linux-kernel - [PATCH 4/4] arm64: dts: qcom: Add PMIV0104 PMIC

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250625-sm7635-pmiv0104-v1-4-68d287c4b630@fairphone.com>
Date: Wed, 25 Jun 2025 11:18:05 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Lee Jones <lee@...nel.org>, Rob Herring <robh@...nel.org>, 
 Krzysztof Kozlowski <krzk+dt@...nel.org>, 
 Conor Dooley <conor+dt@...nel.org>, Stephen Boyd <sboyd@...nel.org>, 
 Bjorn Andersson <andersson@...nel.org>, 
 Linus Walleij <linus.walleij@...aro.org>, 
 Konrad Dybcio <konradybcio@...nel.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org, 
 linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org, 
 linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org, 
 Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 4/4] arm64: dts: qcom: Add PMIV0104 PMIC

Add a dts for the PMIC used e.g. with SM7635 devices.

Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
 arch/arm64/boot/dts/qcom/pmiv0104.dtsi | 63 ++++++++++++++++++++++++++++++++++
 1 file changed, 63 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmiv0104.dtsi b/arch/arm64/boot/dts/qcom/pmiv0104.dtsi
new file mode 100644
index 0000000000000000000000000000000000000000..04d929db76f409c49c47ef0147a3de568006973a
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/pmiv0104.dtsi
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@...rphone.com>
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/spmi/spmi.h>
+
+/ {
+	thermal-zones {
+		pmiv0104-thermal {
+			polling-delay-passive = <100>;
+
+			thermal-sensors = <&pmiv0104_temp_alarm>;
+
+			trips {
+				trip0 {
+					temperature = <95000>;
+					hysteresis = <0>;
+					type = "passive";
+				};
+
+				trip1 {
+					temperature = <115000>;
+					hysteresis = <0>;
+					type = "hot";
+				};
+			};
+		};
+	};
+};
+
+&spmi_bus {
+	pmic@...V0104_SID {
+		compatible = "qcom,pmiv0104", "qcom,spmi-pmic";
+		reg = <PMIV0104_SID SPMI_USID>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		pmiv0104_temp_alarm: temp-alarm@a00 {
+			compatible = "qcom,spmi-temp-alarm";
+			reg = <0xa00>;
+			interrupts = <PMIV0104_SID 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+			#thermal-sensor-cells = <0>;
+		};
+
+		pmiv0104_gpios: gpio@...0 {
+			compatible = "qcom,pmiv0104-gpio", "qcom,spmi-gpio";
+			reg = <0x8800>;
+			gpio-controller;
+			gpio-ranges = <&pmiv0104_gpios 0 0 10>;
+			#gpio-cells = <2>;
+			interrupt-controller;
+			#interrupt-cells = <2>;
+		};
+
+		pmiv0104_eusb2_repeater: phy@...0 {
+			compatible = "qcom,pmiv0104-eusb2-repeater";
+			reg = <0xfd00>;
+			#phy-cells = <0>;
+		};
+	};
+};

-- 
2.50.0