linux-kernel - [PATCH 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add support for PMIV0104

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250625-sm7635-eusb-repeater-v1-4-19d85541eb4c@fairphone.com>
Date: Wed, 25 Jun 2025 11:14:59 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Vinod Koul <vkoul@...nel.org>, 
 Kishon Vijay Abraham I <kishon@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Abel Vesa <abel.vesa@...aro.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, linux-phy@...ts.infradead.org, 
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org, 
 Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 4/4] phy: qualcomm: phy-qcom-eusb2-repeater: Add support
 for PMIV0104

Add support for the eUSB2 repeater found on the PMIV0104. There is no
default init table for this PMIC, just the board-specific tuning
parameters are used on top of the default tuning values.

Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
 drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
index 61594739e5b12706775622e1f76af6ad5d2d29bf..3d4cdc4c18becd8efd5015e698b836ad4d7cf18c 100644
--- a/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
+++ b/drivers/phy/qualcomm/phy-qcom-eusb2-repeater.c
@@ -82,6 +82,14 @@ static const struct eusb2_repeater_cfg pm8550b_eusb2_cfg = {
 	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),
 };
 
+static const struct eusb2_repeater_cfg pmiv0104_eusb2_cfg = {
+	/* No PMIC-specific init sequence, only board level tuning via DT */
+	.init_tbl	= (struct eusb2_repeater_init_tbl_reg[]) {},
+	.init_tbl_num	= 0,
+	.vreg_list	= pm8550b_vreg_l,
+	.num_vregs	= ARRAY_SIZE(pm8550b_vreg_l),
+};
+
 static const struct eusb2_repeater_cfg smb2360_eusb2_cfg = {
 	.init_tbl	= smb2360_init_tbl,
 	.init_tbl_num	= ARRAY_SIZE(smb2360_init_tbl),
@@ -264,6 +272,10 @@ static const struct of_device_id eusb2_repeater_of_match_table[] = {
 		.compatible = "qcom,pm8550b-eusb2-repeater",
 		.data = &pm8550b_eusb2_cfg,
 	},
+	{
+		.compatible = "qcom,pmiv0104-eusb2-repeater",
+		.data = &pmiv0104_eusb2_cfg,
+	},
 	{
 		.compatible = "qcom,smb2360-eusb2-repeater",
 		.data = &smb2360_eusb2_cfg,

-- 
2.50.0