| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <nixg4efp3zkdpd6h7kp6wkvam63batpoknov2nkgu36voks6bk@gzuackzl3l5g>
Date: Tue, 24 Jun 2025 13:27:03 +0200
From: Mehdi Djait <mehdi.djait@...ux.intel.com>
To: Laurent Pinchart <laurent.pinchart@...asonboard.com>
Cc: Sakari Ailus <sakari.ailus@...ux.intel.com>,
"Nirujogi, Pratap" <pnirujog@....com>, Pratap Nirujogi <pratap.nirujogi@....com>, mchehab@...nel.org,
hverkuil@...all.nl, bryan.odonoghue@...aro.org, krzk@...nel.org,
dave.stevenson@...pberrypi.com, hdegoede@...hat.com, jai.luthra@...asonboard.com,
tomi.valkeinen@...asonboard.com, linux-media@...r.kernel.org, linux-kernel@...r.kernel.org,
benjamin.chan@....com, bin.du@....com, grosikop@....com, king.li@....com,
dantony@....com, vengutta@....com, Svetoslav.Stoilov@....com,
Yana.Zheleva@....com
Subject: Re: [PATCH v3 RESEND] media: i2c: Add OV05C10 camera sensor driver
Hi Laurent, Hi Sakari,
On Tue, Jun 24, 2025 at 01:27:45PM +0300, Laurent Pinchart wrote:
> On Tue, Jun 24, 2025 at 10:20:34AM +0000, Sakari Ailus wrote:
> > On Tue, Jun 24, 2025 at 10:19:35AM +0000, Sakari Ailus wrote:
> > > On Tue, Jun 24, 2025 at 10:35:18AM +0200, Mehdi Djait wrote:
> > > > On Tue, Jun 24, 2025 at 01:05:03AM +0300, Laurent Pinchart wrote:
> > > > > On Mon, Jun 23, 2025 at 05:51:48PM -0400, Nirujogi, Pratap wrote:
> > > > > > On 6/16/2025 6:49 PM, Nirujogi, Pratap wrote:
> > > > > > >>> +static int ov05c10_probe(struct i2c_client *client)
> > > > > > >>> +{
> > > > > > >>> + struct ov05c10 *ov05c10;
> > > > > > >>> + u32 clkfreq;
> > > > > > >>> + int ret;
> > > > > > >>> +
> > > > > > >>> + ov05c10 = devm_kzalloc(&client->dev, sizeof(*ov05c10),
> > > > > > >>> GFP_KERNEL);
> > > > > > >>> + if (!ov05c10)
> > > > > > >>> + return -ENOMEM;
> > > > > > >>> +
> > > > > > >>> + struct fwnode_handle *fwnode = dev_fwnode(&client->dev);
> > > > > > >>> +
> > > > > > >>> + ret = fwnode_property_read_u32(fwnode, "clock-frequency",
> > > > > > >>> &clkfreq);
> > > > > > >>> + if (ret)
> > > > > > >>> + return dev_err_probe(&client->dev, -EINVAL,
> > > > > > >>> + "fail to get clock freq\n");
> > > > > > >>
> > > > > > >> Let's try to land
> > > > > > >> https://lore.kernel.org/linux-media/20250521104115.176950-1-
> > > > > > >> mehdi.djait@...ux.intel.com/
> > > > > > >> and replace the code above with devm_v4l2_sensor_clk_get().
> > > > > > >>
> > > > > > > Ok, we will verify on our side.
> > > > > >
> > > > > > We tried using devm_v4l2_sensor_clk_get() and found its required to add
> > > > > > support for software_node to make it work with this driver.
> > > > >
> > > > > Why is that ?
> > > > >
> > > > > > Please refer
> > > > > > the changes below and let us know if these should be submitted as a
> > > > > > separate patch.
> > > >
> > > > The helper is still not merged, so no patch is required.
> > > >
> > > > I will see if a change is needed from the helper side or the OV05C10 side.
> > >
> > > I wonder if there's a better way to figure out if you're running on a DT or
> > > ACPI based system than getting the device's parents and checking which one
> > > you find first, DT or ACPI. I think that should work for now at least.
> >
> > Or, rather, checking for non-OF node here would probably work the best. I
> > wouldn't expect these to be software node based on DT systems ever.
>
> Until it happens :-) And we'll handle it then.
So we have the following:
- The problem with this driver is due to lack of proper ACPI
description. HW is already shipping and AMD will work on better ACPI
description for future models. See [1]
- software_node can also be used on DT systems
[1] https://lore.kernel.org/lkml/0d801367-da24-4596-83d9-08ccd89ca670@redhat.com/
Now going back to the helper. If we want to support this case:
Approach 1: software_node || acpi
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -682,16 +682,17 @@ struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id)
const char *clk_id __free(kfree) = NULL;
struct clk_hw *clk_hw;
struct clk *clk;
- bool acpi_node;
+ bool acpi_sw_node;
u32 rate;
int ret;
clk = devm_clk_get_optional(dev, id);
ret = device_property_read_u32(dev, "clock-frequency", &rate);
- acpi_node = is_acpi_node(dev_fwnode(dev));
+ acpi_sw_node = is_acpi_node(dev_fwnode(dev)) ||
+ is_software_node(dev_fwnode(dev));
if (clk) {
- if (!ret && acpi_node) {
+ if (!ret && acpi_sw_node) {
ret = clk_set_rate(clk, rate);
if (ret) {
dev_err(dev, "Failed to set clock rate: %u\n",
@@ -705,7 +706,7 @@ struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id)
if (ret)
return ERR_PTR(ret);
- if (!IS_ENABLED(CONFIG_COMMON_CLK) || !acpi_node)
+ if (!IS_ENABLED(CONFIG_COMMON_CLK) || !acpi_sw_node)
return ERR_PTR(-ENOENT);
if (!id) {
Approach 2: of_node
--- a/drivers/media/v4l2-core/v4l2-common.c
+++ b/drivers/media/v4l2-core/v4l2-common.c
@@ -682,16 +682,16 @@ struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id)
const char *clk_id __free(kfree) = NULL;
struct clk_hw *clk_hw;
struct clk *clk;
- bool acpi_node;
+ bool of_node;
u32 rate;
int ret;
clk = devm_clk_get_optional(dev, id);
ret = device_property_read_u32(dev, "clock-frequency", &rate);
- acpi_node = is_acpi_node(dev_fwnode(dev));
+ of_node = is_of_node(dev_fwnode(dev));
if (clk) {
- if (!ret && acpi_node) {
+ if (!ret && !of_node) {
ret = clk_set_rate(clk, rate);
if (ret) {
dev_err(dev, "Failed to set clock rate: %u\n",
@@ -705,7 +705,7 @@ struct clk *devm_v4l2_sensor_clk_get(struct device *dev, const char *id)
if (ret)
return ERR_PTR(ret);
- if (!IS_ENABLED(CONFIG_COMMON_CLK) || !acpi_node)
+ if (!IS_ENABLED(CONFIG_COMMON_CLK) || of_node)
return ERR_PTR(-ENOENT);
if (!id) {
--
Kind Regards
Mehdi Djait
Powered by blists - more mailing lists