const void *buf,
+				   int nbytes)
+{
+	writesl(addr, buf, nbytes / 4);
+	if (nbytes & 3) {
+		u32 tmp = 0;
+
+		memcpy(&tmp, buf + (nbytes & ~3), nbytes & 3);
+		writel(tmp, addr);
+	}
+}
+
+/**
+ * i3c_readl_fifo - Read data buffer from 32bit FIFO
+ * @addr: FIFO Address to read from
+ * @buf: Pointer to the buffer to store read bytes
+ * @nbytes: Number of bytes to read
+ */
+static inline void i3c_readl_fifo(const void __iomem *addr, void *buf,
+				  int nbytes)
+{
+	readsl(addr, buf, nbytes / 4);
+	if (nbytes & 3) {
+		u32 tmp;
+
+		tmp = readl(addr);
+		memcpy(buf + (nbytes & ~3), &tmp, nbytes & 3);
+	}
+}
+
 #endif /* I3C_INTERNAL_H */

-- 
2.49.0