linux-kernel - [PATCH 3/4] firmware: qcom: scm: initialize tzmem before marking SCM as available

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250625-qcom-scm-race-v1-3-45601e1f248b@linaro.org>
Date: Wed, 25 Jun 2025 10:14:50 +0200
From: Bartosz Golaszewski <brgl@...ev.pl>
To: Bjorn Andersson <andersson@...nel.org>, 
 Konrad Dybcio <konradybcio@...nel.org>
Cc: linux-arm-msm@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
Subject: [PATCH 3/4] firmware: qcom: scm: initialize tzmem before marking
 SCM as available

From: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>

Now that qcom_scm_shm_bridge_enable() uses the struct device passed to
it as argument to make the QCOM_SCM_MP_SHM_BRIDGE_ENABLE SCM call, we
can move the TZMem initialization before the assignment of the __scm
pointer in the SCM driver (which marks SCM as ready to users) thus
fixing the potential race between consumer calls and the memory pool
initialization.

Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@...aro.org>
---
 drivers/firmware/qcom/qcom_scm.c | 46 +++++++++++++++++-----------------------
 1 file changed, 20 insertions(+), 26 deletions(-)

diff --git a/drivers/firmware/qcom/qcom_scm.c b/drivers/firmware/qcom/qcom_scm.c
index 3dfc7d410348a4b17b22acee18b51949c58f7351..561d4db7a847419fe5f9f034b09554de6a16a161 100644
--- a/drivers/firmware/qcom/qcom_scm.c
+++ b/drivers/firmware/qcom/qcom_scm.c
@@ -2250,6 +2250,26 @@ static int qcom_scm_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
+	ret = of_reserved_mem_device_init(scm->dev);
+	if (ret && ret != -ENODEV)
+		return dev_err_probe(scm->dev, ret,
+				     "Failed to setup the reserved memory region for TZ mem\n");
+
+	ret = qcom_tzmem_enable(scm->dev);
+	if (ret)
+		return dev_err_probe(scm->dev, ret,
+				     "Failed to enable the TrustZone memory allocator\n");
+
+	memset(&pool_config, 0, sizeof(pool_config));
+	pool_config.initial_size = 0;
+	pool_config.policy = QCOM_TZMEM_POLICY_ON_DEMAND;
+	pool_config.max_size = SZ_256K;
+
+	scm->mempool = devm_qcom_tzmem_pool_new(scm->dev, &pool_config);
+	if (IS_ERR(scm->mempool))
+		return dev_err_probe(scm->dev, PTR_ERR(scm->mempool),
+				     "Failed to create the SCM memory pool\n");
+
 	/* Paired with smp_load_acquire() in qcom_scm_is_available(). */
 	smp_store_release(&__scm, scm);
 
@@ -2283,32 +2303,6 @@ static int qcom_scm_probe(struct platform_device *pdev)
 	if (of_property_read_bool(pdev->dev.of_node, "qcom,sdi-enabled") || !download_mode)
 		qcom_scm_disable_sdi();
 
-	ret = of_reserved_mem_device_init(__scm->dev);
-	if (ret && ret != -ENODEV) {
-		dev_err_probe(__scm->dev, ret,
-			      "Failed to setup the reserved memory region for TZ mem\n");
-		goto err;
-	}
-
-	ret = qcom_tzmem_enable(__scm->dev);
-	if (ret) {
-		dev_err_probe(__scm->dev, ret,
-			      "Failed to enable the TrustZone memory allocator\n");
-		goto err;
-	}
-
-	memset(&pool_config, 0, sizeof(pool_config));
-	pool_config.initial_size = 0;
-	pool_config.policy = QCOM_TZMEM_POLICY_ON_DEMAND;
-	pool_config.max_size = SZ_256K;
-
-	__scm->mempool = devm_qcom_tzmem_pool_new(__scm->dev, &pool_config);
-	if (IS_ERR(__scm->mempool)) {
-		ret = dev_err_probe(__scm->dev, PTR_ERR(__scm->mempool),
-				    "Failed to create the SCM memory pool\n");
-		goto err;
-	}
-
 	/*
 	 * Initialize the QSEECOM interface.
 	 *

-- 
2.48.1