| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250626224252.1415009-13-terry.bowman@amd.com>
Date: Thu, 26 Jun 2025 17:42:47 -0500
From: Terry Bowman <terry.bowman@....com>
To: <dave@...olabs.net>, <jonathan.cameron@...wei.com>,
<dave.jiang@...el.com>, <alison.schofield@...el.com>,
<dan.j.williams@...el.com>, <bhelgaas@...gle.com>, <shiju.jose@...wei.com>,
<ming.li@...omail.com>, <Smita.KoralahalliChannabasappa@....com>,
<rrichter@....com>, <dan.carpenter@...aro.org>,
<PradeepVineshReddy.Kodamati@....com>, <lukas@...ner.de>,
<Benjamin.Cheatham@....com>, <sathyanarayanan.kuppuswamy@...ux.intel.com>,
<terry.bowman@....com>, <linux-cxl@...r.kernel.org>
CC: <linux-kernel@...r.kernel.org>, <linux-pci@...r.kernel.org>
Subject: [PATCH v10 12/17] cxl/pci: Unify CXL trace logging for CXL Endpoints and CXL Ports
CXL currently has separate trace routines for CXL Port errors and CXL
Endpoint errors. This is inconvenient for the user because they must enable
2 sets of trace routines. Make updates to the trace logging such that a
single trace routine logs both CXL Endpoint and CXL Port protocol errors.
Keep the trace log fields 'memdev' and 'host'. While these are not accurate
for non-Endpoints the fields will remain as-is to prevent breaking userspace
RAS trace consumers.
Add serial number parameter to the trace logging. This is used for EPs
and 0 is provided for CXL port devices without a serial number.
Below is output of correctable and uncorrectable protocol error logging.
CXL Root Port and CXL Endpoint examples are included below.
Root Port:
cxl_aer_correctable_error: memdev=0000:0c:00.0 host=pci0000:0c serial: 0 status='CRC Threshold Hit'
cxl_aer_uncorrectable_error: memdev=0000:0c:00.0 host=pci0000:0c serial: 0 status: 'Cache Byte Enable Parity Error' first_error: 'Cache Byte Enable Parity Error'
Endpoint:
cxl_aer_correctable_error: memdev=mem3 host=0000:0f:00.0 serial=0 status='CRC Threshold Hit'
cxl_aer_uncorrectable_error: memdev=mem3 host=0000:0f:00.0 serial: 0 status: 'Cache Byte Enable Parity Error' first_error: 'Cache Byte Enable Parity Error'
Signed-off-by: Terry Bowman <terry.bowman@....com>
---
drivers/cxl/core/pci.c | 19 ++++-----
drivers/cxl/core/ras.c | 14 ++++---
drivers/cxl/core/trace.h | 84 +++++++++-------------------------------
3 files changed, 37 insertions(+), 80 deletions(-)
diff --git a/drivers/cxl/core/pci.c b/drivers/cxl/core/pci.c
index c9a4b528e0b8..156ce094a8b9 100644
--- a/drivers/cxl/core/pci.c
+++ b/drivers/cxl/core/pci.c
@@ -664,8 +664,8 @@ void read_cdat_data(struct cxl_port *port)
}
EXPORT_SYMBOL_NS_GPL(read_cdat_data, "CXL");
-static void cxl_handle_cor_ras(struct device *dev,
- void __iomem *ras_base)
+static void cxl_handle_cor_ras(struct device *dev, u64 serial,
+ void __iomem *ras_base)
{
void __iomem *addr;
u32 status;
@@ -679,7 +679,7 @@ static void cxl_handle_cor_ras(struct device *dev,
status = readl(addr);
if (status & CXL_RAS_CORRECTABLE_STATUS_MASK) {
writel(status & CXL_RAS_CORRECTABLE_STATUS_MASK, addr);
- trace_cxl_aer_correctable_error(to_cxl_memdev(dev), status);
+ trace_cxl_aer_correctable_error(dev, serial, status);
}
}
@@ -704,7 +704,8 @@ static void header_log_copy(void __iomem *ras_base, u32 *log)
* Log the state of the RAS status registers and prepare them to log the
* next error status. Return 1 if reset needed.
*/
-static bool cxl_handle_ras(struct device *dev, void __iomem *ras_base)
+static bool cxl_handle_ras(struct device *dev, u64 serial,
+ void __iomem *ras_base)
{
u32 hl[CXL_HEADERLOG_SIZE_U32];
void __iomem *addr;
@@ -733,7 +734,7 @@ static bool cxl_handle_ras(struct device *dev, void __iomem *ras_base)
}
header_log_copy(ras_base, hl);
- trace_cxl_aer_uncorrectable_error(to_cxl_memdev(dev), status, fe, hl);
+ trace_cxl_aer_uncorrectable_error(dev, serial, status, fe, hl);
writel(status & CXL_RAS_UNCORRECTABLE_STATUS_MASK, addr);
return true;
@@ -744,13 +745,13 @@ static bool cxl_handle_ras(struct device *dev, void __iomem *ras_base)
static void cxl_handle_rdport_cor_ras(struct cxl_dev_state *cxlds,
struct cxl_dport *dport)
{
- cxl_handle_cor_ras(&cxlds->cxlmd->dev, dport->regs.ras);
+ cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlds->serial, dport->regs.ras);
}
static bool cxl_handle_rdport_ras(struct cxl_dev_state *cxlds,
struct cxl_dport *dport)
{
- return cxl_handle_ras(&cxlds->cxlmd->dev, dport->regs.ras);
+ return cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->serial, dport->regs.ras);
}
/*
@@ -847,7 +848,7 @@ void cxl_cor_error_detected(struct pci_dev *pdev)
if (cxlds->rcd)
cxl_handle_rdport_errors(cxlds);
- cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
+ cxl_handle_cor_ras(&cxlds->cxlmd->dev, cxlds->serial, cxlds->regs.ras);
}
}
EXPORT_SYMBOL_NS_GPL(cxl_cor_error_detected, "CXL");
@@ -876,7 +877,7 @@ pci_ers_result_t cxl_error_detected(struct pci_dev *pdev,
* chance the situation is recoverable dump the status of the RAS
* capability registers and bounce the active state of the memdev.
*/
- ue = cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->regs.ras);
+ ue = cxl_handle_ras(&cxlds->cxlmd->dev, cxlds->serial, cxlds->regs.ras);
}
diff --git a/drivers/cxl/core/ras.c b/drivers/cxl/core/ras.c
index 962dc94fed8c..9588b39faabd 100644
--- a/drivers/cxl/core/ras.c
+++ b/drivers/cxl/core/ras.c
@@ -13,7 +13,7 @@ static void cxl_cper_trace_corr_port_prot_err(struct pci_dev *pdev,
{
u32 status = ras_cap.cor_status & ~ras_cap.cor_mask;
- trace_cxl_port_aer_correctable_error(&pdev->dev, status);
+ trace_cxl_aer_correctable_error(&pdev->dev, 0, status);
}
static void cxl_cper_trace_uncorr_port_prot_err(struct pci_dev *pdev,
@@ -28,8 +28,8 @@ static void cxl_cper_trace_uncorr_port_prot_err(struct pci_dev *pdev,
else
fe = status;
- trace_cxl_port_aer_uncorrectable_error(&pdev->dev, status, fe,
- ras_cap.header_log);
+ trace_cxl_aer_uncorrectable_error(&pdev->dev, 0, status, fe,
+ ras_cap.header_log);
}
static void cxl_cper_trace_corr_prot_err(struct pci_dev *pdev,
@@ -42,7 +42,8 @@ static void cxl_cper_trace_corr_prot_err(struct pci_dev *pdev,
if (!cxlds)
return;
- trace_cxl_aer_correctable_error(cxlds->cxlmd, status);
+ trace_cxl_aer_correctable_error(&cxlds->cxlmd->dev, cxlds->serial,
+ status);
}
static void cxl_cper_trace_uncorr_prot_err(struct pci_dev *pdev,
@@ -62,8 +63,9 @@ static void cxl_cper_trace_uncorr_prot_err(struct pci_dev *pdev,
else
fe = status;
- trace_cxl_aer_uncorrectable_error(cxlds->cxlmd, status, fe,
- ras_cap.header_log);
+ trace_cxl_aer_uncorrectable_error(&cxlds->cxlmd->dev,
+ cxlds->serial, status,
+ fe, ras_cap.header_log);
}
static void cxl_cper_handle_prot_err(struct cxl_cper_prot_err_work_data *data)
diff --git a/drivers/cxl/core/trace.h b/drivers/cxl/core/trace.h
index 25ebfbc1616c..494d6db461a7 100644
--- a/drivers/cxl/core/trace.h
+++ b/drivers/cxl/core/trace.h
@@ -48,49 +48,22 @@
{ CXL_RAS_UC_IDE_RX_ERR, "IDE Rx Error" } \
)
-TRACE_EVENT(cxl_port_aer_uncorrectable_error,
- TP_PROTO(struct device *dev, u32 status, u32 fe, u32 *hl),
- TP_ARGS(dev, status, fe, hl),
- TP_STRUCT__entry(
- __string(device, dev_name(dev))
- __string(host, dev_name(dev->parent))
- __field(u32, status)
- __field(u32, first_error)
- __array(u32, header_log, CXL_HEADERLOG_SIZE_U32)
- ),
- TP_fast_assign(
- __assign_str(device);
- __assign_str(host);
- __entry->status = status;
- __entry->first_error = fe;
- /*
- * Embed the 512B headerlog data for user app retrieval and
- * parsing, but no need to print this in the trace buffer.
- */
- memcpy(__entry->header_log, hl, CXL_HEADERLOG_SIZE);
- ),
- TP_printk("device=%s host=%s status: '%s' first_error: '%s'",
- __get_str(device), __get_str(host),
- show_uc_errs(__entry->status),
- show_uc_errs(__entry->first_error)
- )
-);
-
TRACE_EVENT(cxl_aer_uncorrectable_error,
- TP_PROTO(const struct cxl_memdev *cxlmd, u32 status, u32 fe, u32 *hl),
- TP_ARGS(cxlmd, status, fe, hl),
+ TP_PROTO(struct device *dev, u64 serial, u32 status, u32 fe,
+ u32 *hl),
+ TP_ARGS(dev, serial, status, fe, hl),
TP_STRUCT__entry(
- __string(memdev, dev_name(&cxlmd->dev))
- __string(host, dev_name(cxlmd->dev.parent))
+ __string(name, dev_name(dev))
+ __string(parent, dev_name(dev->parent))
__field(u64, serial)
__field(u32, status)
__field(u32, first_error)
__array(u32, header_log, CXL_HEADERLOG_SIZE_U32)
),
TP_fast_assign(
- __assign_str(memdev);
- __assign_str(host);
- __entry->serial = cxlmd->cxlds->serial;
+ __assign_str(name);
+ __assign_str(parent);
+ __entry->serial = serial;
__entry->status = status;
__entry->first_error = fe;
/*
@@ -99,8 +72,8 @@ TRACE_EVENT(cxl_aer_uncorrectable_error,
*/
memcpy(__entry->header_log, hl, CXL_HEADERLOG_SIZE);
),
- TP_printk("memdev=%s host=%s serial=%lld: status: '%s' first_error: '%s'",
- __get_str(memdev), __get_str(host), __entry->serial,
+ TP_printk("memdev=%s host=%s serial=%lld status='%s' first_error='%s'",
+ __get_str(name), __get_str(parent), __entry->serial,
show_uc_errs(__entry->status),
show_uc_errs(__entry->first_error)
)
@@ -124,42 +97,23 @@ TRACE_EVENT(cxl_aer_uncorrectable_error,
{ CXL_RAS_CE_PHYS_LAYER_ERR, "Received Error From Physical Layer" } \
)
-TRACE_EVENT(cxl_port_aer_correctable_error,
- TP_PROTO(struct device *dev, u32 status),
- TP_ARGS(dev, status),
- TP_STRUCT__entry(
- __string(device, dev_name(dev))
- __string(host, dev_name(dev->parent))
- __field(u32, status)
- ),
- TP_fast_assign(
- __assign_str(device);
- __assign_str(host);
- __entry->status = status;
- ),
- TP_printk("device=%s host=%s status='%s'",
- __get_str(device), __get_str(host),
- show_ce_errs(__entry->status)
- )
-);
-
TRACE_EVENT(cxl_aer_correctable_error,
- TP_PROTO(const struct cxl_memdev *cxlmd, u32 status),
- TP_ARGS(cxlmd, status),
+ TP_PROTO(struct device *dev, u64 serial, u32 status),
+ TP_ARGS(dev, serial, status),
TP_STRUCT__entry(
- __string(memdev, dev_name(&cxlmd->dev))
- __string(host, dev_name(cxlmd->dev.parent))
+ __string(name, dev_name(dev))
+ __string(parent, dev_name(dev->parent))
__field(u64, serial)
__field(u32, status)
),
TP_fast_assign(
- __assign_str(memdev);
- __assign_str(host);
- __entry->serial = cxlmd->cxlds->serial;
+ __assign_str(name);
+ __assign_str(parent);
+ __entry->serial = serial;
__entry->status = status;
),
- TP_printk("memdev=%s host=%s serial=%lld: status: '%s'",
- __get_str(memdev), __get_str(host), __entry->serial,
+ TP_printk("memdev=%s host=%s serial=%lld status='%s'",
+ __get_str(name), __get_str(parent), __entry->serial,
show_ce_errs(__entry->status)
)
);
--
2.34.1
Powered by blists - more mailing lists