[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250627142309.1444135-1-elder@riscstar.com>
Date: Fri, 27 Jun 2025 09:22:59 -0500
From: Alex Elder <elder@...cstar.com>
To: lee@...nel.org,
lgirdwood@...il.com,
broonie@...nel.org,
alexandre.belloni@...tlin.com,
robh@...nel.org,
krzk+dt@...nel.org,
conor+dt@...nel.org
Cc: mat.jonczyk@...pl,
dlan@...too.org,
paul.walmsley@...ive.com,
palmer@...belt.com,
aou@...s.berkeley.edu,
alex@...ti.fr,
troymitchell988@...il.com,
guodong@...cstar.com,
linux-rtc@...r.kernel.org,
devicetree@...r.kernel.org,
linux-riscv@...ts.infradead.org,
spacemit@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: [PATCH v6 0/8] spacemit: introduce P1 PMIC support
The SpacemiT P1 is an I2C-controlled PMIC that implements 6 buck
converters and 12 LDOs. It contains a load switch, ADC channels,
GPIOs, a real-time clock, and a watchdog timer.
This series introduces a multifunction driver for the P1 PMIC as well
as drivers for its regulators and RTC.
This version adds a new patch to change the simple MFD driver as
suggested by Lee Jones. Rather than specifying a full regmap config
for each simple MFD, specify the max_register value desired in the
simple_mfd_data structure. That supports all existing devices (which
don't use the regmap_config option), as well as the SpacemiT P1
(which specifies the max_register).
-Alex
This series is available here:
https://github.com/riscstar/linux/tree/outgoing/pmic-v6
Between version 5 and version 6:
- Added Rob Herring's reviewed-by to patch 1
- Add the simple MFD functionality suggested by Lee Jones
- Update patch 3 (previously 2) accordingly
Here is version 5 of this series:
https://lore.kernel.org/lkml/20250625164119.1068842-1-elder@riscstar.com/
Between version 4 and version 5:
- Only check the seconds register for change when looping on read
- Return without re-enabling the RTC if writing registers fails
- If the RTC is disabled when reading, return an error
Here is version 4 of this series:
https://lore.kernel.org/lkml/20250625164119.1068842-1-elder@riscstar.com/
More complete history is available at that link.
Alex Elder (8):
dt-bindings: mfd: add support the SpacemiT P1 PMIC
mfd: simple-mfd-i2c: specify max_register
mfd: simple-mfd-i2c: add SpacemiT P1 support
regulator: spacemit: support SpacemiT P1 regulators
rtc: spacemit: support the SpacemiT P1 RTC
riscv: dts: spacemit: enable the i2c8 adapter
riscv: dts: spacemit: define fixed regulators
riscv: dts: spacemit: define regulator constraints
.../devicetree/bindings/mfd/spacemit,p1.yaml | 86 +++++++++
.../boot/dts/spacemit/k1-bananapi-f3.dts | 138 +++++++++++++++
arch/riscv/boot/dts/spacemit/k1-pinctrl.dtsi | 7 +
arch/riscv/boot/dts/spacemit/k1.dtsi | 11 ++
drivers/mfd/Kconfig | 11 ++
drivers/mfd/simple-mfd-i2c.c | 30 ++--
drivers/mfd/simple-mfd-i2c.h | 2 +-
drivers/regulator/Kconfig | 12 ++
drivers/regulator/Makefile | 1 +
drivers/regulator/spacemit-p1.c | 157 ++++++++++++++++
drivers/rtc/Kconfig | 10 ++
drivers/rtc/Makefile | 1 +
drivers/rtc/rtc-spacemit-p1.c | 167 ++++++++++++++++++
13 files changed, 620 insertions(+), 13 deletions(-)
create mode 100644 Documentation/devicetree/bindings/mfd/spacemit,p1.yaml
create mode 100644 drivers/regulator/spacemit-p1.c
create mode 100644 drivers/rtc/rtc-spacemit-p1.c
base-commit: 2aeda9592360c200085898a258c4754bfe879921
--
2.45.2
Powered by blists - more mailing lists