| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250625-qcs615-v2-2-0f1899647b36@oss.qualcomm.com>
Date: Wed, 25 Jun 2025 15:55:07 +0800
From: "Yu Zhang(Yuriy)" <yu.zhang@....qualcomm.com>
To: Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Dmitry Baryshkov <lumag@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
"Yu Zhang (Yuriy)" <yu.zhang@....qualcomm.com>
Subject: [PATCH v2 2/2] arm64: dts: qcom: qcs615-ride: add WiFi/BT nodes
Add a node for the PMU module of the WCN6855 present on the qcs615 ride
board. Assign its LDO power outputs to the existing WiFi/BT module.
Signed-off-by: Yu Zhang(Yuriy) <yu.zhang@....qualcomm.com>
---
arch/arm64/boot/dts/qcom/qcs615-ride.dts | 131 +++++++++++++++++++++++++++++++
1 file changed, 131 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qcs615-ride.dts b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
index 011f8ae077c256f079ce1b07720374a9bf721488..69597b6f9d0bccb294a6dcac3fe4eb0e21f2cf7a 100644
--- a/arch/arm64/boot/dts/qcom/qcs615-ride.dts
+++ b/arch/arm64/boot/dts/qcom/qcs615-ride.dts
@@ -18,6 +18,7 @@ aliases {
mmc0 = &sdhc_1;
mmc1 = &sdhc_2;
serial0 = &uart0;
+ serial1 = &uart7;
};
chosen {
@@ -209,6 +210,83 @@ vreg_l17a: ldo17 {
regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
};
};
+
+ vreg_conn_1p8: vreg_conn_1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_1p8";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 1 GPIO_ACTIVE_HIGH>;
+ };
+
+ vreg_conn_pa: vreg_conn_pa {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_conn_pa";
+ startup-delay-us = <4000>;
+ enable-active-high;
+ gpio = <&pm8150_gpios 6 GPIO_ACTIVE_HIGH>;
+ };
+
+ wcn6855-pmu {
+ compatible = "qcom,wcn6855-pmu";
+
+ pinctrl-0 = <&bt_en_state>, <&wlan_en_state>;
+ pinctrl-names = "default";
+
+ bt-enable-gpios = <&tlmm 85 GPIO_ACTIVE_HIGH>;
+ wlan-enable-gpios = <&tlmm 98 GPIO_ACTIVE_HIGH>;
+
+ vddio-supply = <&vreg_conn_pa>;
+ vddaon-supply = <&vreg_s5a>;
+ vddpmu-supply = <&vreg_conn_1p8>;
+ vddrfa0p95-supply = <&vreg_s5a>;
+ vddrfa1p3-supply = <&vreg_s6a>;
+ vddrfa1p9-supply = <&vreg_l15a>;
+ vddpcie1p3-supply = <&vreg_s6a>;
+ vddpcie1p9-supply = <&vreg_l15a>;
+
+ regulators {
+ vreg_pmu_rfa_cmn: ldo0 {
+ regulator-name = "vreg_pmu_rfa_cmn";
+ };
+
+ vreg_pmu_aon_0p59: ldo1 {
+ regulator-name = "vreg_pmu_aon_0p59";
+ };
+
+ vreg_pmu_wlcx_0p8: ldo2 {
+ regulator-name = "vreg_pmu_wlcx_0p8";
+ };
+
+ vreg_pmu_wlmx_0p85: ldo3 {
+ regulator-name = "vreg_pmu_wlmx_0p85";
+ };
+
+ vreg_pmu_btcmx_0p85: ldo4 {
+ regulator-name = "vreg_pmu_btcmx_0p85";
+ };
+
+ vreg_pmu_rfa_0p8: ldo5 {
+ regulator-name = "vreg_pmu_rfa_0p8";
+ };
+
+ vreg_pmu_rfa_1p2: ldo6 {
+ regulator-name = "vreg_pmu_rfa_1p2";
+ };
+
+ vreg_pmu_rfa_1p7: ldo7 {
+ regulator-name = "vreg_pmu_rfa_1p7";
+ };
+
+ vreg_pmu_pcie_0p9: ldo8 {
+ regulator-name = "vreg_pmu_pcie_0p9";
+ };
+
+ vreg_pmu_pcie_1p8: ldo9 {
+ regulator-name = "vreg_pmu_pcie_1p8";
+ };
+ };
+ };
};
&gcc {
@@ -234,6 +312,25 @@ &pcie_phy {
status = "okay";
};
+&pcieport0 {
+ wifi@0 {
+ compatible = "pci17cb,1103";
+ reg = <0x10000 0x0 0x0 0x0 0x0>;
+
+ qcom,ath11k-calibration-variant = "QC_QCS615_Ride";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddwlcx-supply = <&vreg_pmu_wlcx_0p8>;
+ vddwlmx-supply = <&vreg_pmu_wlmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ vddpcie0p9-supply = <&vreg_pmu_pcie_0p9>;
+ vddpcie1p8-supply = <&vreg_pmu_pcie_1p8>;
+ };
+};
+
&pm8150_gpios {
usb2_en: usb2-en-state {
pins = "gpio10";
@@ -257,6 +354,10 @@ &qupv3_id_0 {
status = "okay";
};
+&qupv3_id_1 {
+ status = "okay";
+};
+
&remoteproc_adsp {
firmware-name = "qcom/qcs615/adsp.mbn";
@@ -274,6 +375,13 @@ &rpmhcc {
};
&tlmm {
+ bt_en_state: bt-en-state {
+ pins = "gpio85";
+ function = "gpio";
+ output-low;
+ bias-pull-down;
+ };
+
pcie_default_state: pcie-default-state {
clkreq-pins {
pins = "gpio90";
@@ -296,6 +404,13 @@ wake-pins {
bias-pull-up;
};
};
+
+ wlan_en_state: wlan-en-state {
+ pins = "gpio98";
+ function = "gpio";
+ output-low;
+ bias-pull-down;
+ };
};
&sdhc_1 {
@@ -336,6 +451,22 @@ &uart0 {
status = "okay";
};
+&uart7 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "qcom,wcn6855-bt";
+ firmware-name = "QCA6698/hpnv21", "QCA6698/hpbtfw21.tlv";
+
+ vddrfacmn-supply = <&vreg_pmu_rfa_cmn>;
+ vddaon-supply = <&vreg_pmu_aon_0p59>;
+ vddbtcmx-supply = <&vreg_pmu_btcmx_0p85>;
+ vddrfa0p8-supply = <&vreg_pmu_rfa_0p8>;
+ vddrfa1p2-supply = <&vreg_pmu_rfa_1p2>;
+ vddrfa1p7-supply = <&vreg_pmu_rfa_1p7>;
+ };
+};
+
&usb_1_hsphy {
vdd-supply = <&vreg_l5a>;
vdda-pll-supply = <&vreg_l12a>;
--
2.34.1
Powered by blists - more mailing lists