| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20250625-sm7635-fp6-initial-v1-14-d9cd322eac1b@fairphone.com>
Date: Wed, 25 Jun 2025 11:23:09 +0200
From: Luca Weiss <luca.weiss@...rphone.com>
To: Will Deacon <will@...nel.org>, Robin Murphy <robin.murphy@....com>,
Joerg Roedel <joro@...tes.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, "Rafael J. Wysocki" <rafael@...nel.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Manivannan Sadhasivam <mani@...nel.org>,
Herbert Xu <herbert@...dor.apana.org.au>,
"David S. Miller" <davem@...emloft.net>, Vinod Koul <vkoul@...nel.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, Robert Marko <robimarko@...il.com>,
Das Srinagesh <quic_gurus@...cinc.com>,
Thomas Gleixner <tglx@...utronix.de>, Jassi Brar <jassisinghbrar@...il.com>,
Amit Kucheria <amitk@...nel.org>, Thara Gopinath <thara.gopinath@...il.com>,
Daniel Lezcano <daniel.lezcano@...aro.org>, Zhang Rui <rui.zhang@...el.com>,
Lukasz Luba <lukasz.luba@....com>, Ulf Hansson <ulf.hansson@...aro.org>
Cc: ~postmarketos/upstreaming@...ts.sr.ht, phone-devel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, iommu@...ts.linux.dev,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-pm@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-crypto@...r.kernel.org, dmaengine@...r.kernel.org,
linux-mmc@...r.kernel.org, Luca Weiss <luca.weiss@...rphone.com>
Subject: [PATCH 14/14] arm64: dts: qcom: Add The Fairphone (Gen. 6)
Add a devicetree for The Fairphone (Gen. 6) smartphone, which is based
on the SM7635 SoC.
Supported functionality as of this initial submission:
* Debug UART
* Regulators (PM7550, PM8550VS, PMR735B, PM8008)
* Remoteprocs (ADSP, CDSP, MPSS, WPSS)
* Power Button, Volume Keys, Switch
* Display (using simple-framebuffer)
* PMIC-GLINK (Charger, Fuel gauge, USB-C mode switching)
* Camera flash/torch LED
* SD card
* USB
Signed-off-by: Luca Weiss <luca.weiss@...rphone.com>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sm7635-fairphone-fp6.dts | 837 ++++++++++++++++++++++
2 files changed, 838 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 669b888b27a1daa93ac15f47e8b9a302bb0922c2..c06c93a92fb9ce24aed9dee51c0907ab22903ac5 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -266,6 +266,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-curtana.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7125-xiaomi-joyeuse.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7325-nothing-spacewar.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm7635-fairphone-fp6.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-hdk.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-microsoft-surface-duo.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm8150-mtp.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm7635-fairphone-fp6.dts b/arch/arm64/boot/dts/qcom/sm7635-fairphone-fp6.dts
new file mode 100644
index 0000000000000000000000000000000000000000..d687e4e75f21afbe317093cd3b48030354411592
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm7635-fairphone-fp6.dts
@@ -0,0 +1,837 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2025, Luca Weiss <luca.weiss@...rphone.com>
+ */
+
+/dts-v1/;
+
+#define PMIV0104_SID 7
+
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include "sm7635.dtsi"
+#include "pm8550vs.dtsi"
+#include "pmiv0104.dtsi" /* PMIV0108 */
+#include "pmk8550.dtsi" /* PMK7635 */
+#include "pmr735b.dtsi"
+#include "pmxr2230.dtsi" /* PM7550 */
+
+/ {
+ model = "The Fairphone (Gen. 6)";
+ compatible = "fairphone,fp6", "qcom,sm7635";
+ chassis-type = "handset";
+
+ aliases {
+ serial0 = &uart5;
+ };
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@...40000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0xe3940000 0x0 (2484 * 1116 * 4)>;
+ width = <1116>;
+ height = <2484>;
+ stride = <(1116 * 4)>;
+ format = "a8r8g8b8";
+ panel = <&panel>;
+ interconnects = <&mmss_noc MASTER_MDP QCOM_ICC_TAG_ALWAYS
+ &mc_virt SLAVE_EBI1 QCOM_ICC_TAG_ALWAYS>;
+ clocks = <&gcc GCC_DISP_HF_AXI_CLK>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-0 = <&volume_up_default>;
+ pinctrl-names = "default";
+
+ key-volume-up {
+ label = "Volume Up";
+ gpios = <&pmxr2230_gpios 6 GPIO_ACTIVE_LOW>;
+ linux,code = <KEY_VOLUMEUP>;
+ };
+
+ switch {
+ label = "Switch";
+ gpios = <&tlmm 107 GPIO_ACTIVE_HIGH>;
+ linux,input-type = <EV_SW>;
+ linux,code = <SW_MUTE_DEVICE>;
+ };
+ };
+
+ /* Dummy panel for simple-framebuffer dimension info */
+ panel: panel {
+ compatible = "boe,bj631jhm-t71-d900";
+ width-mm = <65>;
+ height-mm = <146>;
+ };
+
+ pmic-glink {
+ compatible = "qcom,sm7635-pmic-glink",
+ "qcom,sm8550-pmic-glink",
+ "qcom,pmic-glink";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ orientation-gpios = <&tlmm 131 GPIO_ACTIVE_HIGH>;
+
+ connector@0 {
+ compatible = "usb-c-connector";
+ reg = <0>;
+
+ power-role = "dual";
+ data-role = "dual";
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ pmic_glink_hs_in: endpoint {
+ remote-endpoint = <&usb_1_dwc3_hs>;
+ };
+ };
+ };
+ };
+ };
+
+ vreg_ff_afvdd_2p8: regulator-ff-afvdd-2p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "ff_afvdd_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 93 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_bob>;
+ };
+
+ vreg_uw_afvdd_2p8: regulator-uw-afvdd-2p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "uw_afvdd_2p8";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 23 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_bob>;
+ };
+
+ vreg_uw_dvdd: regulator-uw-dvdd {
+ compatible = "regulator-fixed";
+ regulator-name = "uw_dvdd";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 28 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_s1b>;
+ };
+
+ vreg_ois_avdd0_1p8: regulator-ois-avdd0-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "ois_avdd0_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_bob>;
+ };
+
+ vreg_ois_vdd: regulator-ois-vdd {
+ compatible = "regulator-fixed";
+ regulator-name = "ois_vdd";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 24 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_oled_dvdd_1p2: regulator-oled-dvdd-1p2 {
+ compatible = "regulator-fixed";
+ regulator-name = "oled_dvdd_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ gpio = <&tlmm 54 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vreg_s2b>;
+
+ regulator-boot-on;
+ };
+
+ vreg_s1j: regulator-pm3001a-s1j {
+ compatible = "regulator-fixed";
+ regulator-name = "pm3001a_s1j";
+ regulator-min-microvolt = <2200000>;
+ regulator-max-microvolt = <2200000>;
+ startup-delay-us = <1000>;
+
+ gpio = <&pmr735b_gpios 1 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+
+ pinctrl-0 = <&s1j_enable_default>;
+ pinctrl-names = "default";
+ };
+
+ vreg_vtof_ldo_3p3: regulator-vtof-ldo-3p3 {
+ compatible = "regulator-fixed";
+ regulator-name = "vtof_ldo_3p3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <100>;
+
+ gpio = <&tlmm 76 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vph_pwr: regulator-vph-pwr {
+ compatible = "regulator-fixed";
+
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+ };
+
+ reserved-memory {
+ /*
+ * ABL is powering down display and controller if this node is
+ * not named exactly "splash_region".
+ */
+ splash_region@...40000 {
+ reg = <0x0 0xe3940000 0x0 0x2b00000>;
+ no-map;
+ };
+ };
+
+ thermal-zones {
+ pm8008-thermal {
+ polling-delay-passive = <100>;
+ thermal-sensors = <&pm8008>;
+
+ trips {
+ trip0 {
+ temperature = <95000>;
+ hysteresis = <0>;
+ type = "passive";
+ };
+
+ trip1 {
+ temperature = <115000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+};
+
+&apps_rsc {
+ regulators-0 {
+ compatible = "qcom,pm7550-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s1b>;
+ vdd-l2-l3-supply = <&vreg_s3b>;
+ vdd-l4-l5-supply = <&vreg_s2b>;
+ vdd-l6-supply = <&vreg_s2b>;
+ vdd-l7-supply = <&vreg_s1b>;
+ vdd-l8-supply = <&vreg_s1b>;
+ vdd-l9-l10-supply = <&vreg_s1b>;
+ vdd-l11-supply = <&vreg_s1b>;
+ vdd-l12-l14-supply = <&vreg_bob>;
+ vdd-l13-l16-supply = <&vreg_bob>;
+ vdd-l15-l17-l18-l19-l20-l21-l22-l23-supply = <&vreg_bob>;
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+
+ qcom,pmic-id = "b";
+
+ vreg_s1b: smps1 {
+ regulator-name = "vreg_s1b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2080000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s2b: smps2 {
+ regulator-name = "vreg_s2b";
+ regulator-min-microvolt = <1256000>;
+ regulator-max-microvolt = <1408000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_s3b: smps3 {
+ regulator-name = "vreg_s3b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <1040000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2b: ldo2 {
+ regulator-name = "vreg_l2b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3b: ldo3 {
+ regulator-name = "vreg_l3b";
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <912000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4b: ldo4 {
+ regulator-name = "vreg_l4b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5b: ldo5 {
+ regulator-name = "vreg_l5b";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7b: ldo7 {
+ regulator-name = "vreg_l7b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8b: ldo8 {
+ regulator-name = "vreg_l8b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9b: ldo9 {
+ regulator-name = "vreg_l9b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10b: ldo10 {
+ regulator-name = "vreg_l10b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11b: ldo11 {
+ regulator-name = "vreg_l11b";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l12b: ldo12 {
+ regulator-name = "vreg_l12b";
+ /*
+ * Skip voltage voting for UFS VCC.
+ */
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l13b: ldo13 {
+ regulator-name = "vreg_l13b";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14b: ldo14 {
+ regulator-name = "vreg_l14b";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15b: ldo15 {
+ regulator-name = "vreg_l15b";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l16b: ldo16 {
+ regulator-name = "vreg_l16b";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3008000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17b: ldo17 {
+ regulator-name = "vreg_l17b";
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3104000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18b: ldo18 {
+ regulator-name = "vreg_l18b";
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l19b: ldo19 {
+ regulator-name = "vreg_l19b";
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20b: ldo20 {
+ regulator-name = "vreg_l20b";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21b: ldo21 {
+ regulator-name = "vreg_l21b";
+ regulator-min-microvolt = <1620000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22b: ldo22 {
+ regulator-name = "vreg_l22b";
+ regulator-min-microvolt = <3200000>;
+ regulator-max-microvolt = <3200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23b: ldo23 {
+ regulator-name = "vreg_l23b";
+ regulator-min-microvolt = <1650000>;
+ regulator-max-microvolt = <3544000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_bob: bob {
+ regulator-name = "vreg_bob";
+ regulator-min-microvolt = <3008000>;
+ regulator-max-microvolt = <3960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-1 {
+ compatible = "qcom,pm8550vs-rpmh-regulators";
+
+ vdd-l1-supply = <&vreg_s3b>;
+ vdd-l3-supply = <&vreg_s3b>;
+
+ qcom,pmic-id = "c";
+
+ vreg_l2c: ldo2 {
+ regulator-name = "vreg_l2c";
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <650000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+
+ regulators-2 {
+ compatible = "qcom,pmr735b-rpmh-regulators";
+
+ vdd-l1-l2-supply= <&vreg_s3b>;
+ vdd-l3-supply= <&vreg_s3b>;
+ vdd-l4-supply= <&vreg_s1b>;
+ vdd-l5-supply= <&vreg_s2b>;
+ vdd-l6-supply= <&vreg_s2b>;
+ vdd-l7-l8-supply= <&vreg_s2b>;
+ vdd-l9-supply= <&vreg_s3b>;
+ vdd-l10-supply= <&vreg_s1b>;
+ vdd-l11-supply= <&vreg_s3b>;
+ vdd-l12-supply= <&vreg_s3b>;
+
+ qcom,pmic-id = "f";
+
+ vreg_l1f: ldo1 {
+ regulator-name = "vreg_l1f";
+ regulator-min-microvolt = <852000>;
+ regulator-max-microvolt = <950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l2f: ldo2 {
+ regulator-name = "vreg_l2f";
+ regulator-min-microvolt = <751000>;
+ regulator-max-microvolt = <824000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l3f: ldo3 {
+ regulator-name = "vreg_l3f";
+ regulator-min-microvolt = <650000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l4f: ldo4 {
+ regulator-name = "vreg_l4f";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1950000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l5f: ldo5 {
+ regulator-name = "vreg_l5f";
+ regulator-min-microvolt = <1140000>;
+ regulator-max-microvolt = <1260000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l6f: ldo6 {
+ regulator-name = "vreg_l6f";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7f: ldo7 {
+ regulator-name = "vreg_l7f";
+ regulator-min-microvolt = <1080000>;
+ regulator-max-microvolt = <1350000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8f: ldo8 {
+ regulator-name = "vreg_l8f";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1320000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9f: ldo9 {
+ regulator-name = "vreg_l9f";
+ regulator-min-microvolt = <870000>;
+ regulator-max-microvolt = <970000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10f: ldo10 {
+ regulator-name = "vreg_l10f";
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11f: ldo11 {
+ regulator-name = "vreg_l11f";
+ regulator-min-microvolt = <320000>;
+ regulator-max-microvolt = <864000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+ };
+};
+
+&dispcc {
+ /* Disable for now so simple-framebuffer continues working */
+ status = "disabled";
+};
+
+&gpi_dma0 {
+ status = "okay";
+};
+
+&gpi_dma1 {
+ status = "okay";
+};
+
+&i2c1 {
+ /* Samsung NFC @ 0x27 */
+
+ status = "okay";
+};
+
+&i2c3 {
+ /* AW88261FCR amplifier (top) @ 0x34 */
+ /* AW88261FCR amplifier (bottom) @ 0x35 */
+
+ status = "okay";
+};
+
+&i2c7 {
+ status = "okay";
+
+ pm8008: pmic@8 {
+ compatible = "qcom,pm8008";
+ reg = <0x8>;
+
+ interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_RISING>;
+ reset-gpios = <&pmr735b_gpios 3 GPIO_ACTIVE_LOW>;
+
+ vdd-l1-l2-supply = <&vreg_s2b>;
+ vdd-l3-l4-supply = <&vreg_bob>;
+ vdd-l5-supply = <&vreg_bob>;
+ vdd-l6-supply = <&vreg_s1b>;
+ vdd-l7-supply = <&vreg_bob>;
+
+ pinctrl-0 = <&pm8008_int_default>, <&pm8008_reset_n_default>;
+ pinctrl-names = "default";
+
+ gpio-controller;
+ #gpio-cells = <2>;
+ gpio-ranges = <&pm8008 0 0 2>;
+
+ interrupt-controller;
+ #interrupt-cells = <2>;
+
+ #thermal-sensor-cells = <0>;
+
+ regulators {
+ vreg_l1p: ldo1 {
+ regulator-name = "vreg_l1p";
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ vreg_l2p: ldo2 {
+ regulator-name = "vreg_l2p";
+ regulator-min-microvolt = <950000>;
+ regulator-max-microvolt = <1144000>;
+ };
+
+ vreg_l3p: ldo3 {
+ regulator-name = "vreg_l3p";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ vreg_l4p: ldo4 {
+ regulator-name = "vreg_l4p";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ vreg_l5p: ldo5 {
+ regulator-name = "vreg_l5p";
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2900000>;
+ };
+
+ vreg_l6p: ldo6 {
+ regulator-name = "vreg_l6p";
+ regulator-min-microvolt = <1700000>;
+ regulator-max-microvolt = <1896000>;
+ };
+
+ vreg_l7p: ldo7 {
+ regulator-name = "vreg_l7p";
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <3400000>;
+ };
+ };
+ };
+
+ /* VL53L3 ToF @ 0x29 */
+ /* AW86938FCR vibrator @ 0x5a */
+};
+
+&pm8550vs_d {
+ status = "disabled";
+};
+
+&pm8550vs_e {
+ status = "disabled";
+};
+
+&pm8550vs_g {
+ status = "disabled";
+};
+
+&pmiv0104_eusb2_repeater {
+ vdd18-supply = <&vreg_l7b>;
+ vdd3-supply = <&vreg_l17b>;
+
+ qcom,tune-res-fsdif = /bits/ 8 <0x5>;
+ qcom,tune-usb2-amplitude = /bits/ 8 <0x8>;
+ qcom,tune-usb2-disc-thres = /bits/ 8 <0x7>;
+ qcom,tune-usb2-preem = /bits/ 8 <0x6>;
+};
+
+&pmr735b_gpios {
+ pm8008_reset_n_default: pm8008-reset-n-default-state {
+ pins = "gpio3";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ bias-pull-down;
+ };
+
+ s1j_enable_default: s1j-enable-default-state {
+ pins = "gpio1";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <0>;
+ bias-disable;
+ output-low;
+ };
+};
+
+&pmxr2230_gpios {
+ volume_up_default: volume-up-default-state {
+ pins = "gpio6";
+ function = PMIC_GPIO_FUNC_NORMAL;
+ power-source = <1>;
+ bias-pull-up;
+ };
+};
+
+&pmxr2230_flash {
+ status = "okay";
+
+ led-0 {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ led-sources = <1>, <4>;
+ led-max-microamp = <350000>;
+ flash-max-microamp = <1500000>;
+ flash-max-timeout-us = <400000>;
+ };
+};
+
+&pon_pwrkey {
+ status = "okay";
+};
+
+&pon_resin {
+ linux,code = <KEY_VOLUMEDOWN>;
+ status = "okay";
+};
+
+&qupv3_id_0 {
+ status = "okay";
+};
+
+&qupv3_id_1 {
+ status = "okay";
+};
+
+&remoteproc_adsp {
+ firmware-name = "qcom/sm7635/fairphone/fp6/adsp.mbn",
+ "qcom/sm7635/fairphone/fp6/adsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_cdsp {
+ firmware-name = "qcom/sm7635/fairphone/fp6/cdsp.mbn",
+ "qcom/sm7635/fairphone/fp6/cdsp_dtb.mbn";
+ status = "okay";
+};
+
+&remoteproc_mpss {
+ firmware-name = "qcom/sm7635/fairphone/fp6/modem.mbn";
+ status = "okay";
+};
+
+&remoteproc_wpss {
+ firmware-name = "qcom/sm7635/fairphone/fp6/wpss.mbn";
+ status = "okay";
+};
+
+&sdhc_2 {
+ cd-gpios = <&tlmm 65 GPIO_ACTIVE_HIGH>;
+
+ vmmc-supply = <&vreg_l13b>;
+ vqmmc-supply = <&vreg_l23b>;
+ no-sdio;
+ no-mmc;
+
+ pinctrl-0 = <&sdc2_default>, <&sdc2_card_det_n>;
+ pinctrl-1 = <&sdc2_sleep>, <&sdc2_card_det_n>;
+ pinctrl-names = "default", "sleep";
+
+ status = "okay";
+};
+
+&spi0 {
+ /* Eswin EPH8621 touchscreen @ 0 */
+};
+
+&tlmm {
+ /*
+ * 8-11: Fingerprint SPI
+ * 13: NC
+ * 63-64: WLAN UART
+ */
+ gpio-reserved-ranges = <8 4>, <13 1>, <63 2>;
+
+ pm8008_int_default: pm8008-int-default-state {
+ pins = "gpio125";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ sdc2_card_det_n: sdc2-card-det-state {
+ pins = "gpio65";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&uart5 {
+ status = "okay";
+};
+
+&usb_1 {
+ dr_mode = "otg";
+
+ /* USB 2.0 only */
+ qcom,select-utmi-as-pipe-clk;
+
+ status = "okay";
+};
+
+&usb_1_dwc3_hs {
+ remote-endpoint = <&pmic_glink_hs_in>;
+};
+
+&usb_1_hsphy {
+ vdd-supply = <&vreg_l2b>;
+ vdda12-supply = <&vreg_l4b>;
+
+ phys = <&pmiv0104_eusb2_repeater>;
+
+ status = "okay";
+};
--
2.50.0
Powered by blists - more mailing lists